SFP Transceivers TP-LINK

The TL-SM311 series Fibre Module Cards are introduced for extending transfer distance, attached to our managed/web smart switches. They can extend the distance to several kilometres even tens of kilometres which can basically satisfy the distance requirement of LAN. Users can choose whether and which items to use the fibre modules according to the demand in order to lower cost.

TP-Link´s TL-SM321B adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km with TP-Link´s Routers, Switches, Media Converters to provide high speed and stability.

The TL-SM311 series Fibre Module Cards are introduced for extending transfer distance, attached to our managed/web smart switches. They can extend the distance to several kilometres even tens of kilometres which can basically satisfy the distance requirement of LAN. Users can choose whether and which items to use the fibre modules according to the demand in order to lower cost.

The MC220L is a media converter designed to convert 1000BASE-SX/LX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the LC-Type connector. It works at 850nm on both transmitting and receiving data when adopting multi-mode fiber and 1310nm on both transmitting and receiving data when adopting single-mode. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19" system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC220L will transmit at …

Specifications:Performance:- Sfp Transceiver Type: Fiber Optic- Maximum Data Transfer Rate: 1250 Mbit/S- Interface Type: Sfp- Multi-Mode Fiber (Mmf) Supported: Yes- Fiber Cable Diameters Supported (Core/Cladding): 50/125 µm- Maximum Transfer Distance: 300 M- Wavelength: 850 Nm- Networking Standards: Ieee 802.3ae- Power (Input Voltage): 3.3 V- Operational Conditions:- Operating Temperature (T-T): 0 - 70 °C- Storage Temperature (T-T): -40 - 85 °C

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector.

1000Base-BX WDM Bi-Directional SFP Module
- Adopts the latest standard 1000Base-BX
- Up to 2 km transmission distance in 9/125 μm SMF (Single-Mode Fiber)
- Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
- Supports Digital Diagnostic Monitoring (DDM)
- Supports Hot Swappable
 
  What This Product Does
TP-LINK´s TL-SM321B-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver TL-SM321B-2 uses an integrated LC Bi-Directional optical interface connector and the data link is up to 2 km in 9/125 μm SMF (Single-Mode Fiber). …

The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector.

TP-Link´s TL-SM321A adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km with TP-Link´s Routers, Switches, Media Converters to provide high speed and stability.

Highlights: Complies With 802.3U 10/100Base-Tx 100Base-Fx Standards. Link Fault Passthrough And Far End Fault Minimize The Loss Caused By Link Failure Timely Provides Switch Configuration Of Half-Duplex / Full-Duplex Transfer Mode For Fx Port. Extends Fiber Distance Up To 20Km     What This Product Does The Mc110cs Is A Media Converter Designed To Convert 100Base-Fx Fiber To 100Base-Tx Copper Media Or Vice Versa. Designed Under Ieee 802.3U 10/100Base-Tx And 100Base-Fx Standards The Mc110cs Is Designed For Use With Single-Mode Fiber Cable Utilizing The Sc-Type Connector. The Mc110cs Supports Longwave (Lx) Laser Specification At A Full Wire Speed Forwarding Rate.…

Complies with IEEE 802.3ab and IEEE 802.3z standards.-Ability to set the switch for Force/Auto transfer modes for the FX port.-Increases the range of fiber optics up to 0.5km.The MC200CM is a multimedia converter designed to convert 100BASE-SX fiber to 1000Base-T cable or vice versa.Designed to IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX, the MC200CM is used with multimode optical fiber using the SC connector.The MC200CM supports shortwave (SX) laser at full wire speed transfer rate.It works at 850nm transmitting and receiving data.Other features of this module are the possibility of use as a stand-alone device (no rack required) or with TP-LINK´s 19 system rack, Auto MDI/MDI-X for the T…

The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

TP-Link TL-SM5310-T.SFP transceiver type:Fiber optic, Maximum data transfer rate:10300 Mbit/s, Interface type:SFP+.Product color:Silver.Input voltage:3.3 V.Number of products included:1 pc(s).Specifications:-Input voltage:3.3 V.-Operating temperature range:0 -70 °C.-Storage temperature range:-40 -85 °C.-Maximum temperature:70 °C.-Number of products included:1 piece(s).-Harmonization System Code (HS):85369010.-Ethernet:Yes.-Ethernet interface type:10 Gigabit Ethernet.-Copper Ethernet cabling technology:10GBASE-T.-SFP transceiver type:Fiber optic.-Maximum data transfer rate:10300 Mbit/s.-Interface type:SFP.-Maximum transfer distance:100 m.-Network standards:IEEE 802.3, IEEE 802.3ab, IEEE 802.3an…