Reels PENN

The Squall® II Lever Drag reel is a powerful reel in a lightweight and ergonomic package.The Squall® II LD reel is made from graphite for its lightweight and corrosion resistant benefits.Don´t let the lightweight frame fool you from the power packed in this reel, with stainless steel main and pinion gears in combination with the PENN® Dura-Drag™ system.Ranging in sizes from 25N to 60, and now with a 40N High Speed model, there is an option for every angler needing to tame the creatures from below.It doesn´t matter if you are fishing wrecks for conger eels or dropping baits down for cod, ling or sharks, the new Squall® II Lever Drag got you covered.

Gear Ratio: 5, 6: 2
Full metal housing - multi-stop system.
Line capacity: .36/205 - .46/125 (mm/m).

The PENN®® Spinfisher® VII Spinning features IPX5 sealing so whether it gets hit with a wave, or you let it ride in the spray all the way home, you don't have to worry about saltwater getting into the gearbox or drag system. Our HT-100™ drag washers are housed in a fully sealed spool to give the stopping power needed for big saltwater fish. A Full Metal Body and sideplate keep the CNC Gear System in precise alignment under heavy loads. IPX5 Sealed body and spool design CNC Gear Technology with brass main gear HT-100™ carbon fiber drag washers 5+1 sealed stainless steel ball bearing system Full Metal Body Superline Spool

Saltwater Anglers Choose The Penn® Fierce™ Iv Spinning Reels Because They Want A Platform That Gets The Job Done. The Reels Boast A Full Metal Body And Sideplate And Is Paired With The Penn® Ht-100™ Drag To Give Superior Performance Under The Strongest.Features: - Full Metal Body And Sideplates- Ht-100™ Carbon Fiber Drag Washers- Techno-Balanced™ Rotor Gives Smooth Retrieves- 4 Sealed Stainless Steel Ball Bearings- Instant Anti-Reverse Bearing- Superline Spool- Ll Models Have Live Liner FeatureSpecifications:- Anti-Reverse Feature: Instant Anti-Reverse- Bearing Count: 5- Braid Capacity Yd/Lb: 160/6 130/8 110/10- Dam Schematic Id: Pen Sp Frciv1000 00- Drag Material: Ht-100- Drag Type: Front Drag…

The powerful sealed HT-100 multi-disk carbon drag system in the front of the reel ensures a smooth line take even while fighting big saltwater predators.
The Pursuit IV has an ultra lightweight corrosion-resistance graphite body construction, machined and anodized aluminium spool and powerful sealed HT-100 drag system which makes this reel perfectly saltwater resistant and ready for your saltwater fishing adventures.
The 4 quality sealed stainless steel ball bearings make the reel rotate smooth as butter, while the instant anti-reverse bearing eliminates even the slightest rotor back play for instant hook-ups every time.
The Line Capacity Rings on the spool let you know how much line you …

Gear Ratio: 6, 2: 2
Line capacity: .20/220 - .28/115 (mm/m)
Weight: 275 g

The PENN® Spinfisher® VII Spinning features IPX5 sealing so whether it gets hit with a wave, or you let it ride in the spray all the way home, you don´t have to worry about saltwater getting into the gearbox or drag system.Our HT-100™ drag washers are housed in a fully sealed spool to give the stopping power needed for big saltwater fish.A Full Metal Body and sideplate keep the CNC Gear System in precise alignment under heavy loads.Available in standard, Live Liner, and Long Cast models.

Saltwater Anglers Choose The Penn® Fierce™ Iv Spinning Reels Because They Want A Platform That Gets The Job Done. The Reels Boast A Full Metal Body And Sideplate And Is Paired With The Penn® Ht-100™ Drag To Give Superior Performance Under The Strongest.Features: - Full Metal Body And Sideplates- Ht-100™ Carbon Fiber Drag Washers- Techno-Balanced™ Rotor Gives Smooth Retrieves- 4 Sealed Stainless Steel Ball Bearings- Instant Anti-Reverse Bearing- Superline Spool- Ll Models Have Live Liner FeatureSpecifications:- Anti-Reverse Feature: Instant Anti-Reverse- Bearing Count: 5- Braid Capacity Yd/Lb: 160/6 130/8 110/10- Dam Schematic Id: Pen Sp Frciv1000 00- Drag Material: Ht-100- Drag Type: Front Drag…

The All-New Fathom™ Ii Lever Drag Reels Take A Class-Leading Reel And Raise The Bar Even More. New Models, Sizing, Features, And Optimized Billfish Models Round Out The Assortment To Give A Model For Every Application. Integrating The Palm Side Plate And Frame Allows The Fathom™ Ii Lever Drag Reels To Be More Compact In Hand And Increases Strength. The Pull-To-Turn Preset Knobs Allow The Angler To Truly Set It, And Forget It. At The Fathom´s™ Core Is A Stainless Steel Main And Pinion Gear And A Forged And Machined Aluminum Spool For Maximum Durability.Features: - One-Piece Machined Aluminum Frame And Sideplate For The Ultimate In Gear Strength- Dura-Drag™ System- Stainless Steel Main And Pinio…

The PENN Affinity III is a fantastic longcast reel equipped with the best features to make this reel as durable as possible.The Quick and smooth HT-100 drag system, which is fully sealed, will give you the best experience of fighting a big carp you can imagine, over and over again.Due to the 7 sealed stainless steel ball bearings including an instant anti-reverse bearing, the Affinity III runs very smooth, even under pressure.Because of the extra slow oscillation system in combination with the Long Stroke spool, a perfect line lay is created with both mono and braided lines, resulting in extreme casting distance.As well, the reel is saltwater resistant to minimize long term corrosion.Ideal for …

The PENN® Spinfisher® VII Spinning features IPX5 sealing so whether it gets hit with a wave, or you let it ride in the spray all the way home, you don´t have to worry about saltwater getting into the gearbox or drag system.Our HT-100™ drag washers are housed in a fully sealed spool to give the stopping power needed for big saltwater fish.A Full Metal Body and sideplate keep the CNC Gear System in precise alignment under heavy loads.Available in standard, Live Liner, and Long Cast models.

Affinity III Spod 8000 Longcast.The PENN Affinity III Spod is a fantastic longcast reel that has been especially designed for spodding and marking.It is equipped with the best features to make this reel as durable as possible.Cosmetically it matches perfectly with the Affinity III reels, but some major upgrades have been made to make this reel the best in class for spodding.First of all, the reel has an extremely highGear ratio of 5.0 per turn, resulting in a retrieve speed of 120cm per turn.Next to that, the large egg-shaped handle knobGives extraGrip and comfort for fast retrieving.However, where this reel really differentiates from the competition is that we have used out patented and super …

The PENN® Wrath® II was built around an affordable platform while emphasizing the legendary PENN® durability you´ve come to know.Featuring a lightweight and corrosion resistant body with a machined and anodized aluminum spool, these reels will give you power you need when fishing anywhere from river to coast.The 2+1 shielded stainless steel bearing and instant anti-reverse provide a smooth and reliable gear system.With all new cosmetics, and sizes ranging from 2500 to 8000, you´ll be able to bring your Wrath® to anything with fins.

The All-New Fathom™ Ii Lever Drag Reels Take A Class-Leading Reel And Raise The Bar Even More. New Models, Sizing, Features, And Optimized Billfish Models Round Out The Assortment To Give A Model For Every Application. Integrating The Palm Side Plate And Frame Allows The Fathom™ Ii Lever Drag Reels To Be More Compact In Hand And Increases Strength. The Pull-To-Turn Preset Knobs Allow The Angler To Truly Set It, And Forget It. At The Fathom´s™ Core Is A Stainless Steel Main And Pinion Gear And A Forged And Machined Aluminum Spool For Maximum Durability.Features: - One-Piece Machined Aluminum Frame And Sideplate For The Ultimate In Gear Strength- Dura-Drag™ System- Stainless Steel Main And Pinio…