Amplifiers S.M.S.L

Volume Control & BTL: SMSL amplifier uses the Japanese NJRC company's NJW1194 electronic volume control chip. This precision chip delivers accurate volume control and ultra-low distortion, ensuring pure, unaltered sound quality. It is a powerhouse amplifier that utilizes the latest BTL (Bridge-Tied Load) technology, ensuring top-notch quality, exceptional efficiency, and minimal energy consumption. SMSL A300 Amplifier: The Audio amp uses German Infineon's new digital high-power amplifier chip MA5332MS has high efficiency and low energy consumption. The stereo mono amplified mode has a powerful output power rating of up to 165W in a 4Ω load. Even with a high impedance load of 8Ω, the A300 pr…

High output power and high-end preamp design: output power up to 15W at 16Ω and 7.5W at 32Ω, preamp output function can be used as a hi-end preamp. High, medium and low gain switchable: unbalanced interface: low -11.8 dB, medium 0 dB,high 14.4 dB. balanced interface: low -5.8 dB,medium 6 dB,high 20.4 dB. Fully symmetrical design with discrete components, ultra-high output, use electronic relays for volume control, eliminating channel deviation, built-in highly efficient and low noise power supply system. Beautiful shiny quality aluminium housing, fully laminated colour lPS display with tempered glass, equipped with full function remote control, good hand feeling, better quality, support fu…

【A Flagship AKM's Chipest】: SMSL D400EX decoder features AKM's new D/A conversion solution, distortion as low as a staggering 0.00006%, taps all the potential of the chip. to deliver the "as if you were there" sound. Two AK4499EX DAC chips combined with an AK4191 DAC chip, these chips are very powerful and ensure very musical sound reproduction for vivid and immersive listening. 【New 3rd-Generation XMOS XU-316 USB DAC Processor】: SMSL DAC has featured an New 3rd-Generation XU316 USB processor from XMOS Technologies. This high-performance microcontroller allows fast and efficient processing of audio streams over USB. It can decode high-resolution 32-Bit/768kHz PCM signals and native DSD512 a…

The SMSL D400ES adopts the new generation flagship DAC chip ES9039MSPRO of the American ESS, with built-in MQA hard decoding. Support MQA-CD. The new third-generation XMOS XU-316, the PCM supports 32bit/768kHz, and the DSD supports DSD512. The eight channel parallel circuit design is adopted, and the distortion is as low as 0.00005% (- 125dB), which is more stable. 11 high-end dual op amps and a large number of fever components are used. 2nd PLL is adopted to eliminate the JITTER during SPDIF transmission. The new independently developed CK-03 clock processing circuit greatly reduces clock jitter. Support DOP independent display function, and accurately judge the current decoding format. USB,…

【The D-class amplifier chip】 adopts the MA5332MS stereo D-class amplifier chip, and the multi chip module provides the same or even higher output power as the single chip replacement, without the need for a heat sink, reducing the space occupied by 50%. Equipped with overcurrent, over temperature and under voltage protection. We have used the electronic volume control chip NJW1194 from JRC Corporation in Japan for precise volume control and ultra-low distortion. 【MQA-CD full decoding】will fully unfold MQA music files to provide high-quality sound sources. At this playback level, you will fully hear the content created by the artist in the studio. Only the CD file size allows for high-quality music at…

【Dual ES9039Q2M DAC Chips】SMSL DO100Pro incorporates dual ES9039Q2M decoding chips along ,distortion as low as: 0.00005% .Support 8x expansion and MQA-CD playback.Whether you're listening to your favorite music, watching a movie,play games,it guarantees an immersive and captivating audio experience. 【New Third-Generation XMOS XU316 Processor】USB dac uses the new third-generation XMOS XU-316 high-performance guarantee, combined .PCM 32-bit 768kHz and native DSD up to DSD512 flow. This DAC ensures that you can immerse yourself in the world of sound with unmatched clarity and detail. 【Gaming DAC 】MSL DAC features both USB1.1 driver-free mode and USB2.0. The driver-free USB1.1 mode

SMSL A200 uses 2 pieces of Infineon's new Silicon Carbide digital power amplifier chips, which provide higher quality and up to 92% efficiency, further reducing energy consumption. Support Bluetooth, optical, coaxial, HDMI audio, USB, line input. new Bluetooth 5.0 technology, both low power consumption and high sound quality. Support HDMI (ARC) audio return function, used to connect to the HDMI interface of the TV, to achieve the output of the TV audio. electronic volume control, eliminating the potentiometer volume adjustment when the noise. Optical support up to 24bit/192kHz signal input. With sound effects adjustment, high and low sound individually adjustable. With pop sound control circuit,…

Unmatched Performance With Latest AKM DAC Chipset: SMSL has featured the latest-generation AK4493S AKM DAC chipset on the latest Sanskrit 10th MK3. The DAC here has been implemented with great precision, it delivers quality high-resolution audio signal decoding with ultra-low distortion ratings!! 3rd-Generation XMOS USB Processor: Sanskrit 10th MK3 utilizes a 3rd-generation XU316 USB processor chipset from XMOS Technologies. It allows for clear transmission of high-resolution audio signals via the Input port and handing them over to the DAC chipset. With the help of this latest USB Chip, the Sanskrit 10th MK3 decodes high-resolution 32-Bit/768kHz PCM and native DSD512 signals. New Upgraded …

The SMSL M500MK3 DAC uses the high-end ES9038PRO D/A chip from the American ESS company. it uses ES9311, the ES9311 special power supply chip for ESS high-performance DAC, the power supply noise is as low as 1uVrms. The third-generation ES9038PRO circuit design, the distortion is as low as 0.00006% , and more stable. The new PLFC headphone amplifier circuit enables the headphone amplifier to obtain more than 2W output power and less than 0.0001% distortion under a 16 ohm load! The new self-developed CK-03 clock processing circuit greatly reduces clock jitter. Built-in shielded, low-noise power processing, while improving power efficiency and lower power consumption. USB uses XMOS XU-316, a …

【Stunning Hifi Chip From Rohm】 SMSL VMV D2R decoder is equipped with an ROHM "BD34301EKV" DAC chip, which is part of ROHM's famous MUS-IC series. Built-in original sound quality design technology allows detailed sound quality inspection at the signal processing level. We optimized its performance and achieved surprisingly low THD+N (-117dB) and SNR (-130dB). This allows you to enjoy clear sound with minimal distortion even at high volumes. 【Using The Novel 3rd Generation XMOS XU316 Solution XMOS Technologies XU316 USB processor, the official driver is further improved and supports DOP and DSD native playback! It supports PCM sample rates up to 32bit/768kHz and DSD native playback up to DSD512…

【High Performance DAC AMP Chip】: The SMSL AO300 uses the MA5332MS power amplifier chip, the CS43131 decoding headphone amplifier chip, and the NJW1194 Volume Control Chip. These cutting-edge chips have been designed to deliver exceptional audio performance, with minimum distortion and interference. It supports MQA and MQA-CD decoding and restores the sound of the recording studio. 【2.1 Channel Audio Amplifier System】: The stereo amplifier features a 2.1-channel active audio system with subwoofer output, delivering an output power of 165W x 165W. This system has been carefully designed to provide an immersive audio experience with deep bass and rich sound quality. Bluetooth 5.1 also

Germany's Infineon's new silicon carbide digital power amplifier chip is of higher quality, while the efficiency is as high as 92%, which further reduces energy consumption. USB audio input, and supports driver-free use. With 2 sets of subwoofer signal pre-output, it is convenient to connect the active subwoofer to form a 2.1 or 2.2 system. Bluetooth 5.0 reception, better sound quality, longer transmission distance A large number of audiophile audio components are used to enhance the subjective sense of hearing. Built-in low-noise, high-power audio dedicated switching power supply to ensure a steady stream of music power. High-quality gold-plated input and output terminals. Complete protection …

Four-chip decoding for superior sound：The DL100 is capable of directly sampling 32bit/768kHz PCM digital audio without down sampling. lt also supports DSD256 native DSD playback without conversion.Optical and coaxialinputs support DOP 64. Newly upgraded headphone amplification circuitry：Adopts self-developed independent amplification circuit for excellent performance. Performance compared to the previous generation of CS43131 products, the output power increase of about 16 times at 300Ω. USB Dual Mode 2.0/1.1: There are 2 different USB modes that can be switched within the menu, using USB2.0, driver installation is required to support high sample rate audio files up to 768kHz/32bit. Using USB1.…

ROHM flagship DAC chip BD34301EKV, Fully optimized its performance, making its THD+N as low as -117dB! Built-in linear power supply composed of british porcupine toroidal transformer. Coordinate multiple low-noise regulated power supplies to provide a stable, reliable, efficient and low-noise power supply system. CK-03 clock processing circuit, the new self-developed CK-03 clock processing circuit greatly reduces clock jitter. Specially designed discrete component regulated power supply and multiple low noise regulated power supplies. Provides low noise power supply for analog circuits. Faster and more stable reception. Support LDAC(24bit/96kHz), APTX/HD, SBC, AAC!

The SMSL A50Pro has Getting ten crossover frequency points adjustable for High-pass and low-pass each.Subwoofer's volume can set it separetely,which perfectly can use well for different main speaker and passive subwoofer and build your real 2.1 speaker system. It is the best amplifier option for a home living room computer desk. Using 2 MA12070P German Infineon's new silicon carbide digital power amplifier chips, with higher quality and an efficiency of up to 92%, further reducing energy consumption. 3.5MM full frequency output is used for active subwoofers and speakers. Supports Bluetooth, fiber optic, HDMI audio, USB, and line input. The new Bluetooth 5.0 technology combines low power consumption …

CNC aluminum shell - Nice appearance,also greatly improved the heat dissipation capacity Chassis Temperature Display - With chassis temperature display, better control sound quality

Power consumption: two pieces of Germany Infineon's newSilicon Carbide DigitalAmplifier chips, higher sound quality with up to 92% efficiency further reduction. The new Bluetooth 5.0 technology with low power consumption and high sound quality makes wireless connection more convenient and efficient. 6 inputs: In terms of connectivity, the speaker supports Bluetooth, opticalfiber, coaxial, HDML audio, USB, line input and other possibilities tomeet of the user diverse use of the scene. Supports the HDML (ARC) audio return function, users can easily output audio via the HDML port on the TV, realizinga seamless connection to the home entertainment system Audio HDMI (ARC) return function: With …

Germany's Infineon's new digiral high-power amplifier chip. Japan's NJRC company electronic volume control chip NJW1194. It can be bridged into a single-channel amplifier with higher power to drive a large speaker. The built-in high-pass filter circuit can filter out the subwoofer, drive the main speaker, and cooperate with the subwoofer to form a 2.1 system. Equipped with subwoofer signal pre-output, it is convenient to connect active subwoofers to form a 2.1 system. 165W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.004% THD). 12-month warranty, you can return the item or replace a new one if you have any problems.

Dual Mono Design One AK4499EX per channel, distortion up to an amazing 0.00006%(-124dB) Qualcomm high-end Bluetooth chip, supports LDAC (24bit/96kHz), APTX/HD, SBC, AAC XMOS XU-316 XMOS new third generation USB solution Full lamination shows first-class texture. Higher light transmission to highlight the simplicity and beauty. Combined with fully laminated tempered glass display panel. High-quality and durable. 12-month warranty, you can return the item or replace a new one if you have any problems.

A300 uses the electronic volume control chip NJW1194 from the Japanese company NJRC, which has precise volume control and extremely low distortion. the new digital high-performance amplifier chip from Germany Infineon has higher quality, high efficiency and low energy consumption It can be bridged to a higher power single channel amplifier (BTL) to power large speakers. With the subwoofer signal pre-output, it is convenient to connect an active subwoofer to a 2.1 system. The built-in patented SMSL SDB sound effect and treble/bass adjustment function can easily adjust different speakers and music. the built-in high-pass filter circuit filters out the subwoofer, drives the main speaker and works …

【ES903902M D/A Chip】 SMSL DP5SE has a built-in ES903902M D/A chip from the American ESS company, which fully supports MOA hardware decoding. The signal-to-noise ratio reaches 126dB and the distortion is as low as 0.00009%. It is as close to the original sound as possible, allowing you to Enjoy the joy of original music in the studio. 【Rich Output Methods】S.M.S.L Music Player has multiple output methods. Analog output supports RCA, XLR, HP (6.35mm Jack), and digital output supports optical fiber, coaxial, AES/EBU, PS, BT, and USB audio. 【Input Method】 Streaming Media Playback input method includes SD card, LAN (SAMBA), OTG1, OTG2, USB-DAC, DLNA, air playback, Bluetooth, USB

The SMSL D400EX uses a flagship DAC chip, AK4191+two AK4499EX chips to unlock the entire potential of the chip. support MQA decoding and MQA CD. the new third-generation XMOS XU-316, the PCM supports 32bit/768kHz and the DSD supports DSD. 512. Dual mono design, one AK4499EX per audio channel, with a distortion up to 0.00006% (-124dB). 9-high-end dual op amplifiers and a large number of fever components are used. 2nd PLL is adopted to eliminate the jitter during SPDIF transmission. The new independently developed watch processing circuit CK-03 significantly reduces clock jitter. supports DOP independent display function and accurately assess the current decoding format. USB, fibre optic, coaxial,…

Qualcomm latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD, SBC, AAC. The 2nd generation XMOS solution supports DoP256 and native DSD512, and PCM supports up to 32bit/768kHz. 4x high-end dual op-amp OPA1612 and a large number of audio grade components. All input ports (except Bluetooth) support DSD transmission, coaxial and optical supports DoP64. Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits.