Amplifiers

Hand-wired all-tube two-channel combo amplifier from Custom series that is a bit of electronic wizardry and offers stunning clean tone and the complex, organic overdrive guitarists crave. Based on the original highly sought-after collector's piece, this model sings and snarls with the authentic Fender sound that birthed rock 'n' roll. The original all-tube 5E3 circuit is renowned for its early-onset distortion and highly interactive controls. The classic design is updated with improved volume pot tapers, offering more precise control at low settings used for rich, mellow clean tone from the Instrument and Mic channels. The hand-wired circuit includes premium yellow coupling capacitors chosen …

ATEN AP901 2.0 channels Black, Metallic

Class-d amplifier providing 50 watts/channel (RMS) into 8ohm loads or 65 watts/channel into 4ohm loads. Bridgeable output provides 120 watts into a single 8ohm load 4 pole detachable speaker screw connector (Phoenix connector) with support for up to 12AWG speaker wire. 12-volt trigger input for power-on/off. 12-volt trigger output for controlling other devices. Buffered loop output of original signal for connecting additional amplifiers Rear panel volume gain adjustment. Built-in thermal and short circuit protection circuits Includes rack-mount ears for mounting a single amp or two amps side-by-side

ES9068AS DAC Chip--- E50 uses the latest high-performance DAC chip ES9068AS. Our excellence in design and engineering provides realistic and transparent sound quality. The sound quality is good enough for all kinds of applications--- With the help of careful design and adjustment, E50 provides a distortion as low as 0.00009% and a dynamic range of 126dB, providing you with perfect sound quality. This also makes E50 suitable for applications: high-fidelity PC-HIFI system, mobile phone/tablet OTG, CD player/turntable external DAC, digital broadcasting external DAC, TV DAC, and so on. Ultra-low jitter for USB inputs, jitter is no longer anxious--- Using CPLD to process the clock and greatly

Germany's Infineon's new silicon carbide digital power amplifier chip is of higher quality, while the efficiency is as high as 92%, which further reduces energy consumption. USB audio input, and supports driver-free use. With 2 sets of subwoofer signal pre-output, it is convenient to connect the active subwoofer to form a 2.1 or 2.2 system. Bluetooth 5.0 reception, better sound quality, longer transmission distance A large number of audiophile audio components are used to enhance the subjective sense of hearing. Built-in low-noise, high-power audio dedicated switching power supply to ensure a steady stream of music power. High-quality gold-plated input and output terminals. Complete protection …

Integrated Amplifier / 5.1 / Bluetooth

Two-channel, Bluetooth 5.0, Digital Power Amplifier Board. Features: XH-A105 digital Power Amplifier Board with High Fidelity and Two-channel Stereo Sound Quality. Input Voltage is DC 12~24V, Audio Input Supports Bluetooth, TF Card, AUX 3.5mm Audio Line Input. Can Be Directly Connected to Mobile Phone, MP3, Etc. Power Amplifier Board It Also Comes with a Volume Adjustment Function, Which Rotates the Chirp Potentiometer Clockwise to Zoom in and Counterclockwise to Decrease. Specifications: Product Name: Two-channel Bluetooth 5.0 power Amplifier Board Product Model: XH-A105 Input Voltage: DC12-24V Current: More Than 3A Output Power: 100W*2 Audio Input: Bluetooth, TF Card, AUX Number of Chan…

Trade in your Naim SuperNAIT3 Black High-End Integrated Amplifier with AV.com. The benefits of trading in this specific product include the opportunity to declutter your audio equipment and reinvest in a newer model. The SuperNAIT3 could be a stepping stone to further audio exploration. Consider trying out integrated amplifiers from other brands or perhaps delve into power amplifiers for a more robust sonic experience. With AV.com trading in is not just about swapping equipment its about expanding your audio horizons.

Features: -- Two signal inputs: DVD signal and AUX signal -- LINE output, signal output can be connected to active subwoofer or other equipment signal source -- Center surround output, including center one, surround two -- With remote control -- bluetooth 5.0 -- With FM radio -- 5-band EQ mixer -- Reverberation, fine tuning, balance -- Support: plug in USB , SD, audio input (Computer/notebook, TV, projector, set-top box, DVD, mobile phone, lapd, etc.), 3 microphone inputs. -- with microphone reverb and delay adjustment Specifications: Model: AV-999BT Size: 430*310*130mm/16.9x12.2x5.1"" Voltage: AC 110V/220V Power: 3000W Channel: 7 channel Rated frequency: 20KH - 20KHz Signal to noise

D25 aims to create the most complete single channel clean amplifier experience available. Built on the D20’s award-winning framework, D25 adds a switchable gain boost & musical reverb in a Celestion V30-equipped lightweight combo. Use the Two notes reactive load & impulse response XLR-out for direct performance, play loud through the Vintage 30, or both! Be ready for any gig with touch-sensitive, record-ready clean & edge of breakup tones perfect for pedals.D25 is designed explicitly as a no-compromise practical tone tool that removes the barrier between you & your music. The tone you’ve always wanted paired with modern technology, completed by a dead-simple design. Revv's Dynamis Series

Fully balanced ▶ TOPPING PA7 utilize a newClass D amplifier circuit with a variety of exclusive optimization techniques, which has powerful low distortion performance and power output. These technologies ensure a clearer, cleaner, deeper sound without any background noise. In addition, the balanced structure is able to reduce noise during transmission, thus enabling better performance of the audio source and avoiding wasted performance during transmission. Distortion is as outstanding as DAC ▶️ The distortion performance of PA7 is matching good performing DACs. The distortion stayed extremely low before clipping. This ensures consistent listening pleasure across volume levels.

Flagship achievement flagship :D90LE uses ESS SABRE ES9038PRO, with 32bit Hyperstream architecture, achieves ultra-high performance in the audio field. Each channel of the D90LE will be arranged in parallel by 4 conventional balanced channels. This makes the performance of D90LE even better. Bluetooth 5.0 LDAC transmission: D90LE has the certification of Hi-Res Audio Wireless and LDAC. It uses CSR8675 chipset to support LDACIAAC/SBC/APTX/APTX LL/APTX HD protocol.To get even better sound quality from Bluetooth, we abandon the built-in DAC of CSR8675 and connect it'sdigital signal to ES9038PRO to decode. We use CPLD to process the clock and greatly optimize the digital signal, so that

Nice appearance,also greatly improved the heat dissipation capacity With chassis temperature display, better control sound quality. Powerful driving force, proper magnification and precise volume control make A1 can match most of the desktop small bookshelf boxes and most of the earphones and earplugs on the market, and adjust (for specific gameplay, please scan the code and refer to the official account arti cle) to Satisfactory timbre.

Collingwood PR3002 24V RGBW/RGB Power Repeater

DI Box / Desktop / Number of Channels 2

CG-10BT Guitar AmplifierClassically styled guitar combo in a vinyl covered cabinet with metal corner protectors and basket-weave style grille cloth. Front control panel is recessed with retro "chicken-head" control knobs and additional features for Gain, Volume and EQ, with an additional Drive boost switch. Custom solid-state circuitry is voiced to produce authentic vintage-style clean and driven tones. BT wireless pairing capability can be used for playing backing tracks for solo practice or just as a playback device. An ideal practice or recording amplifier for electric guitar players.DetailsPower supply 230Vac, 50Hz (IEC)Output 10WrmsSpeaker 165mm (6.5")Controls Gain, Drive, Volume, Treble,…