Amplifiers

A-30 + Wi-Fi & Bluetooth 5.0 Stereo amplifier with Multi-Room 2x35W support. Supported Formats: APE;WAV;ALAC;AAC;FLAC;MP3 Impedance: 4 Ohm;8 Ohm Depth (cm): 8.5 Inputs: 3,5 mm Jack;Micro USB WiFi: Yes USB: Yes Type: Multiroom Amplifier Width (cm): 13.1 Height (cm): 2.7 Colour: Grey Remote Control: Mobile Application;Yes Signal to Noise Ratio: 91 dB Made in: China Bluetooth: Yes LAN: Yes Net Weight (kg): 35.0 Power: 18 W;35 W Outputs: Speaker OUT Sample Rate: 192 kHz / 24 bit Streaming Platform: Amazon Music;Spotify;Napster;Deezer;Qobuz;Internet radio;Tidal Frequency Response: 20 Hz - 20 kHz

2-zone Mixer-amplifier + USB/SD/FM/BluetoothMixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/line and 2 line inputs with an integral USB/SD/FM player and Bluetooth receiver can be enabled independently to either of the 2 zones. Mic 1 channel has a variable override and switchable phantom power for use with condenser microphones. Designed for installations where independent paging and audio to 2 separate zones is needed.DetailsPower supply 110-230Vac, 50/60Hz (IEC)Power : output 2 x 120W rmsAudio source USB/SD/FM/BT audio playerInputs 1 x mic (XLR), 2 x mic/line (jack), 2 x line (twin RCA)Zone outputs: line 2 x RCAZone outputs: speaker 2 …

The Denon AVC-X6800H is a high-end 11.4 Channel 8K AV Amplifier constructed to produce exceptional audio and visuals. Designed in Japan this contemporary amp provides 140W of power through 11 channels ensuring every speaker delivers a captivating sound. Supported by AL32 technology the 13.4 channel processing offers ample expansion potential for speaker configurations including 7.1.6 or 9.1.4. For true cinematic audio the Denon AVC-X6800H features Dolby Atmos DTS:X IMAX Enhanced and Auro 3D. This provides a multi-dimensional soundstage and transforms your living room into your own private cinema. The amplifier also supports Audyssey MultEQ XT32 technology enabling a bespoke sound profile that …

2.1 Bluetooth Digital Power Amplifier Board -100w, 2 Channels. Specifications: Name:TPA3116D2 2.1 Bluetooth Digital Power Amplifier Board Chip Type:TPA3116 D2  Chip Protection: over Voltage, Under Voltage, Overheating, DC Detection and Short Circuit Operating Voltage Range: DC 11-25V (current 3-4A or More, the Proposed 19-24V / 4-5A Above), Audio Input Sensitivity: 600-800mV, Frequency Response Range: 20Hz-20KHz, Speaker Impedance: Left and Right Channel Speakers: 4-8 Ohm, Bass Speaker Impedance: 2-8 Ohm, The Maximum Output Power: 50W (left Channel) +50 W (right Channel) +100 W (subwoofer), Maximum Output Power: 100w (2 Ohm Speakers Connected) Number of Channels: 3-channels Size: 100* 10…

Headphone Amp / Max Sample Rate 768 kHz / Bitrate 32 bit / Bluetooth

Signal Splitter / Desktop / Number of Channels 2

Brand new I/V conversion： New IV conversion circuitry is designed to give you higher quality audio playback. Our circuitry uses an exclusive design that provides lower distortion and noise while occupying a smaller volume. We strive to demonstrate the full performance of our DAC chips to bring you a more superior audio experience. Bluetooth 5.1 transmission: D70 Pro SABRE supports LDAC / aptX-Adaptive I aptX HD I aptX 1 AAC I SBC audio encoding, allowing high quality audio to be transmitted wirelessly for a better sound experience. Plug and play: D70 Pro SABRE has wide compatibility and can be used on multiple operating systems, such as Windows 10, Windows 11, MAC, Linux, and

Support Native DSD512 PCM 32bit768kHz AES, USB, Optical, coaxal which all support up to 24bit192K input. USB and IIS support 32bit768k & DSD512 input. D70 use 2 x ACCUSILICON femtosecond crystal to make the Jitter lower. D70 use 2 x ACCUSILICON femtosecond crystal to make the Jitter lower.

Bose PowerMatch PM8500N 8.0 channels Performance/stage Black

Fully balanced structure, Pure sound quality ▶️ The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 II/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC ▶️ The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4Ω load, THD+N

Support Bluetooth: With LDAC, APTX/HD, SBC, AAC supported. Support MQA& MQA-CD, DSD512, LDAC. When the analog sound is converted to a digital signal,time blurring will occur, blurring transient signals over time. As a result, our ears cannot tell where a single sound comes from, the comparison between recorded music and "live performances”is unremarkable! MQA can eliminate this distortion and create a true 3D sound field, which is different from any sound you have ever heard. Uses dual high-end ES9039MPRO D/A chips from ESS Company, and uses all 8 channels, with a total of 11pcs OPA1612A op-amp. USB utilized the 3rd generation XMOS XU316, a true 32-bit USB solution, supports DOP and

Double your fun with two channels of active ultra-clean gain. Provides two channels of up to +25dB of ultra-clean gain and optimal impedance loading for dynamic and ribbon mics to perform their best. Simply connect one or two dynamic or ribbon mics to the input and connect a mixer or preamp to the output. Great for two mono channels or a stereo configuration. Turns Phantom Power into gain and clarity without passing it through to your delicate ribbon mic. The Cloudlifter allows you to cut through the mix on stage with increased gain before feedback. The Cloudlifter's discrete JFET circuitry preserves the source's natural sound while keeping the direct audio path clear of transformers,

V-122 Dual Zone 100V Mixer-Amplifier 2 x 120WFully-featured mixer-amplifier with class-D amplifier section, delivering 100V or low impedance output to 2 independant public address zones. Featuring a built-in audio player with Bluetooth® and DAB+/FM receiver, along with a USB/SD mp3 player for flexible and convenient playback of music or spoken information. Inputs include 3 balanced mic/line channels, which are live to both zones at all times, with switchable phantom power and selectable priority for channel 1. Additionally, a rotary selector for each zone can switch between 2 unbalanced line inputs, an auxiliary line input or the internal audio player section. Speaker connections are provided …

The JBL MA710HP 7.2 Channel 8K High Performance AV Receiver transforms your home cinema experience with stunning 8K/60Hz and 4K/120Hz resolution and up to 7.2 channels of surround sound. As the first High-Performance model in the JBL MA series it features a low-noise Class D 125W RMS power output and Dirac Live Ready technology for advanced room correction ensuring optimal acoustics in any listening environment.Immerse yourself in Dolby Atmos and DTS decoding for a soundscape that truly maximises your speakers potential with lifelike spatial audio in a three-dimensional space. Stay at the forefront of home cinema technology with six HDMI inputs (three 8K and three 4K) and eARC support for seamless …

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases (or decreases) the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 75 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.