Submersible (Drainage) Pumps

Ideal for heavy and continuous duty pumping on building sites, ditches, footings, processes etc. Used extensively in tool hire. Pumps water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from tough steel and rubber. Built in handle. 10m of heavy duty H07RNF cable. Hose connector adjustable to two positions to avoid hose kinking.

Ideal for heavy and continuous duty pumping on building sites, ditches, footings, processes etc. Used extensively in tool hire. Pumps water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from tough steel and rubber. Built in handle. 10m of heavy duty H07RNF cable. Hose connector adjustable to two positions to avoid hose kinking.

MC-45 DOUBLE-CHANNEL Submersible pump for sewage water INSTALLATION AND USE MC submersible pumps are suitable for draining dirty water and sewage in domestic and civil applications. They come equipped with a DOUBLE-CHANNEL stainless steel impeller and are capable of pumping liquids containing short fibred suspended solids up to 50 mm. They are ideal for pumping sewage water, waste water, surface water and water mixed with mud in locations such as holiday homes and detached homes. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. TECHNICAL CHARACTERISTICS New version of the MC series, totally

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable. Selectable manual or auto mode - auto will turn on at 607mm and off at 115mm with some adjustment to turn on lower.

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable.

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable.

The DR Blue Pro is a submersible drainage pump with an open, multi-channel impeller for most soiled water applications. Applications Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Civil construction

The DR Blue Pro is a submersible drainage pump with an open, multi-channel impeller for most soiled water applications. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Civil construction

Lowara SCUBA 107660130 SC411C L27 1,1 kW / 1,5 HP / 1x220-240V 50Hz LOWARA SCUBA Close-coupled Submersible Electric Pumps for clean water in 5” wells Single-phase pump WITHOUT float switch

The RC900 is a mulistage sumbersible pump ideal for the transfer and pressurisation of clean water. The pump has a stainless steel construction and impeller with Noryl diffuser. Applications include: • Boosting • Domestic and industrial use • Agriculture and farms • Irrigation • Water distribution • Rainwater harvesting systems

The 50PNI2 is a light and compact automatic pump with an energy efficient motor and integral anti-airlock valves. It feature a dual control float-switch which enables manual and automatic operation. This switch is also adjustable to enable individual setting of on and off levels. The float is bell shaped and small, which make these pumps suited to applications where a sump is narrow, that require precise level control or where a traditional pendant type float’s operation could be fouled. Liquid paraffin is used for the lubrication oil, which enables use in food processing and aquaculture. They are not recommended for ponds or water features.

UP Multi-stage submersible pump INSTALLATION AND USE The main feature of this newly designed range of submersible pumps is that impellers will not block even after long periods of inactivity, thanks to innovative patented technical solutions. As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of gardens and allotments and for pressure boosting TECHNICAL CHARACTERISTICS Independent floating impellers (patented) Double mechanical seals with oil chamber More compact in size (-20%) Reduced energy consumption

Lowara SCUBA 107660180 SC411T L27 1,1 kW / 1,5 HP / 3x380-415V 50Hz LOWARA SCUBA Close-coupled Submersible Electric Pumps for clean water in 5” wells Three-phase pump WITHOUT float switch

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

UP Multi-stage submersible pump INSTALLATION AND USE The main feature of this newly designed range of submersible pumps is that impellers will not block even after long periods of inactivity, thanks to innovative patented technical solutions. As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of gardens and allotments and for pressure boosting TECHNICAL CHARACTERISTICS Independent floating impellers (patented) Double mechanical seals with oil chamber More compact in size (-20%) Reduced energy consumption

UP Multi-stage submersible pump INSTALLATION AND USE The main feature of this newly designed range of submersible pumps is that impellers will not block even after long periods of inactivity, thanks to innovative patented technical solutions. As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of gardens and allotments and for pressure boosting TECHNICAL CHARACTERISTICS Independent floating impellers (patented) Double mechanical seals with oil chamber More compact in size (-20%) Reduced energy consumption

Flow rate up to 80 l/min (4.8 m3/h). Prevalance up to 81 m. 1.1 kW (1.5 HP).

Flow rate up to 120 l/min (7.2 m³/h). Head up to 67 m. Motor 1.1 Kw (1.5 HP).