Amplifiers

2.1 Bluetooth Digital Power Amplifier Board -100w, 2 Channels. Specifications: Name:TPA3116D2 2.1 Bluetooth Digital Power Amplifier Board Chip Type:TPA3116 D2  Chip Protection: over Voltage, Under Voltage, Overheating, DC Detection and Short Circuit Operating Voltage Range: DC 11-25V (current 3-4A or More, the Proposed 19-24V / 4-5A Above), Audio Input Sensitivity: 600-800mV, Frequency Response Range: 20Hz-20KHz, Speaker Impedance: Left and Right Channel Speakers: 4-8 Ohm, Bass Speaker Impedance: 2-8 Ohm, The Maximum Output Power: 50W (left Channel) +50 W (right Channel) +100 W (subwoofer), Maximum Output Power: 100w (2 Ohm Speakers Connected) Number of Channels: 3-channels Size: 100* 10…

The Topping LA90 Discrete Class AB Power Amplifier is a flagship amp with newly developed discrete NFCA technology. It can be configured in stereo or mono mode with the ability to control its own volume and utilise two-step gain settings. Connect via the three provided balanced inputs with XLR or TRS interfaces. With a THD+N of less than 0.0001 per cent the LA90 Discrete reproduces music sources with exceptional accuracy. Its wide working range and low distortion under load make it suitable for various setups. Moreover the amplifiers high-precision CNC machined all-aluminium enclosure not only aids in the exquisite sonic detail but also offers reliable and fast heat dissipation for greater …

Double your fun with two channels of active ultra-clean gain. Provides two channels of up to +25dB of ultra-clean gain and optimal impedance loading for dynamic and ribbon mics to perform their best. Simply connect one or two dynamic or ribbon mics to the input and connect a mixer or preamp to the output. Great for two mono channels or a stereo configuration. Turns Phantom Power into gain and clarity without passing it through to your delicate ribbon mic. The Cloudlifter allows you to cut through the mix on stage with increased gain before feedback. The Cloudlifter's discrete JFET circuitry preserves the source's natural sound while keeping the direct audio path clear of transformers,

Integrated Amplifier / Stereo / Output power per channel 65 Watt / 1x S/PDIF IN (RCA Coaxial) / Max Sample Rate 384 kHz / Bitrate 32 bit / Bluetooth

ES9068AS DAC Chip--- E50 uses the latest high-performance DAC chip ES9068AS. Our excellence in design and engineering provides realistic and transparent sound quality. The sound quality is good enough for all kinds of applications--- With the help of careful design and adjustment, E50 provides a distortion as low as 0.00009% and a dynamic range of 126dB, providing you with perfect sound quality. This also makes E50 suitable for applications: high-fidelity PC-HIFI system, mobile phone/tablet OTG, CD player/turntable external DAC, digital broadcasting external DAC, TV DAC, and so on. Ultra-low jitter for USB inputs, jitter is no longer anxious--- Using CPLD to process the clock and greatly

Mini Amplifier / Stereo / Output power per channel 50 Watt / 3.5mm-In / Bluetooth

DX7 Pro+ uses ESS SABRE ES9038PRO, with 32bit Hyper-stream architecture, achieves ultra-high performance in the audio field. Each channel of the DX7 Pro+ will be arranged in parallel by 4 conventional balanced channels. This makes the performance of DX7 Pro+ even better. A brand new I/V conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip. Close to physical limits: The ability of DX7 Pro+ to restore music has reached to THD+N

Bose FreeSpace IZA 2120-HZ Black

Supports high-resolution audio: The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD

【The D-class amplifier chip】 adopts the MA5332MS stereo D-class amplifier chip, and the multi chip module provides the same or even higher output power as the single chip replacement, without the need for a heat sink, reducing the space occupied by 50%. Equipped with overcurrent, over temperature and under voltage protection. We have used the electronic volume control chip NJW1194 from JRC Corporation in Japan for precise volume control and ultra-low distortion. 【MQA-CD full decoding】will fully unfold MQA music files to provide high-quality sound sources. At this playback level, you will fully hear the content created by the artist in the studio. Only the CD file size allows for high-quality music at…

Q1000 power amplifier 2 x 500WStereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Fuse rating - T5A (240V) / T10A (110V)Power max. : 4 Ohms - 2 x 500WPower rms : 4 Ohms - 2 x 250WPower rms : 8 Ohms - 2 x 160WDimensions - 482 x 380 x 88mm (2U)Weight - 9kg

The C480 B is the pre-amp for the ultralinear series capsules, CK61, CK62, CK63, and CK69 ULS, and represents one of the quietest microphone amps ever built. The C480 B offers excellent audio quality and maximum flexibility. Its electronic circuitry coupled with a transformerless output stage assures completely linear transfer characteristics across the entire frequency range, while achieving self-noise figures close to the theoretical minimum.A specially designed output stage drives difficult loads like excessively long cables without harming the signal quality. The C480 B offers a two-step high-pass filter and two gain stages of either -10dB or +6dB. Made in: China

The Topping PA5 MKII Class D Power Amplifier adopts a fully balanced structure ensuring a clean powerful audio output. It can deliver up to 65W at eight ohms (THD+N