Chargers & Jump Starters Victron Energy

Victron Energy M6 eyelet connector with fuse is an accessory of the Blue Power IP65 Charger with DC connector
This connector features M6 eyelets for connection to the battery and an in-line, splash-proof fuse holder fitted with a 30 amp standard blade (ATO) fuse for protection against accidental shorts
This connector is useful if you have a hard-to-reach battery as you can leave the eyelets permanently connected to the battery and just plug the charger into the connector when required
It's also a good option if you need M6 eyelets for your battery connections rather than the M8 eyelets
The traffic light system shows your battery charge status simply and clearly

Charger Accessories / Length of Cable 200 cm

The indicator panel shows the battery charge status of the battery.Is an accessory for boots Blue Smart IP65 and IP65 Blue Power chargers.I suitable for lead-acid batteries of 12 V (flooded, GEL, AGM).

Liquid crystal displayFor status monitoring and set-up
Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable.
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Current: 5 A
Voltage: 12 …

Liquid crystal displayFor status monitoring and set-up
Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable.
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Current (A): 10.0
Current: …

Protection Overvoltage Protection / Peak Current 250 A

The VICTRON ENERGY Smart 12/24V 65A Protector Blue is a smart and efficient device designed to protect electronics and batteries in a 12 or 24-volt system. With a maximum output current of 65A, it offers reliable protection against power surges, short circuits, and overloads.One of the key features of this protector is its smart technology, which enables it to automatically detect the voltage of the system and adjust its settings accordingly. This makes it suitable for both 12V and 24V systems, providing users with flexibility and convenience.The Protector Blue is specifically designed for use in conjunction with batteries, ensuring the safety and longevity of the battery bank. It functions …

The Victron Energy 12/24V-100A Battery Protector is a high-quality device designed to protect electronic batteries in various applications. Featuring a sleek black color, this battery protector provides essential functionalities to ensure the smooth and safe operation of your battery-powered electronics.This battery protector is capable of handling both 12V and 24V battery systems, making it highly versatile for different types of setups. With a maximum current capacity of 100 amps, it can effectively protect batteries in demanding environments, such as in off-grid power systems, boating, camping, or automotive applications.Equipped with advanced electronics, the Victron Energy 12/24V-100A Battery …

Protects the battery against excessive discharge and can be used as a system on/off switchThe Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. The on/off input can be used as a system on/off switch.
12/24 V auto rangingThe Smart BatteryProtect automatically detects system voltage one time only.
Bluetooth: programming made easyWhen using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual). If …

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect …

The Blue Smart Charger IP65 is the new professional battery charger with built-in Bluetooth.The Blue Smart IP65 charger can be used in devices in your workshop and motor vehicles, as (classic) cars.motorcycles.boats and motorhomes.

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect …

The Victron Energy 12/24V-220A Battery Protector Black is an essential electronic device designed to protect batteries from overcharging, deep discharging, and high or low voltage conditions. It is a versatile product suitable for use with both 12V and 24V battery systems, making it compatible with a wide range of applications.Featuring a sleek black design, this battery protector is not only functional but also aesthetically pleasing. It is a durable and reliable device, built to withstand rigors of everyday use. The compact size of the device allows for easy installation and ensures it can fit in limited spaces conveniently.Equipped with advanced electronics, the Victron Energy 12/24V-220A …

The VICTRON ENERGY Smart 12/24V-220A Protector Blue is an advanced electronic device designed to protect batteries and electrical systems in vehicles or marine applications. It is specifically designed to offer reliable battery protection against over-discharge, over-temperature, and short circuit events, ensuring maximum safety and battery longevity.This smart protector is suitable for both 12V and 24V systems, making it versatile and adaptable to a variety of battery setups. Its compact and intelligent design allows for easy installation and integration into existing electrical systems, maximizing convenience for users.The VICTRON ENERGY Smart 12/24V-220A Protector Blue features built-in Bluetooth …

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect …