Car Service Station Equipment Powertec

For use on either steel or aluminium metal surfaces with flat or curved profiles.Auto detection of base material: ferrous (steel, etc) and non-ferrous (aluminium, copper, etc) metals.Applications include but not limited to: automotive bodywork, commodity inspection, manufacturing. Ideal for both workshop & outdoor use.Contents include: 2x calibration base (F/NF), 5 x standard calibration foil.Requires 2 x AAA batteries (included). Please refer to instructions for use & technical specification.

Sizes: 25, 38, 50, 75, 100mm x 75mm long.Simply weld on to panel, slide the pull clamp on to plate and pull.Additional sizes available - please see Power-TEC Part Nos. 92598 (25mm), 92599 (38mm), 92600 (50mm), 92601 (75mm), 92602 (100mm).

Size: 100mm x 75mm long.Simply weld on to panel, slide the pull clamp on to plate and pull.Additional sizes available - please see Power-TEC Part Nos. 92598 (25mm), 92599 (38mm), 92600 (50mm), 92601 (75mm), 92603 (5pc set).

Size: 75mm x 75mm long.Simply weld on to panel, slide the pull clamp on to plate and pull.Additional sizes available - please see Power-TEC Part Nos. 92598 (25mm), 92599 (38mm), 92600 (50mm), 92602 (100mm), 92603 (5pc set).

Size: 50mm x 75mm long.Simply weld on to panel, slide the pull clamp on to plate and pull.Additional sizes available - please see Power-TEC Part Nos. 92598 (25mm), 92599 (38mm), 92601 (75mm), 92602 (100mm), 92603 (5pc set).

Size: 38mm x 75mm long.Simply weld on to panel, slide the pull clamp on to plate and pull.Additional sizes available - please see Power-TEC Part Nos. 92598 (25mm), 92600 (50mm), 92601 (75mm), 92602 (100mm), 92603 (5pc set).

Size: 25mm x 75mm long.Simply weld on to panel, slide the pull clamp on to plate and pull.Additional sizes available - please see Power-TEC Part Nos. 92599 (38mm), 92600 (50mm), 92601 (75mm), 92602 (100mm), 92603 (5pc set).

Set includes pull clamp and 3 pull plates. Capacity: 3 tonnes.Pull clamp: 135 x 75mm x 20mm thick.Pull plate sizes: 25, 38, 50mm wide x 75mm long.Pull plates are reusable.Spare & different sized plates available - please see Power-TeC Part Nos. 92598 (25mm), 92599 (38mm), 92600 (50mm), 92601 (75mm), 92602 (100mm), 92603 (5pc set).

Hammer face includes special spiralling, to aid shrinking. Overall length: 295mm. Head width: 114mm, face diameter: 41mm. Weight: 0.4kg. Oak handle.

Bodywork rubber mallet also known as a bumping mallet, ideal for working on weatherstrips, bumpers or trim in bodyshops. non marring rubber mallet with large flat contact area to spread the shock loading.Mallet head made special rubber filler that is elastic in nature but hard in use.Rubber material helps to avoid damage or scratching (non marring) when working on bumpers, panels & other car bodywork or trim.Ideal for pushing in & fixing vehicle door weatherstrips, bumpers or trim, or for fitting upholstery & trims to vehicle seats.Length: 260mm; weight: 654g.Soft grip flexible handle. Spare head available - please see Power-TEC Part No. 91053.

4 drawer welding cart suitable for storing and transporting a welder, gas bottle, tools and consumables.Overall size: 700 x 290 x 710mm. Maximum capacity: 80kg.Incorporates 4 drawers (280 x 180mm) with lock for easy access to supplies & secure storage.Chain diameter: 3mm.Features hooks for holding cables and hoses.Tilted top shelf for easy access.

Cutter sizes: 27, 28.1, 29.3, 38.9mm. Applications include: Skoda, VW. Cuts plastic up to 5mm thick. For use with Power-TEC PDC kit, Part No. 92489. Add-on PDC cutter set, expanding the existing range of Power-TEC Parking Sensor Cutter Kit (92489).

Hole cutter sizes: 17, 18, 18.2, 19, 20, 22.5, 24, 26, 26.7, 27, 28.1, 29.3, 32, 38.9mm. Applications include: BMW, Citron, Peugeot, Seat, Skoda, Toyota, Vauxhall, Opel, VW. Cuts plastic up to 5mm thick. 5/16" HSS drill bit included for drilling pilot hole. Force screw and nut available separately, please see Power-TEC Part No. 91044.

Pinchweld trimming set, comprising handle, 4 blades & 'L' hex key. Blades: 3 winged blades: 13, 19, 25mm & wide prep blade: 40mm. Blades specially designed to help prevent damage to paint while removing urethane after windscreen removal. Blades easily switchable within the handle and secured with hex screw. Leaves the correct thickness of adhesive for re-bonding.

Sanding block 150mm, incorprating hose connector for dust free sanding. Designed for use with standard 150mm diameter hook and loop sanding discs. Right angled sides & rigid perforated base matches disc profiles. Ergonomic hand profile for ease of use. Standard 150mm sanding block available - see PowerTEC Part No. 91387.

Maximum flatting with our largest ever sanding block - 775mm x 115mm. Rigid block hook faced. Ideal for large areas to ensure consistent finish. Extend the length by joining two blocks together, using extension kit - PowerTEC Part No. 92582.

Avoid costly accidental damage during welding, cutting and grinding jobs.Yellow vermiculate coated and temperature resistant to 1000C. Material 100% glass fibres.Anti-allergy and asbestos free.Size: 3m x 2m x 1.08mm thick.Weight: 1100g/m.Manufactured to BSEN 476-7.

Yellow - medium cut, for polishing & buffing. Cylinder polishing pad: 23 x 42mm. Tapered polishing pad: 14-23mm x 42mm. For use with Pneumatic Detail Polisher - PowerTEC Part No. 92559.

Red - extra fine cut, for polishing & buffing. Cylinder polishing pad: 23 x 42mm. Tapered polishing pad: 14-23mm x 42mm. For use with Pneumatic Detail Polisher - PowerTEC Part No. 92559.

Blue - fine cut, for polishing & buffing. Cylinder polishing pad: 23 x 42mm. Tapered polishing pad: 14-23mm x 42mm. For use with Pneumatic Detail Polisher - PowerTEC Part No. 92559.

Includes: flexible shaft, airline adaptor, lubricating oil bottle, 2 x wrenches; attachments: 2 x backing pads, 2 x felt mounted bullet type pads, 2 x wool polishing pads, 2 x buffing mop pads, 2 x lambswool polishing pads, 3 x tapered polishing pads, 3 x cylinder polishing pads, 8 x polish foam pads. Flexible shaft length: 134cm; simple twist on/off as well as regulating air flow & RPM speed. Fits standard 1/4 air hoses; max pressure: 90psi. Max no load speed: 70000rpm; max polish accessory speed: 15000rpm. All consumable contents available separately. Always wear safety goggles.

Contains 2 pads each of: Green (coarse), Yellow (medium), Blue (fine) & Red (extra fine). Size: 30mm (dia) x 15mm. Max RPM: 15000. For use with Pneumatic Detail Polisher - PowerTEC Part No. 92559.

Mop size: 50mm (dia). Max RPM: 15000. For use with Pneumatic Detail Polisher - PowerTEC Part No. 92559

Size: 25mm (dia). Max RPM: 15000. For use with Pneumatic Detail Polisher - PowerTEC Part No. 92559