Car Service Station Equipment Powertec

Easy to use panel stand, for use during preparation and painting. It features two adjustable arms to support and hold the panel, together with a unique swivel device which allows the panel to be rotated 180 for access. The slim-line design also features a fold-away leg making it easy to stow when not in use.Adjustable panel stand, rotates 180 to allow access during preparation & painting.Two wheel fold-away design, making it easy to store when not in use.High quality steel construction. Maximum load capacity: 100kg.Made in Denmark.Additional brackets & accessories available separately, please see Part Nos. 92654 (Trim & Spoiler Kit), 92655 (Snapgrip), 92656 (Press Out Holding Tool).

C-clamp welding pliers, designed to be used as a shunting clamp to provide a current path between two panels that have been coated with a non-conductive corrosion resistant coating during the spot welding process (STRSW). By carrying the current through the clamp and around the panels, the corrosion resistant coating does not have to be removed on the inner surfaces of the spot weld, creating a stronger and longer lasting weld.Allows the spot welding of E-coat steel without removing the E-coat.Simply remove just the E-coat from the outer surfaces. Speeds up the repair process of E-coated steels.The shunting clamps enable the electrical current to flow from one side to the other ensuring a good,…

50g of cold glue, suitable for use as part of a paintless dent repair (PDR) or automotive body repair. Used as an alternative to a hot glue system, this sticky adhesive is warmed up in the user's hands before use.For use with most PDR dent removal kits, such as Power-Tec Part No. 92645.No need for external heat source, gas or electrical power.The glue is easily removed by hand.The glue can be re-used if kept clean and free from grease.Supplied in metal storage tin.

An innovative PDR dent puller kit that uses cold glue rather than hot glue. With only the heat from the user's hands required to prep the glue for use, no external heat source is required. The kit includes a guide handle together with slide hammer for dent pulling, and is supplied in a rugged blow mould storage case.Paintless dent removal using hand warmed 'cold glue'.Kit includes: 4 alloy glue adaptor pads, slide hammer, hand-pull handle & 50g of cold glue.No need for external heat source, gas or electrical power.Glue is easily removed by hand & can be reused if kept clean and free from grease.Replacement glue available, see Power-Tec Part No. 92646.

A rechargeable PDR percussion gun with eight interchangeable heads to gently tap down high spots in vehicle body panels as part of a paintless dent repair. It features a powerful high-torque motor which uses noise reduction technology, to run at a quiet 30db (max), and has 4 different speed settings to deliver between 1800 and 3200 percussions per minute.Handheld percussion gun suitable for paintless dent removal, ideal for mobile use.Features a high torque silent motor which has 4 different speed settings.Includes 4x hard plastic & 4x alloy adaptor heads to knock down high spots without damaging paint.Run time: 4 hours (low speed). Powered by built in rechargeable 2000mAh lithium-ion (Li-ion) …

Nylon windscreen cutting wire, suitable for cutting through the urethane bond in order to remove the windscreen from the vehicle. Provides a less aggressive solution than traditional metal cutting wires enabling it to be used safely on carbon fibre and aluminium bodies and reducing the risk of causing damage to paintwork, plastic trim, or pinch welds.Reusable nylon cut out wire for glass & trim removal, ideal for more sensitive work areas.Length: 50 metre roll.Safer to use than traditional cutting wire. Line will not coil back or retract if it breaks.Will not damage paint work or trim; can be used on aluminium/carbon fibre bodies.Performance comparable to metal cutting wires.

This adaptor enables glue pads to be fitted to a lever pulling bar, such as the Power-TEC Lift & Pull, allowing for dents and dings in bodywork to be gently pulled out without causing damage to the paintwork.Glue Pad adaptor suitable for use with Power-TEC Lift & Pull Dent Kit, Part No. 92377, as part of a hot glue dent removal repair.Can be used with other pullers with M14 thread.Glue pads available separately, please see Part Nos. 91238, 92378, 92401, 92344, 92638, 92637.Suitable for use with Power-TEC Gluematic Glue Gun, Part No. 91237 & glue sticks, Part No. 92342.For the removal of the glue after use, please see Power-TEC Hot Melt Glue Remover, Part No. 92341.

An assorted set of round, high grip suction cups with improved contact surface between cup and glue, increasing the applicable traction force on paintless dent repair.Set comprises 5 each of 4 diameter pads: 16, 21, 26, 32mmHigher contact surface with the glue provides higher resistance.Reinforced collar allows greater force from pulling system.Suitable for use with Power-TEC Gluematic Glue Gun, Part No. 91237 & glue sticks, Part No. 92342.Pads can be removed with a release spray, leaving the panel intact & paint undisturbed, Part No. 92314. Set of oval pads available, Part No. 92637.

An assorted set of oval, high grip suction cups with improved contact surface between cup and glue, increasing the applicable traction force on paintless dent repair.Set comprises 5 each of 4 sizes (l x w): 18 x 9, 26 x 13, 32 x 16, 42 x 21mmHigher contact surface with the glue provides higher resistance.Reinforced collar allows greater force from pulling system.Suitable for use with Power-TEC Gluematic Glue Gun, Part No. 91237 & glue sticks, Part No. 92342.Pads can be removed with a release spray, leaving the panel intact & paint undisturbed, Part No. 92314. Set of round pads available, Part No. 92638.

This magnetic clamp can be used to hold the spot earth tightly against the bodywork panel or metal work being welded, helping to keep it in place for the duration of the repair, ensuring that it remains securely earthed.Spot earth incorporating a magnetic clamp.Fix to your existing panel repair system.Ideal for use with Evo Miracle Welder, Part No. 91743 & Combi-Star Welder, Part No. 92510.Sand off small area, using welder gun as earth, weld point of Spot Earth to panel.Replacement copper screw available, please see Part No. 91849.

This masking paper dispenser trolley features large rugged wheels making it easy to manoeuvre around the bodyshop and spray booth to allow for the paper and tape to measured out and applied directly to the vehicle, minimising any possible contamination. It features 4 masking tape holders which enable the tape to be automatically applied to the side edges of the masking paper, 2 serrated cutting blades, and 2 storage trays to ensure easy access to any additional items that maybe required whilst masking a vehicle.Takes 2 rolls of 450mm masking paper.Automatically applies masking tape along the edges of the paper.Tubular steel construction, complete with sharp cutting blades & 2 storage trays.Max …

This large wall mounted masking paper dispenser features 2 racks each capable of holding a roll of masking paper up to 1200mm wide. The racks are fitted with a serrated cutting blade and a masking tape holder which enables the tape to automatically applied to a single edge of the masking paper. Alternatively the lower rack can be used to dispense 2 smaller width rolls using the additional fittings supplied.Adjustable masking paper dispenser, can hold a maximum of 3 rolls.Upper rack supports roll width up to 1200mm, lower rack 1200mm or 300mm + 600mm. Inner core: 20mm.Automatically applies masking tape along the edge of the paper & features 2 serrated cutting blades.Overall size: 1500 x 870 x …

This tool is designed for folding paint masking tape with a soft edge which slightly lifts up the tape to allow the paint spray to disperse avoiding a hard tape line or paint build up, making it easier to fade out paint and blend in with cutting compound, saving both time and tape versus folding the tape by hand. It features a handle allowing it to be used in-situ, together with mounting points and fixings so that it can be mounted to a workshop bench or wall.Special design automatically folds a soft edge into the tape when pulling through the dispenser to avoid a hard tape line.Tape holder suitable for use with 25mm masking tape.Features a sharp serrated blade allowing the tape to be easily …

Ability to do 1500 welding points, with 100% charged battery. Battery charge time: approx 90 mins.Welding current values of 2500 amps.No consumption / absorption on the 16 Ampere power line.Colour LEDs for signaling the various operations. Lightweight: 2.9kg.Supplied in a case with the battery charger module. Extended 2 year warranty or 120,000 welds.

2 interchangeable nozzles: short & longer 112mm long with anti-marring tip. Lightweight aluminium body (0.16kg), with anti-slip ergonomic handle. Max pressure: 10 bar (145psi); working pressure: 6.3 bar (91psi). Air flow regulator: low & high. Air consumption: 330L/min; noise level: 86dB. Includes additional upper air inlet providing greater accessibility when using airline from above. Supplied with Euro type coupler. BSP coupler available separately, please see Connect Part No. 30951.

Max RPM: 4000.Size: 88mm diameter x 15mm deep.Shank: 5/16" x 24T shank; inlcudes adaptor for drill use.Ideal for removing stripes/stickers, moulding glue etc.

Headlight beam setter for cars, LCV and HGV vehicles. Quick and easy to use on all types of headlight including LED, Xenon and Halogen, and front fog lights. Suitable for both left and right hand drive vehicles.Ideal for bodyshops and garages after accident repair, front end strip down, headlight replacement and pre-MOT checks.Vertically adjustable light box with adjustable checking panel. Wheeled base to allow easy checking of both sides.High precision glass visor & digital light meter.Beam set height: 230 - 1460mm.Working floor area must be flat and level. Maximum deviation: less than 1mm/m for vehicle area & less than 0.5mm/m for the beam setter area for accurate measurement.

Magnetic electrode suitable for use with M3-M5 Moulding Rivets.For use with 3 x 4.5 Trim Rivets, please see Part No. 92619.Also suitable for 2.5mm nails.Part of a larger pulling consumables kit, please see Connect Part No. 34998.Ideal for use with panel repair welders, please see Part No. 91743, 92605, 92546 & 92510.

Trim Rivets.Size: 3 x 4.5mm.Pack of 100.Coppered steel.Use with adaptor 92620.

5 x 12mm.Coppered Steel.50pcs.Use with adaptor 91221.

2 x Shrinking tip.Copper plated.For use with Power-TEC Tec-Spot Welder, Part No. 92314.Part of larger pulling consumables kit, please see Connect Part No. 34997.

Straight type washer.Copper plated.For use with Power-TEC Tec-Spot Welder, Part No. 92314.Part of larger pulling consumables kit, please see Connect Part No. 34997.

Air inlet: 1/4" BSP; suitable for most types of coating canisters.30cm long flexible hose allows spraying into hard to reach areas.Recommended air pressure: 90psi (6.2 bar); rated pressure: 60 - 120psi (4.1 - 8.2 bar).Adjustable nozzle allows for use with various coating viscosities. Nickel coated, with easy grip trigger.

Size: 114 x 71mm. Cut any abrasive paper to fit.Fast quick change function - simply twist the grip to release, insert abrasive paper & twist back to lock.Contoured grip allows even pressure distribution.Manufactured from durable, rigid ABS material, with ergonomic comfort grip handle.Ideal where an even pressure over the full working area is required.