Amplifiers

10 channel audio splitter for press conferences and other applications. On a transformer split basis, one line input is split out to ten outputs. All inputs and outputs are balanced transformer isolat more→ed. Line input and outputs. Adjustable input gain (-8 to +25dB). Level meter. Headphone output to monitor the input level, headphone volume adjustable. Individual ground lift. switches for each output. Ground Lift switch for the input. Expandable setup thanks to the Bus In/Out sockets. Dimensions: 480 x 165 x 44.5 mm (19" x 1 U). Weight: 4.18 kg. In a black finish.
UK/EU Power supply included: Yes
Type: Isolator;Splitter
Power Supply: 240V
Made in: Germany

DI Box / Desktop / Number of Channels 2

Dual-channel phantom power supply for microphones. The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a ru more→gged, compact, and portable unit. Innovative low power circuitry generates the higher voltage necessary for powering microphones while maximizing battery life. Features 2 XLR inputs and 2 XLR outputs, and 7,5 - 12 V AC/DC input. Can be powered with an external power supply or 9 V battery. Dimensions: 48 x 117 x 99 mm. Weight: 0,37 kg.
Made in: China

DI Box / Desktop / Number of Channels 1

Joe Bonamassa Signature Model Guitar Speaker Simulator DI. The PDI 03 JB Speaker Simulator is a professional passive DI box for guitar amps. Providing a frequency compensated, transformer balanced dir more→ect feed to mixing consoles or soundcards it connects between the amplifier output and loudspeaker or equivalent dummy load. The PDI 03 JB has been developed for live, studio and home recording applications to eliminate the need for time consuming mic placement and mic-related problems. Designed to Joe Bonamassa's high standards for a huge but tightly focused tone the exclusive JB switch brings the output signal to the fore and takes it "right in your face." The PDI 03 JB's dual speaker simulation …

Passive 8-channels 19" DI Box. Through the special MERGE LINK/IN function, the front LINK output can be used as a second input.The signal is then mono merged with the one from the INPUT jack through t more→o the output. Thus, the PAN16 offers a maximum of 16 inputs. Two PAD buttons enable an attenuation of 10, 20 or 30 dB. The XLR outputs are electrically isolated and balanced via transformer. 8 additional LINK-sockets are also available on the rear panel of the device. Dimensions: 480 (19") x 200 x 45 mm (1 U), Weight 2,39 kg
Rackmountable: Yes
UK/EU Power supply included: No
Type: DI Box
Made in: Germany

Active 2-channel DI Box. The Palmer PAN04A 2-channel DI box allows you to feed the unbalanced hi-Z signals of electric instruments to the microphone inputs of a mixer. It delivers a transformer balanc more→ed lo-Z signal at the outputs and helps eliminate hum and interference caused by ground loops. The active circuitry preserves frequency response and provides increased dynamics. The unit also features a 1/4" direct out and switchable -30 dB pad on each channel. An additional balanced XLR output merges both input signals to mono, e.g. for summing the L and R channels of a stereo instrument. With its tough construction, the PAN04A is equally suitable for stage and studio use. It operates on any standard …

DI Box / Desktop / Number of Channels 2 / Rack Height 1 RU

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance more→( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Type: DI Box
Battery Operation: Yes
Made in: Germany
UK/EU Power supply included: No
Power Supply: 48V Phantom

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Channels:1, Inputs: 1, Inpu more→t connectors: 6.3 mm Jack, Max. input level: + 54 dBu. Input impedance:
Type: DI Box
Made in: Germany
UK/EU Power supply included: No

P44800 amp 2 x 400W + 800W sub

2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective more→and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.
Mono summed sub output (can be full range)
Active crossover with variable frequency
Stereo full range output
Power rms @ 8 Ohms - 250 + 250 + 500W (sub)
Power rms @ 4 Ohms - 400 + 400 + 800W (sub)
Weight - 21kg
Fuse rating - F12A

Microphone preamplifier for connecting up to 2 microphones to one line input of a hi-fi system, an amplifier or a mixer. Stereo or 2 x mono, Wide frequency range, Black metal case, Supplied with plug- more→in PSU.
Battery Operation: No
Made in: Taiwan
UK/EU Power supply included: No
Power Supply: Adapter

Microphone Pre-Amp / Desktop / Number of Channels 1

High-quality microphone and line preamp mixer. It has the size of a floor pedal, and is suitable for singers, guitarists and bassists. It serves as a preamp, effects loop, and DI pedal. It is the idea more→l choice to achieve high quality vocals in live performance. It can easy integrate studio effects in to the vocal lines. It has an optional mixing control with three types of outputs and effects loop switch that can serve as on/off or momentary function selector. It can mix external audio sources with AUX connection. It connects via inputs and outputs 1 x 1/8", 1 x 1/4" and 1 x XLR. It is powered by an included 9VDC source. Dimensions: 91 x 67 x 38 mm. Weight: 0.43 kg.
Made in: China

DI Box

Digital-to-Analogue Converter

DI Box / Desktop / Number of Channels 2

From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfull more→y get to your audience the way that you hear it on stage. Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with Built-Like-A-Tank™ construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes. With four models to choose fr…

From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfull more→y get to your audience the way that you hear it on stage. Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with Built-Like-A-Tank™ construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes. With four models to choose fr…

Hybrid tube stereo Hifi amplifier with built-in USB MP3 player and Bluetooth module. It also contains a 2 line stereo inputs. Electron tubes produce clearer and warmer sound than modern transistors. I more→ncludes bass, treble (+/- 10dB) corrections, overall volume and input switch: CD, Bluetooth / USB, DVD.
Input impedance: 47kOhm
Input sensitivity: 300mV
Signal to noise ratio:> 80 dB
Harmonic distortion:

Acoustic guitar preamp/DI with saturation and compression EQ. Analog saturation: Often used by studio engineers in post-production, saturation adds warmth, dimension, and pleasing harmonics while smoo more→thing the signal for an enhanced mix. The Session DI’s proprietary saturation is voiced specifically for the acoustic guitar and transports studio analog warmth and inspiring playability to the stage. Compression EQ: Unlike standard compression that can squash the entire range of your signal, the Session DI’s Comp EQ features 3 narrowly focused bands of compression that tame common problematic frequencies and uncover the voice of your guitar. The low, mid, and high frequency compressors are esse…