Amplifiers

The JBL MA710 8K AV Receiver is designed for 7.2 channel speaker systems making it an ideal centrepiece for a high-end home cinema. The Class D amplifier delivers low-noise powerful sound at 110W per channel at eight ohms enhancing films and TV shows. Enjoy a multi-dimensional soundstage with Dolby Atmos and DTS decoding bringing cinema magic to your living room. The MA710 includes six HDMI inputs three for 8K/60Hz and three for 4K/120Hz while the eARC output supports high-quality audio and visuals from your TV Blu-ray player and game console. The built-in 192kHz/24-bit DAC supports various digital audio formats enhancing your favourite songs. Like all models in the MA series this receiver …

Class D amplifier providing 150 watts/channel (RMS) into 8 ohm loads or 225 watts/channel into 4-Ohm loads Bridgeable output provides 450 watts into a single 8-ohm Load 4-Pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire Built-in thermal and short circuit protection circuits Includes rackmount ears

Superior Audio Quality : The DX1 features a 32-bit AK4493S DAC chip, providing stunning 120dB of dynamic range and

Power Amp / Mono / Output power per channel 700 Watt

TOA A-2030DD audio amplifier 1.0 channels Performance/stage Black

UA Series Compact 100V Mixer-Amplifiers Compact Amplifier in a half width 1U housing, 3 switchable mic/line inputs, an RCA line input and a 3.5mm Aux input. All governed by a front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable terminal connector on the rear panel. Supplied with rack-mounting hardware, which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations. PRODUCT FEATURES: Supplied with hardware for rack-mounting 2 units 5 input channels 24V fire alarm mute contacts 100V line or 8 Ohms operation SPECIFICATION: …

Supplied with 35 m loop wire for setting up an induction loop, SCART adapter, PSU Integrated alarm signal can be switched on additionally Dynamic compressor. 2-way tone control Adjustable input sensitivity for line and microphone LEDs for power, signal/PEAK and loop current

Collingwood PR3002 24V RGBW/RGB Power Repeater

Mono class D PA mixing amplifier, 1 x 1,000 W. Class D concept with PASCAL amplifier module. Energy-efficient concept due to high efficiency. Lightweight design due to compact switch-mode power supply. Silent operation due to fanless cooling concept. 4 balanced mic/line inputs. Mic 1 with priority circuit and automatic talkover. Additional connection for desktop microphone via screw terminal. 1 aux input, speaker outputs via screw contacts, line output. Insert facility, e.g. for effect units, equalizers, feedback controllers. Input level control and output level control. 2-way tone control for the output. 48 V phantom power supply for each microphone input, to be activated individually. Limiter …

RMS-series Multi Zone 100V AmplifiersMulti-channel 100V slave amplifier with independent outputs for 100V or 4-16 Ohm speakers. Each amplifier channel has its own independent line input, which can be switched to a global auxiliary, providing the option of the same input to several of the amplifier channels if required. A paging microphone input is provided for voice alerts and a 24V mute terminal can be connected to an alarm panel for emergency evacuation override. Class D circuit design and efficient toroidal transformers have enabled a design which fits into a 1U rack-mount housing. The RMS-series amplifiers can be applied as high power slave units or equally as a fully independent zoning …

Trade in your Anthem MRX 540 7.2 Channel AV Receiver with AV.com. Its a wise decision considering the evolving nature of audio-visual technology. Trading in the Anthem MRX 540 might be an opportunity to upgrade to equipment that better suits current needs. Perhaps an advanced home theatre system or a latest generation AV receiver could be the next step. At AV.com the trade-in process is designed for convenience making it easy to switch from one piece of equipment to another. Keep in mind trading in is not merely about cost-effectiveness; its also about staying abreast with the latest in technology. Discover the simplicity and value of trading with AV.com.

Trade in your Naim SuperNAIT3 Black High-End Integrated Amplifier with AV.com. The benefits of trading in this specific product include the opportunity to declutter your audio equipment and reinvest in a newer model. The SuperNAIT3 could be a stepping stone to further audio exploration. Consider trying out integrated amplifiers from other brands or perhaps delve into power amplifiers for a more robust sonic experience. With AV.com trading in is not just about swapping equipment its about expanding your audio horizons.

Description: 1.This Amplifier is a multi-functional surround sound amplifier that's suitable for hi-fi, home cinema, or for small PA and karaoke events! 2.stereo RCA inputs and jack input can connect with all types of audio equipment - such as MP3 players, DVD players and computers, and can output the sound to a total of 5 speakers. 3.As a useful addition to its hi-fi and home cinema function, it also features two front-panel microphone inputs which allow you to entertain at PA-events, karaoke parties, or at meetings. 4.The device also offers an integrated radio receiver to tune into all your favorite radio stations. Feature : 1.5.0 speaker connections amplifier with radio 2.800W max.

Power Amplifier

Power Amplifier / Total Connected Load 1,600 W

UNIVERSAL STEREO AMPLIFIER Impedance Min:4ohm Plug Type:UK Colour:Black External Depth:255mm External Length / Height:44mm External Width:483mm Frequency Response Max:20kHz Frequency Response Min:20Hz Impedance Max:8ohm

Bose PowerShare PS404D 4.0 channels Black