Amplifiers

The JBL MA710HP 7.2 Channel 8K High Performance AV Receiver transforms your home cinema experience with stunning 8K/60Hz and 4K/120Hz resolution and up to 7.2 channels of surround sound. As the first High-Performance model in the JBL MA series it features a low-noise Class D 125W RMS power output and Dirac Live Ready technology for advanced room correction ensuring optimal acoustics in any listening environment.Immerse yourself in Dolby Atmos and DTS decoding for a soundscape that truly maximises your speakers potential with lifelike spatial audio in a three-dimensional space. Stay at the forefront of home cinema technology with six HDMI inputs (three 8K and three 4K) and eARC support for seamless …

Cloudlifter CL-4 Mic Activator is based on Cloud's award-winning Cloudlifter technology that converts phantom power into an additional +25 dB of ultra-clean gain for low output dynamic and ribbon mics. Cloudlifters solve problems posed by noisy preamps and can be used to drive stronger, cleaner signals over long XLR cable runs. The single rack space CL-4 is simple and compact, featuring four rear-mounted sets of balanced XLR inputs and outputs and is ideal for broadcast, live sound, public address, and professional studio applications. Made in: USA

Features: Ultracompact lightweight hum eliminator, has a tough, rugged metal housing. This device breaks the ground loop safely, to remove 60Hz AC hum caused by ground loops. It automatically converts signal(unbalanced to balanced) with no any signal loss, for clear sonic quality. Passive noise canceller can work without battery or external power, convenient to use. 1 XLR/6.35mm channel, 1 XLR/6.35mm channel, 1 RCA channel, 1 3.5mm channel are equipped. Specifications: Material: ABS + Metal Color: Black Product Weight: 450g / 15.87oz Product Size: 11.5*10*3.7cm / 4.52*3.93*1.45in Package Weight: 570g / 20.10oz Package Size: 20*18*5.5cm / 7.87*7.08*2.16in Note: Simultaneous multichannel input …

Headphone Amplifier / Total Connected Load 40 W / Number of Channels 1

Redesigned new NFCA circuit based on the same working principle as the one in A30 Pro. It provides 2x power at 300 Ohm compared to L30. With the help of NFCA, L50 easily reaches the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Max output power: 3500mW x@16Ω, 540mW x@300Ω L50 adopts the New NFCA circuit. L50 has three gain options. Covering a wide gain range is sufficient to meet the needs of low-sensitivity full-sized over-ears to high-sensitivity 1EMs. With the help of extremely low noise 0.3uV, even lEMs will not hear any background noise.

TOA VM3360VA Alarm system amplifier 8.0 channels Black

The new NFCA amplifier circuit is specifically designed for portable amplifiers. The low idle power consumption allows for extended battery life. This is done while having 0.00007% THD+N and 135dB SNR. It's powerful and clean enough for power-hungry full-sized headphones and sensitive IEMs. The NX7 can output 180mW of high power under a load of 300 ohms, and with the help of 3 step gain setting, the small body can easily beat the full-sized headphones. It is worth mentioning that even when the output is 200mW, the load distortion is only 0.00008%. The low gain of NX7 is -13.8dB. When used with high-sensitivity in-ear headphones, there will be almost no trouble of potentiometer bias in the

DSD support up to DSD512 native hard resolution, support Native DSD driver. Keep improving,not only good sound quality. Professional shape design with anodized CNC aluminum housing. AKM New AK4493S: Using a piece of AKM's new AK4493S, and carefully adjusted to achieve an unprecedented 0.00013%! High performance power filtering system: Built-in high performance power filtering system for optimal performance using only USB port power! The design purpose is: to occupy minimal space on the desktop, it has three placement modes as shown below, in these three placement modes, because it has a built-in digital acceleration sensor, so it will automatically switch the direction of the display.

RMS-series Multi Zone 100V AmplifiersMulti-channel 100V slave amplifier with independent outputs for 100V or 4-16 Ohm speakers. Each amplifier channel has its own independent line input, which can be switched to a global auxiliary, providing the option of the same input to several of the amplifier channels if required. A paging microphone input is provided for voice alerts and a 24V mute terminal can be connected to an alarm panel for emergency evacuation override. Class D circuit design and efficient toroidal transformers have enabled a design which fits into a 1U rack-mount housing. The RMS-series amplifiers can be applied as high power slave units or equally as a fully independent zoning …

The Topping PA5 MKII Plus is a first-rate compact power amplifier building on the superb quality of the PA5 MKII but with enhanced power capacity. It provides up to 140W at four ohms and 85W at eight ohms per channel. Built with a fully balanced structure and an efficient Class D amplifier circuit the PA5 MKII Plus eliminates unwanted hum and noise to magnify any stereo speakers. With distortion levels measured as low as 0.0003 per cent (eight ohms at five watts) a frequency response of 20Hz - 40kHz and a 124dB dynamic range the PA5 MKII Plus effortlessly produces crystal-clear audio for an excellent listening experience. This power amplifier boasts RCA and TRS inputs enabling easy connectivity …

Electric guitar combo amplifier with 10W RMS power, 6,5“ speaker, 1x guitar input, 3-band EQ - treble, mid, bass, gain and volume control overdrive can be activated, stereo plug input for aux, output for headphones (mini plug). Colour: black Power Supply: 240V Power: 10 W UK/EU Power supply included: No Made in: China Headphone Output: Yes Power (Watt): 10.0 MP3 / Line In: Yes Speakers: 1x 6,5 " Number of Input Ports: 1 Number of Channels: 2 Reverb: No Battery Operation: No USB: No DI Output: No Type: Guitar Combo

Compatible with DSD256 and PCM384 - D10s is compatible with 16-32bit/44.1-384kHz and DSD64 - DSD256(support both Dop and Native) XMOS XU208 and Customized Driver - D10s use XMOS XU208 for USB interface and use customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.And use ESS ES9038Q2M to make THD+N as low as 0.0002%@1kHz Automatic Power On/Off - Although the USB port support power after PC has shutdown,D10s still will synchronously power on/off with PC Replaceable OP - It has OP amp socket,DIYer could change the OP amp to get different sound.Notice:D10's electrical parameters will change if use other OP Multiple Applications …

Superior Audio Quality : The DX1 features a 32-bit AK4493S DAC chip, providing stunning 120dB of dynamic range and

Power Amp / Stereo / Output power per channel 500 Watt / XLRIn Balanced

TOA A-2120DD audio amplifier 1.0 channels Performance/stage Black

UA Series Compact 100V Mixer-Amplifiers Compact Amplifier in a half width 1U housing, 3 switchable mic/line inputs, an RCA line input and a 3.5mm Aux input. All governed by a front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable terminal connector on the rear panel. Supplied with rack-mounting hardware, which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations. PRODUCT FEATURES: Supplied with hardware for rack-mounting 2 units 5 input channels 24V fire alarm mute contacts 100V line or 8 Ohms operation SPECIFICATION: …

Features: MINI STEREO AMPLIFIER Brand New High Quality Product Further details about the product, Please read full description