Car Service Station Equipment Powertec

A practical repair system for repairing aluminium body outer skinExtremely high quality repairSuitable for all manufacturers and vehicles Patented new development in the aluminium welding technology makes it possible for the first time to weld aluminium bits with high process reliabilityUnique argon shield ensures strong weld and excellent repair resultsApproved and used by Tesla Cars

Aluminium Mig & Panel Repair System

Complete Aluminium repair station includes 200A Aluminium MIG welder and Aluminium repair welderMIG can be set up as Aluminium, steel or MIG brazeWelds on Aluminium washers, ( trolley available seperately 92231 )1mm Aluminium MIG wire available - Part No. 92514Revolutionary Aluminium pin puller

The most innovative system for the repair of plastic partsCompatible with almost every plastic type used in the automotive industryHas it's own nitrogen generator which eliminates the need for a gas bottleAllows the welding of filler material by heating with nitrogenThe welder comes complete with a set of plastic consumables including a scraper and roller to finalise the repair.Heats plastic without combustion and therefore without emitting fumes: 230v, 50Hz, 1600w, 20-650C Made in Italy

Compatible with almost every plastic type used in the automotive industryHas it's own nitrogen generator which eliminates the need for a gas bottleAllows the welding of filler material by heating with nitrogen. The welder comes complete with a set of plastic consumables including a scraper and roller to finalise the repair.Including integrated Hot Stapler, snap off staples, corner plastic, plastic smoother and gauge.Heats plastic without combustion and therefore without emitting fumes: 230v, 50Hz, 1600w, 20-650C Made in Italy

An induction heating system that speeds up and simplifies the removal of bonded components (such as windscreens, plastic trim pieces, bonded badges, stickers, etc) or stuck and seized metal parts (such as nuts, bolts, track rod ends, bearings and gears). By using electromagnetic induction it allows for the transfer of an intense quantity of heat locally, without causing damage to the surrounding area.3.5kw watercooled induction heater.Includes heating wand & glass remover block.Flameless heat for removing corroded nuts & bolts.Also removes trim, stripes, vinyl graphics & decals, together with underseal & windows etc.Suitable for bodyshops & workshops.

16A MS4 Welder combined with Alumax (Steel and Aluminium)Revolutionary Short Cycle Aluminium welder with simple single dial controlsFixes Miracle style washers and direct pull pins (Aluminium) Steel. Localised earthUses the integrated puller on Aluminium Welder to ease out dents using special Aluminium welding pins. Aluminium washers loops and pins are re-usable Prepares the dent for the appropriate Miracle tool to be used to lift out the dent

Ideal for use in workshops where there is limited space for regular 2 and 4 post vehicle lifts, the Mobi-Lift MKII is a fully portable and very capable vehicle lift, powerful enough to lift up to 1200kg and support light commercial vehicles, 4x4's, pick up's and almost any other vehicle weighing up to 2500kg. Lifting from either the wheel or the sill, the Mobi-Lift MKII quickly raises vehicles to a good working height, making the job easier and safer. Perfect for estimating, wheel changing, jet washing and paint spraying, the Mobi-Lift MKII from Power-Tec is a must have for any automotive workshop.

Airopower is an air operated push and pull body repair system.Easy and quick to operate with 5.25 tons of pushing and pulling power in one toolCompact for one man operationOil free to avoid risk of car interior damageRubber pads avoid paint damage2 metre remote control for safety

Digital MicroprocessorComes with Two Output CablesExcellent Weld PenetrationProvides Low Heat Build UpUse Easy Puller and Washer Welder at the same time (without changing cables)

Easy puller

Genuine Power-TEC 91743 Evo Miracle WelderSimple single dial controlProvides low heat build upExcellent weld penetration Allows pulling bits to support extreme pulling pressure without tearing or burn throughCan be tuned in to suit various metals used by vehicle manufacturer's

Stable base and high lift make it an ideal tool for both car and light commercial vehiclesThe door can be easily and precisely adjusted to the exact position for fixing to the pillarLifting capacity 60kgsMaximum door height 2200mmTrolley wheels

For the quick and safe transportation of SUV vehicles, pick ups and vans around the workshopWeight capacity 2400-3100kgComplete with 2 rubber pads and 3 support extensionsFitted with wheel brake. Size width Min. 1390mm - Max. 1500mmOptional extra sill clamps part no 91878

Ability to do 1500 welding points, with 100% charged battery. Battery charge time: approx 90 mins.Welding current values of 2500 amps.No consumption / absorption on the 16 Ampere power line.Colour LEDs for signaling the various operations. Lightweight: 2.9kg.Supplied in a case with the battery charger module. Extended 2 year warranty or 120,000 welds.

Air operated semi-automatic gun washing machine, fitted with an aluminium diaphragm pump, providing fully enclosed operation, with capacity for 2 pots & 2 guns. Max working air pressure: 90psi; operating pressure: 40 60psi; air consumption: 2 4 ft/min . Wash cycle: 40-60 seconds. Suitable for water or solvent based paint use (not both in the same cycle). Air inlet: 1/4" pt; liquid inlet/outlet: 3/8" pt. Dimensions: 465mm (w) x 645mm (d) x 1110mm (h). CE approved and ATEX approved.

Mini plastic welderCompact entry level plastic welder can be used with compressed air or NitrogenCompatible with almost every plastic type used in the automotive industryAllows the welding of filler material by controlling heatingMade in Italy exclusively for Power-Tec

A fast, easy to install pulling tower with a height adjustable mechanical hoist (extension pole available to raise height for commercial vehicles 92659). Ideal for use on steel and aluminium panel repair. Designed to reach a pulling traction force up to 550kg, it is counterbalanced by an anchoring plate / suction pad, which features a vulcanised rubber pad and is held onto the ground using the workshop air supply, allowing it to be used anywhere on the workshop floor without the need to drill in any anchor points or fixings. It is supplied with a claw hook for use with weld on squiggly wire, Miracle System bits, glue pads, weld-on tack & pull plates and various other applications.Portable pulling …

Part of the Power-TEC panel repair rangeSlide hammer and resistance welder combined in one unit.Lightweight. CE CertificatedSimply weld to the panel then use the internal slide hammer to pull the dent out. Replacement copper welding tip available - Part No 91001Twist 90 degrees to break weldEarth Electrode housed in the same unit.

Rough out damage on cosmetic panel repairing panel lines to their original shape.1600mm Frame and PullerRough out damage on cosmetic panelsRepair panel lines to their original shape Part of Miracle System Master Kit 92171Keep panel under tension during panishing and re-shaping

Headlight beam setter for cars, LCV and HGV vehicles. Quick and easy to use on all types of headlight including LED, Xenon and Halogen, and front fog lights. Suitable for both left and right hand drive vehicles.Ideal for bodyshops and garages after accident repair, front end strip down, headlight replacement and pre-MOT checks.Vertically adjustable light box with adjustable checking panel. Wheeled base to allow easy checking of both sides.High precision glass visor & digital light meter.Beam set height: 230 - 1460mm.Working floor area must be flat and level. Maximum deviation: less than 1mm/m for vehicle area & less than 0.5mm/m for the beam setter area for accurate measurement.

Height adjustable stand, enables the AiroPower system to be used as a pulling tower.For use with the Power-TEC AiroPower push & pull body repair system, please see Part No. 91511.Converts the AiroPower into a pulling tower.Anchor to Floor Pull Plate, Part No. 91108.Features 2 raised castors for manoeuvrability.Part of the AiroPower accessories range.

Designed to move accident damaged vehicles around the work area.Four heavy duty 200mm diameter wheels enable the vehicle to move in any direction1000kg capacityTwo wheels are brakedHeat resistant for spray booths/low bake ovensComplete with 2 pin fittings and axle supports

800mm Line Puller (Feet not Inc)