Amplifiers

DI Box / Desktop / Number of Channels 2

The Xvive P1 Portable Phantom Power Supply is a low-noise, 12V / 48V power supply. It runs on an internal rechargeable battery and has enough power to run high-current microphones. The P1 allows you to use microphones and devices that require external power in any setup. The small size, light weight, rugged construction, and exceptionally low noise of the P1 makes it perfect for powering microphones to send a signal to mixing consoles, or any type of processor or recording unit, that does not supply phantom power. Long battery life and a bright LED battery indicator ensure that the microphone is properly powered throughout your recording session. Made in: China Package Contents: Charger;Manual Switch: …

Features: 1.Precise cuts and interfaces ensure perfect fit, fit for mounting position and easy to install. 2.The product uses high quality materials, effectively avoid corrosion and wear out, and durable. 3.Professional chip set provides superior performance in the system. 4.Easy to operate, anti-aging, and extended service life. 5.On-board dial potentiometer to adjust the volume output. Specifications: Material: ABS Color: As picture shown Size: Approx. 5*4*2.5cm/2*1.6*0.98in Onboard TDA7297 audio power amplifier chip, dual channel 15W+15W, suitable for 4-8 ohm 10-50W speakers; The main pin of the chip has been taken out, convenient for external device control. The onboard 2 channel 5.08 (mm) …

Features: 1¡¢The waterproof 4 pole speaker plug jacket is suitable for cables with a diameter of 6~15mm, which is fully in line with the industry standard for speaker connection 2¡¢Humanized locking design with chuck type stress release, accurate and reliable twist lock latch system is easy to operate 3¡¢The speaker plug has an extremely reliable and sturdy cable connector with a reliable locking system 4¡¢The product contact with the screw terminals firmly, including multi strand protection, and solder terminals 5¡¢The audio connector has a continuous rated power of 30A rms, nickel plated brass contacts possess good electrical conductivity, reliable connection, used in plug ins and shells to …

The maximum power is 450W+450W and RMS 70W+70W, which can be used for multi speaker impedance of 4-16 ohms, allowing you to enjoy high-performance speakers or components. It has roaring bass, crisp treble, and excellent richness, and most amplifiers can only be used for reminders. 2 microphone inputs are perfect for karaoke Allow 12V DC or 110V/60Hz AC power adapter input. Our -55 amplifier comes with an AC power cord, so you don't need to purchase an additional AC power cord. This stable power supply can maintain stable playback of all types of music. Specification: Model: AK55 Impedance: 4-16 Bluetooth: 5.0 RMS power: 70Wx2 power: 450W x2 Channel: 2.0 Voltage: DC 12V or AC 90-240V : 85 …

The maximum power is 450W+450W and RMS 70W+70W, which can be used for multi speaker impedance of 4-16 ohms, allowing you to enjoy high-performance speakers or components. It has roaring bass, crisp treble, and excellent richness, and most amplifiers can only be used for reminders. 2 microphone inputs are perfect for karaoke Allow 12V DC or 110V/60Hz AC power adapter input. Our -55 amplifier comes with an AC power cord, so you don't need to purchase an additional AC power cord. This stable power supply can maintain stable playback of all types of music. Specification: Model: AK55 Impedance: 4-16 Bluetooth: 5.0 RMS power: 70Wx2 power: 450W x2 Channel: 2.0 Voltage: DC 12V or AC 90-240V : 85 …

AMP 2.2 LN - Stereo amplifier with level controlsFor operating small speakers with impedance of 4...8 Ohms (multimedia applications)Can be directly connected to the line or headphone output of a computer sound cardThe input sensitivity is adjusted using a level adjuster on the front of the housingAudio input and speaker output via a 3.5 mm jack bush (stereo)Robust metal housing with two mounting lugsTypical applications:• Info terminals• Computer screens• ShowcasesDetails

High-quality phono stage for entry-level and mid-level record players Amplification and RIAA equalisation for Moving Magnet (MM) cartridges Special low-noise components, external power supply and internal shielding all help improve the overall sound Small size and attractive chassis allows installation close to record player

Features: Support 1 set of power amplifier stereo input, 1 set of speakers stereo output. Easily control the volume of the left/right sound channel of the passive sound box separately. Each channel supports up to 150 watts output. All metal constrution, wellmade, and sturdy for long term use. Easy to install, no external power supply required, plug and play. Specifications: Material: Metal Color: Black Frequency Response: 10Hz50Hz Output Impedance: 416 ohm Speaker Cable Size: maximum 14 AWG Item Size: 15*6.8*5.5cm / 5.9*2.67*2.16in Item Weight: 700g / 24.69oz Package Size: 18.5*13.5*6.5cm / 7.28*5.31*2.55in Package Weight: 800g / 28.21oz Packing List: 1 * Volume Control Box?

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases (or decreases) the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 100 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. Supports amplifiers with up to 300 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. Support amplifiers with up to 300 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets. It increases (or decreases) the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier.

Features: Passive Preamplifier Active Speaker Volume Controller: precise volume adjustment, no loss, compatible with all types of playback devices and external active speakers. Professional 128mm Fader Switch for Volume Adjustment: the accuracy error of fader switch is small, the left and right channels are synchronized better, and there is no loss of sound details. Compact & Exquisite Size: the volume adjuster with intuitive scale designed makes the desktop volume adjustment more convenient and precise. Plug and Play, Simple Installation: able to be used once inserted, convenient to install, signal source non consumption adjustment, no loss of input and output, perfect for you to enjoy different …

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 100 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

It took Joyo’s engineers two years to develop this patented new product: TheJAMBUDDY Combining guitar playback with its reduced high frequency range due to the sound of 12 inch speakers and also full range normal music playback is a difficult task. Some products on the market have already dealt with this issue and they are nice practice boxes that are controlled by hand on a table top. But this is not how guitar players operate their gear, we need our hands free and we stick our gear with our feet. JAMBUDDY combines both aspects, it is a floor based dual channel amp simulator that can be switched with your feet and also accepts a BLUETOOTH signal to play back your favorite backing tracks and so…