Amplifiers

Digital-to-Analogue Converter

Integrated Amplifier / Stereo / 3.5mm-In / Bluetooth

Fully balanced structure,Pure sound quality The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 I/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4 Q load, THD+N

Bose FreeSpace IZA 2120-LZ 2.0 channels Black

8-core driver for unmatched detail ▶️ The D70 Pro OCTO is equipped with 8 Cirrus Logic flagship chips—CS43198. The D70 Pro OCTO also supports up to PCM768kHz/32bit and DSD512 audio decoding, which lets you experience audio with unparalleled detail and fidelity. Even the subtlest nuances come alive, creating a listening experience that's true to the original recording. Aurora UI brings new experience ▶️ The full-color screen and three touch buttons of the D70 Pro OCTO introduce a refreshing UI experience. Whether you're toggling playback information, FFT, or VU, the vibrant colors pull you in, creating a customizable visual delight. Plug and play ▶️ Compatibility is king,

【The D-class amplifier chip】 adopts the MA5332MS stereo D-class amplifier chip, and the multi chip module provides the same or even higher output power as the single chip replacement, without the need for a heat sink, reducing the space occupied by 50%. Equipped with overcurrent, over temperature and under voltage protection. We have used the electronic volume control chip NJW1194 from JRC Corporation in Japan for precise volume control and ultra-low distortion. 【MQA-CD full decoding】will fully unfold MQA music files to provide high-quality sound sources. At this playback level, you will fully hear the content created by the artist in the studio. Only the CD file size allows for high-quality music at…

Q600 Series Stereo Power Amplifiers Stereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers. 6.3mm jack or RCA inputs SPK, 6.3mm jack or 4mm post outputs Fan cooled 19" rack-mountable (2U) Power supply 230Vac, 50Hz (IEC) Frequency response 20Hz - 20kHz Input connectors 6.3mm jack, RCA (L+R) Input sensitivity 775mV, 10k Ohms S/N ratio >98dB …

In the six years since the last NAIT integrated amplifiers were released Naim Audios research and development team have worked on a range of amplifier improvements. SUPERNAIT 3 has received significant performance upgrades including a built-in phono stage making it a perfect partner for turntables as well as for streamers CD players or any other music source people want to enjoy with the signature Naim sound.SUPERNAIT 3 includes a Class A preamp output stage which doubles as a headphone amplifier and ceramic heatsink technology that minimises capacitive coupling between the chassis and  output transistors for optimum sound quality. Its inputs are each individually decoupled and hand-wired to…

Customized Thesycon driver + XMOS XU208 + ES9018K2M + OP Maximum support DSD256, PCM384kHz/32bit Orange indicator of format & sampling rate Auto on/off

The Xvive P1 Portable Phantom Power Supply is a low-noise, 12V / 48V power supply. It runs on an internal rechargeable battery and has enough power to run high-current microphones. The P1 allows you to use microphones and devices that require external power in any setup. The small size, light weight, rugged construction, and exceptionally low noise of the P1 makes it perfect for powering microphones to send a signal to mixing consoles, or any type of processor or recording unit, that does not supply phantom power. Long battery life and a bright LED battery indicator ensure that the microphone is properly powered throughout your recording session. Package Contents: Manual;Charger Made in: China Battery …

Superior Audio Quality : The DX1 features a 32-bit AK4493S DAC chip, providing stunning 120dB of dynamic range and

Signal Processor / Desktop / Number of Channels 2

Vision TC3 50w 2.0 channels Home White

A better home for electrostatic headphones: Most electrostatic headphones have great potential, but their sound performance is limited by the performance of the electrostatic headphone amplifier. When using the EHA5 electrostatic headphone amplifier, you can better unlock the performance of the headphones and unlock more auditory details. With the EHA5's appalling signal-to-noise ratio and excellent noise control, the noise that can be heard is gone. Immense Power: EHA5 reaches the astonishing 700Vrms and 2000Vp-p output swing, greatly improved from the compettion. 12V Trigger interface : EHA5 is equipped with 12V Trigger input trigger interface, which can be linked with other devices to

Use the high-end ES9038PRO D/A chip of the American ESS company: With the use of ES9311, ESS high-performance DAC dedicated power chip ES9311, the power supply noise is as low as 1uVrms, pushing the performance of ES9038PRO to the limit. USB uses XMOS XU-208, a true 32bit USB solution, supports DoP and native DSD PCM up to 768kHz, DSD supports up to DSD512. Low phase noise crystal oscillator and optimized clock processing circuit are used to greatly reduce clock jitter. All input ports support DSD transmission, coaxial, optical fiber support DoP64.Qualcomm's latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD,SBC, AAC. The specially designed discrete component linear stabilized

2-zone Mixer-amplifier + USB/SD/FM/BluetoothMixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/line and 2 line inputs with an integral USB/SD/FM player and Bluetooth receiver can be enabled independently to either of the 2 zones. Mic 1 channel has a variable override and switchable phantom power for use with condenser microphones. Designed for installations where independent paging and audio to 2 separate zones is needed.DetailsPower supply 110-230Vac, 50/60Hz (IEC)Power : output 2 x 120W rmsAudio source USB/SD/FM/BT audio playerInputs 1 x mic (XLR), 2 x mic/line (jack), 2 x line (twin RCA)Zone outputs: line 2 x RCAZone outputs: speaker 2 …