Submersible (Drainage) Pumps

The TDP 370 E is a 700 watt drilling pump at max. pressure. 3.7 bar, discharge height max. 40 meters and max. immersion. 20 m perfect for drafting clear water from deep water points with a minimum diameter. 125 mm. For watering gardens, vegetable gardens, flower beds and potted flowers, through automatic installation (sprinklers, sprinklers) or traditional watering can – water from a borehole, well or cistern saves on tap water for a multitude of tasks. A stainless steel filter strainer is integrated to filter any suspended particles, so the clear water can be used as cleaning water and/or for feeding certain household installations such as washing machines or toilets. This extremely compact pl…

UP Multi-stage submersible pump INSTALLATION AND USE The main feature of this newly designed range of submersible pumps is that impellers will not block even after long periods of inactivity, thanks to innovative patented technical solutions. As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of gardens and allotments and for pressure boosting TECHNICAL CHARACTERISTICS Independent floating impellers (patented) Double mechanical seals with oil chamber More compact in size (-20%) Reduced energy consumption

400W Puddle Pump with Auto sensor - This submersible pump is ideal for draining flooded cellars, sumps etc. This is the perfect solution for clearing shallow bodies of water such as spillages because of its ability to pump as low as 1mm from the floor. Note: Suitable for use with clean water only

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps small soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150 watt motor has overload protection. Built in handle. 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - auto will turn on at 251mm and off at 81mm and work in confined areas.

The Trencher Range of submersible 2" drainage pumps are compact, light and powerful and are suitable for ground water and water containing sand and silt. The built in agitator makes this pump ideal for removal of dirty water. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering

Ideal for heavy and continuous duty pumping on building sites, industrial processes, tunneling,mines and quarries . Pump water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from heavy duty cast iron, tough steel and ductile iron. Built in handle. 20m of heavy duty H07RNF cable. Supplied with two hose connectors: spigot and mBSP Both adjustable to two positions to avoid hose kinking.

The Tsurumi Pumps 50TM range of pumps are specifically designed for industrial use with dangerous chemicals and seawater. They are all built from titanium to culminate in a pump that is corrosion resistant, exceptional in size and weight and that has brilliant wear resistance too. Combined with the high-performance motor, this chemical and seawater pump will provide you with excellent durability, reliability and simple, effective results every time. The automatic version of this pump comes with a twin-ball float switch, for precise automatic operation, this is adjustable and features an integral transformer to give a safe low voltage of 24 volts at the float end. The floats have a rounded

Lowara SCUBA 107660230 SC209CG L27 0,9 kW / 1,2 HP / 1x220-240V 50Hz LOWARA SCUBA Close-coupled Submersible Electric Pumps for clean water in 5” wells Single-phase pump WITH float switch

The PTS is a heavy duty submersible chopper pump ideal for particularly heavy applications that require a preliminary chopping of the solid material suspended in the liquid being pumped. Each pump has a large, through passage, open multi-channel impeller and double cutting system in suction inlet.

This Heavy Duty Submersible Sewage Pump is suitable for draining waste & clean water or sewage containing solid bodies up to 31mm, whilst the float switch automatically turns the pump off when the water level drops.

The DG Blue Professional is a submersible pump is suitable for pumping water polluted with suspended solid particles. The cast iron vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 50mm. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Agriculture /farming Sewage and treatment works Civil construction

The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

The GE-DP 18/25 LL Li is an all-rounder for pumping out clean or dirty water, and due to its battery powered design it can be conveniently used in a wide variety of locations, whether or not there is a mains power source nearby. It is part of the Power X-Change cordless system and shares battery compatibility with a wide variety of additional tools for the home and garden. The pump is suitable for waste water with particles up to 25mm in size, or for clear water with particles up to 1mm. At 3.3kg, it is easy to transport and features an integrated carry handle. Features & Benefits • Member of the Power X-Change family (requires one 18v battery) • 2-in-1 combi pump: Clean water or

Lowara SCUBA 107660130 SC411C L27 1,1 kW / 1,5 HP / 1x220-240V 50Hz LOWARA SCUBA Close-coupled Submersible Electric Pumps for clean water in 5” wells Single-phase pump WITHOUT float switch

UP Multi-stage submersible pump INSTALLATION AND USE The main feature of this newly designed range of submersible pumps is that impellers will not block even after long periods of inactivity, thanks to innovative patented technical solutions. As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of gardens and allotments and for pressure boosting TECHNICAL CHARACTERISTICS Independent floating impellers (patented) Double mechanical seals with oil chamber More compact in size (-20%) Reduced energy consumption

With a stainless steel body and unique water cooling system the CPRP560 Residue Water Pump can be used for both clean and dirty water applications. This pump can shift water containing particles up to 7mm dia and features the ability to clear residue water down to 1mm making it ideal for removing water from floors, low level pools and puddles.

The Select Brand Arvex/S (230V) is ideal for the pumping of chemicals that are of a mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with seawater and saltwater and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316 grade

The PTS is a heavy duty submersible chopper pump ideal for particularly heavy applications that require a preliminary chopping of the solid material suspended in the liquid being pumped. Each pump has a large, through passage, open multi-channel impeller and double cutting system in suction inlet.

Ideal for heavy and continuous duty pumping on building sites, industrial processes, tunneling,mines and quarries . Pump water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from heavy duty cast iron, tough steel and ductile iron. Built in handle. 20m of heavy duty H07RNF cable. Supplied with two hose connectors: spigot and mBSP Both adjustable to two positions to avoid hose kinking.

UP Multi-stage submersible pump INSTALLATION AND USE The main feature of this newly designed range of submersible pumps is that impellers will not block even after long periods of inactivity, thanks to innovative patented technical solutions. As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of gardens and allotments and for pressure boosting TECHNICAL CHARACTERISTICS Independent floating impellers (patented) Double mechanical seals with oil chamber More compact in size (-20%) Reduced energy consumption