Amplifiers

PA−120Z is a high−performance selectable Hi−Z (70V/100V) or Lo−Z (4Ω/8Ω) power amplifier featuring balanced and unbalanced inputs and additional line−level output. This versatile amplifier features built−in DSP auto−standby and maximum durability. PA−120Z is suitable for a vast range of AV installations.

• High–performance Amplifier — With built–in DSP and additional balanced stereo line–level output. PA–120Z features flat frequency response unmatched sonic performance excellent signal to noise ratio and extraordinarily low distortion levels.

• Adaptable to Any AV Installation — Switch …

Styled after the iconic Laney Lionheart range, the Laney Ministack is a small amp with a big sound, Bluetooth enabled and perfect for anywhere in the house, backstage or practice. The Ministack-B-Lion model features a clean & drive channel, gain, tone and volume dial, guitar input, Aux in, On-board tape style digital delay with level control, headphone socket and the unique Laney LSI – Laney Smartphone Insert. The LSI allows you to connect your amp to your favourite guitar tone generating app to access all your favourite guitar tones.
Controls: Tone;Volume;Level;Gain;Drive;Delay;Delay Level
Battery Operation: Yes
Bluetooth: Yes
Headphone Output: Yes
Built-in Effects: Yes
Width (mm): 205.…

Compact 50-watt combo amp with expanded performance features over the Katana-50 Gen 3 model. With Katana Gen 3, the acclaimed BOSS stage amplifier series evolves to take your guitar ambitions to the next level. New Tube Logic enhancements enrich the core platform with even greater sound, feel, and response, including an expressive Pushed amp character that edge-of-breakup fans will love. The BOSS Tone Studio app has also been updated, making your remote amp and effects editing workflow more intuitive than ever. Loaded with inspiring tone tools and diverse connectivity options, Katana Gen 3 is your indispensable centerpiece for studio recording, live performance, and daily practice.The Katana-50 …

Microphone Pre-Amp / Desktop / Number of Channels 1

Focusrite Clarett OCTOPRE is an 8-channel microphone preamplifier and AD / DA converter with ADAT digital interface. Clarett's leading preamplifiers operate at 24 bit / 192 kHz and offer a dynamic range of up to 118 dB. AIR technology, which adds airiness and clarity to recordings, emulates the impedance and resonance characteristics of the legendary Focusrite ISA analogue studio preamplifier. Two analog inputs located on the front panel are capable of processing both microphone and direct instrument (Hi-Z) signals.

The transmitter has eight analog inputs with combined XLR / TRS connectors. Each input channel is equipped with insertion points for connecting external processors. The signal can …

The Radial JDI Duplex is a full-feature, stereo passive direct box designed to enhance connectivity, reduce noise, and simplify the hectic life of the touring professional, broadcast engineer or AV integrator. It is plug-and-play easy to use while delivering the utmost sonic quality. Like the Radial JDI, the Duplex employs two high-performance Jensen audio transformers with the same pristine audio signal path that has made the JDI the industry standard. It features exceptional signal handling with virtually zero phase shift or harmonic distortion, while remaining linear across the entire audio spectrum. When driven to extremes, the natural transformer saturation and resulting warm Bessel curve …

The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. A Connect amplifier it employs our Connect IP interface a web application which can be accessed by any device connected to the internet with a web browser on the same network.

PLX2800 power amplifier, 2 x 1050W @ 4 Ohms

19" rackmount 2U power amplifiers with dual fan cooling and class H architecture for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. High power output stable down to 2 Ohms load per side can also be bridged mono to 4 Ohms. Switchable ground lift, bridge mode and clip limiter.
Bridge mode for high power mono operation
Output stable down to 2 Ohms
Removable handles for low profile install
Switchable clip limiter
Power rms @ 2 Ohms - 2 x 1400W
Power rms @ 4 Ohms - 2 x 1050W
Power rms @ 8 Ohms - 2 x 600W
Power rms bridge @ 4 Ohms - 2300W
Power rms bridge …

The DN200 has become an established favorite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN200 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN200 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 KΩ load. This increased headroom means that much higher-level input signals can be accommodated without the need for an attenuating …

The 710 Twin Finity is a tube / FET preamplifier, uniquely combining the classic "warmth" UA lamp part and semiconductor circuits with the possibility of a smooth transition between them, all enclosed in a solid 2U half-rack tin box. The 710 has been specially designed for absolute versatility and high sound variability during basic preamp processing.Preamp combining electron and transistor circuit with the possibility of continuous combinationGain and Level control for maximum tonal versatilityHi-Z input for direct tool connection70dB + gain, + 48V phantom power, pad (15dB), phase switching and highpass filter (75Hz)XLR microphone input, XLR line input, and XLR line output on the backTop quality …