Amplifiers

The Topping PA5 MKII Class D Power Amplifier adopts a fully balanced structure ensuring a clean powerful audio output. It can deliver up to 65W at eight ohms (THD+N

Double your fun with two channels of active ultra-clean gain. Provides two channels of up to +25dB of ultra-clean gain and optimal impedance loading for dynamic and ribbon mics to perform their best. Simply connect one or two dynamic or ribbon mics to the input and connect a mixer or preamp to the output. Great for two mono channels or a stereo configuration. Turns Phantom Power into gain and clarity without passing it through to your delicate ribbon mic. The Cloudlifter allows you to cut through the mix on stage with increased gain before feedback. The Cloudlifter's discrete JFET circuitry preserves the source's natural sound while keeping the direct audio path clear of transformers,

2-zone Mixer-amplifier + USB/SD/FM/BluetoothMixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/line and 2 line inputs with an integral USB/SD/FM player and Bluetooth receiver can be enabled independently to either of the 2 zones. Mic 1 channel has a variable override and switchable phantom power for use with condenser microphones. Designed for installations where independent paging and audio to 2 separate zones is needed.DetailsPower supply 110-230Vac, 50/60Hz (IEC)Power : output 2 x 120W rmsAudio source USB/SD/FM/BT audio playerInputs 1 x mic (XLR), 2 x mic/line (jack), 2 x line (twin RCA)Zone outputs: line 2 x RCAZone outputs: speaker 2 …

Integrated Amplifier / Stereo / Output power per channel 80 Watt / 1x S/PDIF IN (RCA Coaxial) / HDMI Connection HDMI-ARC / Max Sample Rate 384 kHz / Bitrate 32 bit / DLNA Network Function / WiFi / Streaming Service Spotify

Redesigned new NFCA circuit based on the same working principle as the one in A30 Pro. It provides 2x power at 300 Ohm compared to L30. With the help of NFCA, L50 easily reaches the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Max output power: 3500mW x@16Ω, 540mW x@300Ω L50 adopts the New NFCA circuit. L50 has three gain options. Covering a wide gain range is sufficient to meet the needs of low-sensitivity full-sized over-ears to high-sensitivity 1EMs. With the help of extremely low noise 0.3uV, even lEMs will not hear any background noise.

DI Box / Desktop / Number of Channels 2

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play, turn your PC into a HIFI source : USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. Supports amplifiers with up to 300 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

The Naim CI-Uniti 102 Streaming Amplifier is an all-in-one solution for home or commercial audio installations supporting services like Tidal Spotify and AirPlay 2 allowing you to enjoy high-quality music from any source. The ultra-quiet built-in amplifier delivers 150W at eight ohms ensuring powerful sound without distortion even at loud volumes. Versatile connectivity options include HDMI eARC Bluetooth S/PDIF and analogue inputs making it easy to integrate into a range of entertainment setups including TV. The two independent RCA outputs enable you to connect subwoofers or create separate audio zones providing flexibility in your setup. Plus the Naim CI-Uniti 102 is rack-mountable and supports …

Integrated Amplifier / Stereo / Output power per channel 35 Watt / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

The C480 B is the pre-amp for the ultralinear series capsules, CK61, CK62, CK63, and CK69 ULS, and represents one of the quietest microphone amps ever built. The C480 B offers excellent audio quality and maximum flexibility. Its electronic circuitry coupled with a transformerless output stage assures completely linear transfer characteristics across the entire frequency range, while achieving self-noise figures close to the theoretical minimum.A specially designed output stage drives difficult loads like excessively long cables without harming the signal quality. The C480 B offers a two-step high-pass filter and two gain stages of either -10dB or +6dB. Made in: China

・Product Description・ An audio interface with a sophisticated design, high-quality sound, and convenient features The Arturia MiniFuse 1 is a compact audio interface recommended for vocalists and guitarists who want to start DTM in a simple environment. Despite being an entry-level model, it delivers high-quality sound and low noise. Its lightweight, compact, and sturdy die-cast aluminum body incorporates many useful features, including direct monitoring, loopback, and a USB hub. With a beautiful, sleek design, MiniFuse is available in black or white. Ableton Live Intro (DAW software), Analog Lab Intro (software synthesizer), and other software necessary for music production are

Product model: XY-S350H Product name: 2.1 channel Bluetooth audio power amplifier board Power supply: above DC12-38V/10A Bluetooth version: 5.1 Audio channel: 2.1 channel Audio input: Bluetooth+AUX+U disk+USB sound card Audio output: left and right channels + subwoofer Frequency range: 20HZ-20KHZ Volume adjustment: high-end encoder knob adjustment, smooth feel Maximum output power of left and right channels: 220W/3Q-36VDC 175W/4Q--36VDC 100W/8Q-36VDC Maximum output power of the subwoofer: 355W/2Q-36VDC 250W/3Q-36VDC 195W/4Q-36VDC Protection mechanism: protection against overvoltage, undervoltage, clipping, short circuit, overheating, etc. Unique function: Support Sinilink-APP to modify the …

Do you have trouble in connecting 2 sets of power amplifier and 8 sets of loudspeakers? Do you have trouble in making 2 sets of power amplifier and 8 sets of loudspeakers to sound at the same time? One strong power amplifier and loudspeaker distribution device is able to solve the above problems. Features: 8 sets of stereophonic loudspeaker, push-button selection to switch output. 8 sets of loudspeakers can be turned on at the same time, and can be individually turned on or off, manual selection. Signal input provides signal no-load protection for the power amplifier. Adopts convenient snap fastener type wiring terminals, able to accept up to 12AWG loudspeaker wires. Input channel supports …

NAD C 427. Power consumption (standby): 0.5 W. Width: 435 mm Depth: 315 mm Height: 99 mm

Power Amp / Mono / Output power per channel 700 Watt

TOPPING D50 III - 3rd Generation Upgraded Version The D50 III uses 2x ES9039Q2M, one for the left channel and another for the right channel,which delivers higher SNR(132dB), higher dynamic range(132dB), and lower distortion(