Submersible (Drainage) Pumps

Lowara SCUBA 107660160 SC407T L27 0,75 kW / 1,1 HP / 3x380-415V 50Hz LOWARA SCUBA Close-coupled Submersible Electric Pumps for clean water in 5” wells Three-phase pump WITHOUT float switch

VX-ST VORTEX Submersible pump in stainless steel for Filthy Water INSTALLATION AND USE The VX-ST submersible pumps in stainless steel are recommended for draining filthy water in domestic, civil and industrial applications, in every case where there are solid bodies in suspension, for example water mixed with mud, groundwater, surface water. They are suitable for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations FEATURES Liquid type: filthy water Uses: domestic, civil

The RC900 is a multistage submersible pump ideal for the transfer and pressurisation of clean water. The pump has a stainless steel construction and impeller with Noryl diffuser. Applications include: Boosting Domestic and industrial use Agriculture and farms Irrigation Water distribution Rainwater harvesting systems

The SAM 316-130/S submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316 grade cast and pressed stainless steel, it has a pendant type float switch for automatic level control. Fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. Supplied with 10 metres of heavy duty, rubber power cable. The 230v motor is fitted with internal overloads and internal starting capacitors. The chances of corrosion of 316 stainless steel increase with the effects of chloride concentrations, evaporation, temperature, aeration etc, (working individually or together).This model covers most, but not all global seawater conditions.

The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic which is resistant to corrosion. It features a vortex impeller giving 30mm solids handling. The maximum submersion depth for this pump is 10m and the minimum sump size is 250mm x 250mm. Applications include: Small water features Cellars and basements Domestic and industrial use Final effluent Nuisance water Marine application

The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering

750W Submersible Pump with integrated float switch. This submersible pump is ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. It can be used to remove both clean and dirty water including particles up to 35mm dia. The integrated float switch will switch off the pump motor once the water level is reduced to a defined level. Being integrated within the pump housing it is usable in a more confined space than would be the case with conventional float switches Note: Suitable for use with clean or dirty water

Usage: This 2.0CN twin impeller shower pump is designed to help boost your water pressure of both your hot and cold water supply to a single shower, bath, shower mixer or mixer tap. Compatibility: When you want to install a shower pump which is situated level or slightly above the cold water tank, then you need a negative head pump. It sucks water from the tank that feeds straight to your shower. Installation: Grundfos shower pumps are easy to install. Everything that you will need for installation is included for you. Motor: Continuously rated shower pumps effectively run until the user turns it off. This is ideal when the shower needs to be used frequently. Guarantee: This product comes …

Effective - high pump volume and powerful 550 W motor Robust - made of corrosion-resistant stainless steel Automatic – float switch regulates operation depending on the water level Universal - different hose connection sizes: 1 inch, G1 inch, 1 1/4 inch, G1 1/4 inch Versatile - suitable for pumping and pumping out ponds, fountains, pools and flooded cellars

Designed particularly for heavy duty applications, this robust, powerful water pump is ideal for rapidly shifting both clean and dirty water; in fact, it will move solid water borne objects up to 30mm in diameter! Therefore it's ideal for draining pits, sumps, ditches and footings etc. It's made from tough, durable corrosion proof materials and has a really reliable & low power consumption 230V motor for cost effective long term use. It's also fitted with a float switch for automatic water level control and an anti-airlock valve too.

The Arvex/S (400V) is ideal for the pumping of chemicals that are of mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with sea and salt water and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316-grade (1.4401) pressed

The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic which is resistant to corrosion. It features a vortex impeller giving 30mm solids handling. The maximum submersion depth for this pump is 10m and the minimum sump size is 250mm x 250mm. Applications include: Small water features Cellars and basements Domestic and industrial use Final effluent Nuisance water Marine application

Ideal for heavy and continuous duty pumping on building sites, industrial processes, tunneling,mines and quarries . Pump water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from heavy duty cast aluminium (for improved portability) tough steel, ductile iron and rubber. Built in handle. 20m of heavy duty H07RNF cable (10m on 0.75kW). Supplied with two hose connectors: spigot and mBSP Both adjustable to two positions to avoid hose kinking.

TRITUS Submersible GRINDER pump for sewage water INSTALLATION AND USE The grinder pump of the TRITUS series, made of remarkably thick cast iron, exceptionally robust, abrasion-resistant and long lasting, is equipped with highly resistant and tempered stainless steel GRINDER. This allows for the total shredding of solids and fibers contained in wastewater and sewage in domestic and civil sectors, for the conveyance under pressure into the sewer system through small diameter pipes. Submersible grinder pump highly efficient. TECHNICAL CHARACTERISTICS Superior cutting system provides improved shredding performance over radial cutters. Entire cutting system made of hardened, highly resistant

VXC 35/45 VORTEX Submersible pump for sewage water INSTALLATION AND USE VXC series pumps, made from heavy gauge cast iron offering exceptional sturdiness and abrasion resistance, come equipped with a VORTEX impeller and are therefore suitable for draining waste water containing suspended solids, sewage and water mixed with mud. TECHNICAL CHARACTERISTICS New version of the VXC series, totally redesigned, made more reliable with the introduction of double mechanical seals and Epoxy Electrocoating Treatment of all cast iron parts. This treatment guarantees high resistance to oxidation. Double mechanical seals All cast iron parts subjected to Epoxy Electrocoating Treatment Stainless steel

This domestic submersible pump is ideal for clearing flooded cellars, trenches, flat roofs, swimming pools etc. and is very popular for creating fountains, waterfalls and ornamental ponds.

Clarkes powerful and rugged industrial quality submersible pump has a stainless steel drive shaft and chrome plated body, plus a 50mm (2") diameter outlet.

The PTS is a heavy duty submersible chopper pump ideal for particularly heavy applications that require a preliminary chopping of the solid material suspended in the liquid being pumped. Each pump has a large, through passage, open multi-channel impeller and double cutting system in suction inlet.

The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic which is resistant to corrosion. It features a vortex impeller giving 30mm solids handling. The maximum submersion depth for this pump is 10m and the minimum sump size is 250mm x 250mm. Applications include: Small water features Cellars and basements Domestic and industrial use Final effluent Nuisance water Marine application

Ideal for heavy and continuous duty pumping on building sites, ditches, footings, processes etc. Used extensively in tool hire. Pumps water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from tough steel and rubber. Built in handle. 10m of heavy duty H07RNF cable. Hose connector adjustable to two positions to avoid hose kinking. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running.

Ebara Right/A 75 Brand Evacuation Submersible Electropump Ebara Reference: 1771030004A Japanese Technology Ebara Pumps Iberia, S.A., manufacturer of Centrifugal Pumps, Water Pressurization and Fire Protection Groups, belonging to the Japanese Industrial Corporation Ebara Co. , a world leader in the manufacture of machinery and systems for fluid handling.