Amplifiers

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Type: DI Box
Battery Operation: Yes
UK/EU Power supply included: No
Made in: Germany
Power Supply: 48V Phantom

Professional active direct box that allows connection of an instrument, line or speaker level signals to a mixer or other balanced input. It features high-impedance single-ended 1/4” and XLR inputs that are buffered and converted by very low-noise active electronics into an isolated balanced low-impedance signal source. It has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output – therefore it delivers a very clean, neutral sound with a wide variety of signal sources and over long signal runs even in high noise environments. Direct box features Input Attenuator switches that allow for a wide range of s…

The Radial StageBug SB-4 is a compact active direct box that has been optimized for use with piezo transducers. This enables violin, dobro, mandolin, cello, upright bass and other instruments that are best amplified using a piezo to be connected without compromising the tone or frequency response. The design begins with a 1/4 "" input for the instrument pickup. Unlike typical direct boxes that have a 1meg-ohm input impedance, the SB-4 features a very high 5meg-ohm impedance that smoothes out troublesome peaks that give piezos a bad name. The higher impedance also broadens the frequency response for a more natural and pleasing sound. The active circuit performs the high-to-low impedance conversion …

The Monitor Audio IA125-4 is a compact and versatile four-channel custom installation amplifier. It can be configured to deliver four channels at 125W and two channels at 250W. In power-sharing mode it can even support Monitor Audios THX Ultra-certified Cinergy 100 speakers for a large system. This is a great amplifier for two-zone stereo applications as well as height channels within your home theatre system. This is all packed into a rugged 1U half-size space-saving design - perfect for any setup you have.

All-tube 10W guitar combo amplifier from AC10 Custom series that is a reproduction of the original AC10, one of the first amplifiers to bear the VOX name that has long been adored for his ability to achieve rich, articulate tube tone at very manageable volumes. More portable than the AC15 and more powerful than the AC4, the combo features the classic Top Boost tone circuit that provides an array of classic and modern tones. Now equipped with reverb and a master volume, it is the perfect companion for the home, studio or stage. The Top Boost tone can be further adjusted via Gain, Bass, Treble, Reverb and Volume controls. The combo is equipped with two 12AX7 and one EL84 tube, and a 10” Celestion VX…

Talk button and volume control, speaker connection 4-16 Ohm
Integrated amplifier 10 WRMS
Mains operation
Power supply: 230 V/50 hertz/12 VA
Measures 167 mm length by 65 mm width by 130 mm height

StudioPhono replicates the wide bandwidth transparency Mobile Fidelity Sound Lab mastering engineers demand. Tim De Paravicini the designer responsible for the Mobile Fidelity Gain2 Ultra Analog cutting system assisted with the internal circuitry to ensure your analog system at home faithfully reproduces the music buried in the grooves of your LPs.

DI Box / Desktop / Number of Channels 1

Project Accu Box S2 high end power supply for Box Design, including Phono Boxes
Li-Ion battery driven, eliminating mains power interferences
Real ground reference for turntables kills any possible hum
One 18V and one 5V USB-A outputs for DACs
Full aluminium casework in black or silver