Submersible (Drainage) Pumps Tsurumi

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps small soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150 Watt motor has overload protection. Built in handle. Hose connector included and 10m of heavy duty H07RNF cable.

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps small soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150 watt motor has overload protection. Built in handle. 10m of heavy duty H07RNF cable included.

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps small soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150 watt motor has overload protection. Built in handle. 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - auto will turn on at 251mm and off at 81mm and work in confined areas.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps large soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150w motor has overload protection. Built in handle. Hose connector included and 10m of heavy duty H07RNF cable. Selectable manual or auto mode - auto will turn on at 285mm and off at 100mm and work in confined areas.

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps small soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150 watt motor has overload protection. Built in handle. Hose connector included and 10m of heavy duty H07RNF cable. Selectable manual or auto mode - auto will turn on at 251mm and off at 81mm and work in confined areas.

Automatic submersible pump, with manual operation switch, for pumping water from flooded areas, cellars, sumps and for water transfer. Pumps small soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy motor has overload protection. Built in handle. Hose connector included and 10m of heavy duty H07RNF cable. Level control float switch will turn on at 220mm and off at recommended lowest running level of 110mm, but adjustable by 60mm to 120mm. External rotary switch for changing from manual to automatic operation.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

For heavy and continuous duty pumping of water levels down to 1mm. Ideal for draining water on flat roofs, car-parks, concrete shuttering, lift-shafts and basements. For use in tool-hire, on building sites, flood defence and general drainage of building sites, Pumps water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from tough steel and rubber. Built in handle. 10m of heavy duty H07RNF cable. Hose connector adjustable to two positions to avoid hose kinking.

For heavy and continuous duty pumping of water levels down to 1mm. Ideal for draining water on flat roofs, car-parks, concrete shuttering, lift-shafts and basements. For use in tool-hire, on building sites, flood defence and general drainage of building sites, Pumps water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from tough steel and rubber. Built in handle. 10m of heavy duty H07RNF cable. Hose connector adjustable to two positions to avoid hose kinking.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

The 50PNI2 is a light and compact automatic pump with an energy efficient motor and integral anti-airlock valves. It feature a dual control float-switch which enables manual and automatic operation. This switch is also adjustable to enable individual setting of on and off levels. The float is bell shaped and small, which make these pumps suited to applications where a sump is narrow, that require precise level control or where a traditional pendant type float’s operation could be fouled. Liquid paraffin is used for the lubrication oil, which enables use in food processing and aquaculture. They are not recommended for ponds or water features.

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable. Selectable manual or auto mode - auto will turn on at 607mm and off at 115mm with some adjustment to turn on lower.

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable.

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable.

Ideal for heavy and continuous duty pumping on building sites, ditches, footings, processes etc. Used extensively in tool hire. Pumps water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from tough steel and rubber. Built in handle. 10m of heavy duty H07RNF cable. Hose connector adjustable to two positions to avoid hose kinking.

Ideal for heavy and continuous duty pumping on building sites, ditches, footings, processes etc. Used extensively in tool hire. Pumps water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from tough steel and rubber. Built in handle. 10m of heavy duty H07RNF cable. Hose connector adjustable to two positions to avoid hose kinking.