Amplifiers

Fully balanced structure,Pure sound quality The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound outpu more→t. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 I/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4 Q load, THD+N

The Topping PA5 MKII Plus is a first-rate compact power amplifier building on the superb quality of the PA5 MKII but with enhanced power capacity. It provides up to 140W at four ohms and 85W at eight more→ohms per channel. Built with a fully balanced structure and an efficient Class D amplifier circuit the PA5 MKII Plus eliminates unwanted hum and noise to magnify any stereo speakers. With distortion levels measured as low as 0.0003 per cent (eight ohms at five watts) a frequency response of 20Hz - 40kHz and a 124dB dynamic range the PA5 MKII Plus effortlessly produces crystal-clear audio for an excellent listening experience. This power amplifier boasts RCA and TRS inputs enabling easy connectivity …

The Topping PA5 MKII Plus is a first-rate compact power amplifier building on the superb quality of the PA5 MKII but with enhanced power capacity. It provides up to 140W at four ohms and 85W at eight more→ohms per channel. Built with a fully balanced structure and an efficient Class D amplifier circuit the PA5 MKII Plus eliminates unwanted hum and noise to magnify any stereo speakers. With distortion levels measured as low as 0.0003 per cent (eight ohms at five watts) a frequency response of 20Hz - 40kHz and a 124dB dynamic range the PA5 MKII Plus effortlessly produces crystal-clear audio for an excellent listening experience. This power amplifier boasts RCA and TRS inputs enabling easy connectivity …

Class D amplifier providing 150 watts/channel (RMS) into 8 ohm loads or 225 watts/channel into 4-Ohm loads Bridgeable output provides 450 watts into a single 8-ohm Load 4-Pole detachable speaker scr more→ew connector (Phoenix connector) with support for up to 12 AWG speaker wire Built-in thermal and short circuit protection circuits Includes rackmount ears

Power Amplifier / Total Connected Load 700 W / Number of Channels 1

SA-series Secure Wall Amplifier 100V with UHF Mic + Media PlayerPublic address mixer-amplifier built into a surface-mount secure box. A powerful output can drive either 100V line or low impedance spea more→kers from binding post terminals inside the cabinet. The system includes a handheld UHF microphone with an inbuilt receiver and 2 switchable wired mic/line inputs are provided on combo XLR/jack sockets. Each mic input has switchable +48V phantom power and priority override, whch mutes the Aux inputs during voice operation. An internal media player enables playback of audio tracks from USB/SD player, FM tuner or Bluetooth pairing. Alternatively, line inputs can be connected to the Aux 1 RCA sockets …

TOA A-2240DD audio amplifier 1.0 channels Performance/stage Black

RM244V Mixer-amp with 4-zone paging240W mixer-amplifier with 3 mic/line inputs, 1 aux input and a built-in media player. Connections for mic/line inputs are jack or XLR and channel 1 input has a varia more→ble mute for priority override. 24V contacts can be connected to a fire alarm panel for emergency evacuation if required. The media section can provide playback from Bluetooth, USB/SD media or an FM tuner. Output terminals are provided for 4 zones which share the output of the 240W amplifier, governed by 4 individual rotary volume switches on the front panel. RJ45 inputs on the rear panel allow connection for up to two CS4 call stations to enable paging to individual or all zones. The RM244V offers …

2-zone Mixer-amplifier + USB/SD/FM/BluetoothMixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/line and 2 line inputs with an integral USB/SD/FM player more→and Bluetooth receiver can be enabled independently to either of the 2 zones. Mic 1 channel has a variable override and switchable phantom power for use with condenser microphones. Designed for installations where independent paging and audio to 2 separate zones is needed.DetailsPower supply 110-230Vac, 50/60Hz (IEC)Power : output 2 x 120W rmsAudio source USB/SD/FM/BT audio playerInputs 1 x mic (XLR), 2 x mic/line (jack), 2 x line (twin RCA)Zone outputs: line 2 x RCAZone outputs: speaker 2 …

RM4460 Zoning 100V Mixer-Amp 4 x 60W A 1U 19" rack-mountable quad amplifier with 4 independant input channels and 4 independent speaker outputs. Each output can deliver up to 60W of power to either more→low impedance (4 or 8 ohm) or 100V speakers by connecting either the upper or lower screw terminals on the rear panel. An internal media player can play audio files from a USB pen drive, tune to FM radio stations or connect via Bluetooth for wireless playback. A paging mic input has switchable Vox function to override other channels. 2 further balanced inputs can be selected to accept mic or line level input with switchable phantom power. Channels 1 to 3 also each have Bass and Treble controls …