Amplifiers

Channel Strip / 19 Inch Size / Processor Type Equalizer / Number of Channels 2 / Rack Height 2 RU

1-channel, 2-band tube equalizer with 20Hz - 50kHz, +/- 1 db frequency range. Input Impedance: 600 Ohm. Low Frequency Boost: 20, 30, 60, 100, 200, 400, and 800 Hz at a maximum of +12 dB, the low frequ more→ency cut 20, 30, 60, 100, 200, 400, and 800 Hz at -18 dB maximum, high frequency Boost: 3, 4, 5, 8, 10, 12, and 16 kHz at a maximum of + 18dB, high frequency cut: 3, 4, 5, 10, and 20 kHz -14 dB maximum. 2U, 19" rackmount chassis.
Rackmountable: Yes
UK/EU Power supply included: Yes
Type: Boost;Equalizer
Made in: China
Power Supply: 240V

10 channel audio splitter for press conferences and other applications. On a transformer split basis, one line input is split out to ten outputs. All inputs and outputs are balanced transformer isolat more→ed. Line input and outputs. Adjustable input gain (-8 to +25dB). Level meter. Headphone output to monitor the input level, headphone volume adjustable. Individual ground lift. switches for each output. Ground Lift switch for the input. Expandable setup thanks to the Bus In/Out sockets. Dimensions: 480 x 165 x 44.5 mm (19" x 1 U). Weight: 4.18 kg. In a black finish.
Power Supply: 240V
Type: Isolator;Splitter
UK/EU Power supply included: Yes
Made in: Germany

Phantom power adapter that runs on AA batteries and provides powering for electret condenser microphones when phantom power is not available. It features an on/off switch and a bass roll-off filter. C more→onnectors are standard XLR-m to mini XLR-m. It can be used with various Audix microphones, including the ADX20iP, ADX40, ADX60, f90, MicroD, or MicroHP models.
Made in: China

PLX2000 power amplifier, 2 x 700W @ 4 Ohms19" rackmount 2U power amplifiers with dual fan cooling and class H architecture for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sock more→ets, speaker outputs on 2 SPK connectors or 4mm binding posts. High power output stable down to 2 Ohms load per side can also be bridged mono to 4 Ohms. Switchable ground lift, bridge mode and clip limiter.Bridge mode for high power mono operationOutput stable down to 2 OhmsRemovable handles for low profile installSwitchable clip limiterPower rms @ 2 Ohms - 2 x 1000WPower rms @ 4 Ohms - 2 x 700WPower rms @ 8 Ohms - 2 x 400WPower rms bridge @ 4 Ohms - 1700WPower rms bridge @ 8 Ohms - 1250WWeight …

Focusrite Scarlett OctoPre is an 8-channel microphone preamplifier and AD / DA converter with ADAT digital interface. The second generation of microphone preamps operates at 24 bit / 192 kHz and offer more→s a dynamic range of up to 109 dB. Two analog inputs located on the front panel are capable of handling microphone, line or direct instrument (Hi-Z) signals. OctoPre is the ideal studio accessory for extending the connectivity of Scarlett Sound Cards and other ADAT-enabled devices. The converter is designed for rack installation, where it occupies one height unit.

The Scarlett OctoPre features eight analogue inputs with combined XLR / TRS connectors. Each input channel has a volume control and …

PA−120Z is a high−performance selectable Hi−Z (70V/100V) or Lo−Z (4Ω/8Ω) power amplifier featuring balanced and unbalanced inputs and additional line−level ou more→tput. This versatile amplifier features built−in DSP auto−standby and maximum durability. PA−120Z is suitable for a vast range of AV installations.

• High–performance Amplifier — With built–in DSP and additional balanced stereo line–level output. PA–120Z features flat frequency response unmatched sonic performance excellent signal to noise ratio and extraordinarily low distortion levels.

• Adaptable to Any AV Installation — Switch …

The Cyrus Classic Power Amplifier is a notable addition to the Classic range offering a significant improvement in performance while maintaining the signature design of the series. Built with expertis more→e gained from the development of the renowned XR Series this power amplifier showcases a completely re-designed circuit topology and upgraded internal components.The Classic Power boasts a high-capacity power supply including a massive 408VA toroidal power transformer that efficiently delivers power to the amplifier. With power output ratings per channel of 144W into four ohm 110W into six ohm and 87W into eight ohm the Classic Power showcases its capability to handle various speaker setups. Whether …