Submersible (Drainage) Pumps

This Heavy Duty Submersible Sewage Pump is suitable for draining waste & clean water or sewage containing solid bodies up to 31mm, whilst the float switch automatically turns the pump off when the water level drops.

The DG Blue Professional is a submersible pump is suitable for pumping water polluted with suspended solid particles. The cast iron vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 50mm. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Agriculture /farming Sewage and treatment works Civil construction

The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

The GE-DP 18/25 LL Li is an all-rounder for pumping out clean or dirty water, and due to its battery powered design it can be conveniently used in a wide variety of locations, whether or not there is a mains power source nearby. It is part of the Power X-Change cordless system and shares battery compatibility with a wide variety of additional tools for the home and garden. The pump is suitable for waste water with particles up to 25mm in size, or for clear water with particles up to 1mm. At 3.3kg, it is easy to transport and features an integrated carry handle. Features & Benefits • Member of the Power X-Change family (requires one 18v battery) • 2-in-1 combi pump: Clean water or

Usage: This 2.0CN twin impeller shower pump is designed to help boost your water pressure of both your hot and cold water supply to a single shower, bath, shower mixer or mixer tap. Compatibility: When you want to install a shower pump which is situated level or slightly above the cold water tank, then you need a negative head pump. It sucks water from the tank that feeds straight to your shower. Installation: Grundfos shower pumps are easy to install. Everything that you will need for installation is included for you. Motor: Continuously rated shower pumps effectively run until the user turns it off. This is ideal when the shower needs to be used frequently. Guarantee: This product comes …

The Einhell clear water pump GE-SP 18 LL Li – Solo offers wireless freedom and a powerful motor. The water pump really comes into its own when clear water needs to be pumped out. It also masters its task in remote locations not connected to the conventional power grid. It is a member of the Power X-Change family, so all batteries in the system series can be used. With its ingenious design, it is equipped with a flexible battery box with integrated cable holder. The long cable connection enables deeper immersion of up to 4 metres. The three-stage switch includes a continuous operation function. A large flow rate of up to 4500 Litres/h is ensured by the powerful motor. In this case, the

For heavy and continuous duty pumping of water levels down to 1mm, with a rubber moulded electronic level probe switch. Ideal for automatic control of water levels on flat roofs, car-parks, concrete shuttering, lift-shafts, basements and during incidents of flooding. Power saving as will only operate when probes sense water (not run continuously), then operate for 1 minute after level drops below probes, but continue pumping if probes touch water again during this time. Start level depth of water is approximately 170mm, but probe extensions to turn on approximately at depths of 70mm (70mm kit) and about 5mm (170mm kit) are an optional extra. Pumps water with sand and silt in suspension. Made

The DR Blue Pro is a submersible drainage pump with an open, multi-channel impeller for most soiled water applications. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Civil construction

The Trencher Range of submersible 2" drainage pumps are compact, light and powerful and are suitable for ground water and water containing sand and silt. The built in agitator makes this pump ideal for removal of dirty water. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable.

The TDP 370 E is a 700 watt drilling pump at max. pressure. 3.7 bar, discharge height max. 40 meters and max. immersion. 20 m perfect for drafting clear water from deep water points with a minimum diameter. 125 mm. For watering gardens, vegetable gardens, flower beds and potted flowers, through automatic installation (sprinklers, sprinklers) or traditional watering can – water from a borehole, well or cistern saves on tap water for a multitude of tasks. A stainless steel filter strainer is integrated to filter any suspended particles, so the clear water can be used as cleaning water and/or for feeding certain household installations such as washing machines or toilets. This extremely compact pl…

TOP-VORTEX Submersible pump for Dirty Water INSTALLATION AND USE The TOP-VORTEX pump is suitable for use with dirty water that is not chemically aggressive towards the materials from which the pump is made. As a result of the design solutions that have been adopted, such as the complete cooling of the motor and the shaft with double seal, these pumps are easy to use and reliable. They are suitable for use in applications such as clearing dirty water, emptying tanks, discharging domestic waste water, and for emptying collection traps containing suspended solids up to a maximum of Ø 20 mm. FEATURES Liquid type: dirty water Uses: domestic APPLICATIONS: drainage, dirty water - slightly solid

400W Puddle Pump with Auto sensor - This submersible pump is ideal for draining flooded cellars, sumps etc. This is the perfect solution for clearing shallow bodies of water such as spillages because of its ability to pump as low as 1mm from the floor. Note: Suitable for use with clean water only

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps small soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150 watt motor has overload protection. Built in handle. 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - auto will turn on at 251mm and off at 81mm and work in confined areas.

The Trencher Range of submersible 2" drainage pumps are compact, light and powerful and are suitable for ground water and water containing sand and silt. The built in agitator makes this pump ideal for removal of dirty water. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering

Ideal for heavy and continuous duty pumping on building sites, industrial processes, tunneling,mines and quarries . Pump water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from heavy duty cast iron, tough steel and ductile iron. Built in handle. 20m of heavy duty H07RNF cable. Supplied with two hose connectors: spigot and mBSP Both adjustable to two positions to avoid hose kinking.

Ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. Shifts both clean and dirty water including particles upto 35mm dia. Fitted with a float switch for automatic water level control. The stepped adaptor fitting allows for connection of 32 mm (1¼”), 25 mm (1”), or 19 mm hoses which should be secured with a hose clamp.

Clarkes top quality submersible pump handles both clean and dirty water. Robust build, and a heavy duty impellor means the CSV2A Vortex Pump will not only handle dirty, brackish water, it's also able to pass solids up to 30mm diameter. And, even better, it's fitted with an automatic float switch, a simple yet clever device that switches the pump on as the water level rises, and switches it off once the pump has done it's job and reduced the water level.