Amplifiers

Stereo headphone amplifier. 4 separate headphone amplifiers in one housing. 1 level control each per amplifier. 6.3 mm stereo input. 6.3 mm stereo outputs. Frequency range: 20 - 20000 Hz. Input signal: 300 mV. Output signal: 2 x 16 mW/8 Ohm, 2 x 35 mW/32 Ohm, 2 x 15 mW/600 Ohm (per headphone). S/N ratio: 64 dB. THD: 0,1 %. Power supply: via encl. plug-in power supply. Dimensions: 117 x 93 x 40 mm. Weight: 560 g. Colour: Black
Impedance: 32 Ohm
Number of Channels: 4
Outputs: Headphone Jack 6,3mm
Colour: Black
Headphone Output: Yes
Power Supply: Adapter
UK/EU Power supply included: Yes
Battery Operation: No
Frequency Range: 20 Hz - 20 kHz
USB: No
Inputs: Jack TRS 6,3mm
Made in: China…

IWA In-Wall Amplifiers with BluetoothStereo amplifier units for background music and public address in a minimalist housing for installation into cavity walls and ceilings. Class-D amplifier design operates cleanly and efficiently with minimal heat dissipation, combined with an internal digital switch-mode power section, which enables easy connection directly from the local mains supply. Bluetooth compatibility enables wireless streaming of audio files from a smart phone or other enabled device in addition to 3.5mm Aux input and an optical digital audio input, ideal for integrating into A-V systems. For discreet and trouble-free installation without any need for table-top or cabinet installation,…

Microphone Pre-Amp / Desktop

Phantom power adapter that runs on AA batteries and provides powering for electret condenser microphones when phantom power is not available. It features an on/off switch and a bass rolloff filter. Connectors are standard XLRm to mini XLRm. It can be used with various Audix microphones, including the ADX20iP, ADX40, ADX60, f90, MicroD, or MicroHP models.
Made in: China

PERFORMANCE - Greatly improves headphone sound from any device with a USB output.
VERSATILITY - Connects easily to USB-C ports. (Adapter for USB-A ports also included)
FEATURES - ES9219 Sabre DAC chip with Quad DAC+ technology, 32-bitHyperStream III DAC architecture and Time Domain Jitter Eliminator. Also supports Supports hi-res audio up to 32-bit/384kHz PCM, DSD256 and MQA.
HIGH QUALITY - Gold-plated 3.5mm headphone socket, silver-plated copper conductors, twisted for high signal purity.
CONNECTIONS - USB-C Input to 3.5mm Headphone Jack.
INCLUDES, 1 x GO link, 1 x Quick Start Guide, 1 x USB-A to USB-C adapter, 1 x USB-C Charging Adapter 1 x Instruction Card…

Microphone Pre-Amp / Desktop

Balanced Line Output Switch. Palmer PEABO is a Balanced Line Output Switch with two inputs and one output. Thus, it is the perfect choice for routing a signal to either one of two possible inputs. Switch your vocal mic between the FOH and monitor mixing desk to communicate with the monitor mixer or the band on stage. Two different sound configurations: to switch between different effects or sounds on your microphone, e.g. a "telephone effect" or more levels of reverb. Run the outputs of the PEABO into two channels of the mixing desk, that you can configure differently. Now you can freely toggle between them on-stage at any time. You can also use the PEABO to route the signal to two rooms or …

Dual reamping direct box. The DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 6,35 mm and XLR inputs are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments. Frequency response: 10 Hz - 100 kHz. Dimensions: 47 x 117 x 99 mm. Weight: 0,38 …

WA-215 Wall Mount Amplifier + Media Player with BluetoothCompact audio controller with 2 x 15W digital amplifier built into a single gang wall plate. Powered directly from 100-240Vac mains supply, the unit can be installed into a partition wall or 47mm back box and provides a minimal yet fully functional control surface. The WA-215 has an inbuilt USB/MicroSD audio player, an FM tuner and Bluetooth receiver. Key functions are operated from the front touch panel or by using the supplied IR remote control. Connections for 2 speakers, mains power, FM antenna and an external line input are provided at the rear on screw terminal Euroblock connectors. Trigger contacts are also included for media playback …

dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and groundloop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output …

From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage. Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with Built-Like-A-Tank™ construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes. With four models to choose fr…