Batteries for Drones & RC models

Features: - Small DC motor 1 to 6V - Runs on as little as 1 Volts, 6 Volts Maximum. - Can be speed controlled with PWM (Pulse Width Modulation) by for Arduino.A power transistor must be used to control the motor; for arduino pins do not have enough power to run this motor directly. - Current at 5V: 400 mA no load, 1.7min stalled (Do not stall for more than a few seconds at 5V). When running from an external power supply, can supply 5V at 2A which can run one of these motors. Otherwise a separate 5V supply is needed. Runs well from two AA batteries. Type: DC Small Motor Material: Plastic Voltage: 1-6v 3v speed: 17000-18000RPM Shaft length: 8mm Shaft

Label:Yes Material: Plastic Product Name: 550/390 gear box gear Use: Vehicles & Remote Control Toys Color: White Size: as picture Package includes: 1 set 390/550 complete gearboxes Notes Due to manual measurement or shooting scenes, there may be some deviation or slight color difference.

This swashplate set is designed for V950 RC helicopter, featuring high quality?and durable performance, which is the best choice for you to enjoy more flying joys. Feature: Replacement part designed for the WLtoys V950 RC helicopter. Lightweight and easy to install. High quality and durability in use. 100% brand new. Specifications: Item type: Swashplate set Material: Plastic and Metal Suitable for: WLtoys V950 RC Helicopter Package information: Package size: 5 * 5 * 2cm / 2 * 2 * 0.8in Package weight: 9g There might be some deviation due to manual measurement. Package List: 1 * Swashplate set

Item Name: MG995 Servo Operating Speed: (4.8V No Load) 0.17sec 60 Degrees Operating Speed: (6.0V No Load) 0.13sec 60 Degrees Stall Torque: (4.8V) (13kgcm) (180ozin.) Stall Torque: (6.0V) (15kgcm) (208ozin.) Temperature Range: -30℃ - 60℃ Dead Band Width: 4usec Operation Voltage: 3.5 - 8.4Volts Dimension: 40.7mm x 19.7mm x 42.9mm/1.60" x 0.78" x 1.69" (Approx.) Notes: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Package Includes: 1 x MG995 Servo with Accessories

Features: This is a great electric motor used for children\'s cars. The middle gear is made of metal which is more sturdy and . It will make quite low noise and more wear-resistant. There are 4 types for different voltage and speed that you can choose as need. It will be a great replacement part for your broken or old . Specifications: Type(Optional): 6V 18000RPM, 12V 12000RPM, 12V 16000RPM, 12V 20000RPM, Total length: Approx. 16.5cm / 6.5inch Hole Diameter: 1cm / 0.39in Quantity: 1 Weight: approx. 270-289g Package Included: 1 x Electric Motor Label: Yes

Model Number: ERS-385S-2270-57 Product Number: ERS-385S-2270-57 Model: 385 Motor Color: See Picture Material: Metal Voltage Range: 3-36V Rated Voltage: DC 12V No-load Current: 3.9A Rated Power: 6.13W No-load Speed: 9800rpm Rated Torque: 72 NM Application: - Widely used for children riding toy bicycle motor, remote control ship motor, high-grade toy motor, hair dryer motor, electric tool motor. - Product performance is stable, low noise, high torque. Package Weight: 65.0 G / 2.29 Ounces Package Dimensions (L*W*H): 57*28*28 MM / 2.24*1.10*1.10 Inches Retail Packaging: No, No Packing Package Include: 1 x DC Motor

Replacement aluminum alloy servo arm designed for Wltoys K989 A999 A979 L969 RC car. Great power system part to enjoy rc playing funny! Features:? Suit for Wltoys K989 A999 A979 L969?RC car. Lightweight aluminum alloy material, durable and designed for long-term performance. Novel design, upgraded appearance and exquisite workmanship, strong arm to transmit the power of servo to make the car steering and climbing easily. High Wear-resistant and excellent durability. Compared to other brand one definitely worth what you bought. Specifications: Item Name: Servo Arm Color: Blue Main Material: Aluminum alloy Suitable for: Wltoys K989 A999 A979 L969? Package information: Package size: 8*6*1cm Package …

Features: RC car metal shovel, rescue tools, decorative parts of the car. Increase the simulation degree of the vehicle. Replacement for Traxxas Hsp Redcat Rc4wd Tamiya Axial scx10 D90 Hpi RC car. Good workmanship and good material. Specifications: Item: RC Car Shovel Main Material: Plastic Size: 12*2.8cm Package Size: 13*5*1cm Package Weight: 9g Plastic Package Note: * There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. Packing List: 1* Shove

The shell clips pin is used to fix the RC car shell and body, suitable for most 1/10 RC car models. Features: [Fix Car Shell]: The clips pin can well fix the car shell and protect the interior components of the RC car. As soon as it is fixed, the car shell is firmly attached to the car body, and you never worry about your car will be damaged. [Easy to Install]: Easy to install and remove, ideal for RC car DIY lovers. [Unique Design]: Tripod shape handle design, when you want to unload the car shell, this handle design won't hurt your hand. It is very convenient and simple to unload the car shell. [Suitable for]: Compatible with Traxxas Hsp Redcat Rc4wd Tamiya Axial scx10 D90 Hpi 1/10 RC car,…

Features: [Fix Car Shell]: The clips pin can well fix the car shell and protect the interior components of the RC car. [Protect RC Car]: As soon as it is fixed, the car shell is firmly attached to the car body, and you never worry about your car will be damaged. [Easy to Install]: Easy to install and remove, ideal for RC car DIY lovers. [Suitable for]: Compatible with ARRMA Axial SCX10 Traxxas TRX4 D90 Redcat GEN8 rc car, the perfect choice for fix car shells and the car body. Easy to install and remove, ideal for RC car DIY lovers. Specifications : Item: Body Shell Clips Pin Color Optional: Black/Blue/Red/Yellow/Orange/Green Quantity: 4pcs Notice: * There could be some deviations due to manual …

Includes 5 pins for motor shaft diameter 0.9mm*1,1.75mm*2,1.9mm*1,2.8mm*1, suitable for Mini motors of rc helicopter, plane or servo. Choose the thimble you need to pull,plug in the rotation lever,tighten the screws (Note:There are thimbles with platform, screws should not too tight) Install the gear lever into rotation bracket and fitted swim boards Snapping the motor into the swimming board, and move to pull the motor shaft aligned thimble Rotates active lever as clockwise, pull out the motor gear. Color: silver Material: Aluminum alloy Package Contents: 1 * Motor Pinion Gear Puller Remover Tools Set Only the above package content, other products are not included. Note: Light shooting and

Description: Material: Electrical components Color: See pictures Leaf Paddle Dia.: 60mm Motor Dia.: 25mm Motor Length: 31mm Shaft Dia.r: 2mm Power Voltage: 0-20V Voltage: 6-9V Speed: 200~6000rpm Features: 12V Micro wind turbines. The motor can be done ordinary power motor, you can also plug blades in wind driven generator motor do. Quantity: 1Pc Note: No retail package. Transition: 1cm=10mm=0.39inch Please allow 1-2cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 3Pcs x Diode 1Pc x Plug 1Pc x Generator 1Pc x Four Leaf

These Metal Shock Mount Lift Kit is suitable for 1:10 Traxxas HSP Redcat Tamiya RC4WD Axial HPI RC Car Off-road Crawler. With its terrific quality and performance, it can satisfy the needs of the racers. The best choice for your RC car. Features: Fine workmanship and high quality material Metal Shock Mount for both the front and rear axle The shock mount can adjust the height and angle of the shock absorber Stainless steel mounting hardware included Suit for 1:10 Traxxas HSP Redcat Tamiya RC4WD RC Car Off-road Crawler Specifications: Item name: Metal Shock Mount Thickness: About 4mm Hex length: About 5cm Hole diameter: About 3mm Quantity: 4Pcs Suit for: 1:10 RC Crawler Traxxas HSP Redcat Weight: …

Features: Metal sand ladder recovery board, decorative parts of the car. Increase the simulation degree of the vehicle. Replacement for Traxxas Hsp Redcat Rc4wd Tamiya Axial? scx10 D90 Hpi RC car. Good workmanship and good material. If there are any problems, please contact our store in time. Specifications: Item: Metal Sand Ladder Recovery Board Main Material: Metal Color: Silver Size: 12*4cm Package Size: 12*5*1cm Package Weight: 31g Plastic Package Note: * Please remove the blue film before use. * There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. Packing List: 2* Recovery Board

Replacement differential for Wltoys XK 144001 rc car 60km/h high speed 1/14 2.4GHz rc buggy, efficiently allowing the car do difficult and perfect turning and rc driving. Features:? Suit for Wltoys XK 144001 RC car. Zinc alloy material, durable and designed for long-term performance. Exquisite workmanship, quality assured, allowing the car to turn and drive in a perfect curve. High Wear-resistant and excellent durability. Compared to other brand one definitely worth what you bought. We are glad to provide the best product and the best services to our customers. Any question, please contact us without hesitation. Specifications: Item Name: Differential Main Material: Zinc alloy Suitable for: …

This is a set of professional and practical LED lights for 1/10 1/8 RC cars, which includes 8pcs LEDs: 2pcs white LEDs, 2pcs red LEDs and 4pcs yellow LEDs. They are powered by the receiver directly, very convenient to use. Features: Durable hard metal lampshade. LED size: 8mm white LED, 8mm red LED and 4mm yellow LED. Directly powered by the receiver, for convenient to operate. Including 8pcs LEDs: 2pcs white LEDs + 2pcs red LEDs + 4pcs yellow LEDs. Suitable for 1/10 1/8 Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Car. With stable performance, it is practical and durable. Specification: Item name: 8 LED Light Kits Material: Plastic & metal Light color: 2 White, 2 Red, 4 Yellow Using …

This motor heatsink cover with a cooling fan is compatible with WLtoys A959-B A979-B 144001 124019. Features: Size: Inner diameter: 3.5cm; Height: 4cm. Made in the high-quality alloy. It's durable. Fitting 540 550 brushed motors and 3650 brushless motors. Compatible with ?Wltoys A959-B A979-B 144001 124019 1/12 1/14 RC Car. Always keep your motor at the right temperature to make the motor work efficiently. Specifications: Name: Motor Heatsink Cover with a Cooling Fan Material: aluminum alloy+ plastics Color: blue/purple/red(optional) Size: Inner diameter: 3.6cm Height: 4cm Package information: Size: 10*8*4CM Weight: 22g Package List: 1* Motor Heatsink Cover with a Cooling Fan Note: * There …

Specification: Product Name DC Coreless Motor Rated Voltage DC 3.7V Current 90-100MA Speed 48000RPM Shaft Size 0.8 x 4mm/ 0.03" x 0.16"(D*L) Body Size 6 x 14mm/ 0.24" x 0.55" (D*H) Propeller Size 4.5 x 0.8cm/1.8" x 0.3"(L*W) Wire Length 6.2cm/2.4" Package 2 x DC Coreless Motor Description: Cylindrical shape and with 0.8mm diameter shaft, Permanent Magnet, 2 wire connectors. Coreless Motor Micro-motor for Model Aircraft Helicopter and A Variety of Electric Drive Products.

Charger UK Plug 100V-240V for Flytec 2011-5 1.5kg Loading Remote Control Fishing Bait Boat Features: 100% brand new Perfect for Flytec 2011-5 1.5kg Loading Remote Control Fishing Bait Boat Fast charge, protect the battery Light weight and portable to carry Made of high quality plastic Specification: Product name: Charger Main Material: Plastic Input voltage: AC 100V-240V Output: 8.4V/1A Color: Black Plug: UK Suitable: Flytec 2011-5 Fishing Bait Boat Package Information: Package size: 9.5 * 7.2 * 2.8cm / 3.7 * 2.8 * 1.1in Package weight: 67g / 2.4oz White box package Package List: 1 * Charger UK Plug

Features: Replacement motor for automobile door locks and various other small motors used for electromechanical functions in cars Can also be used wherever a small, powerful DC motor is requested such as robotic and hobbyist applications The following vehicles are a representative list of some models which contain this motor. Lexus IS 300, LS 400, GS 400, GS 300, RX 300 Acura T1, E1 Ford, AU, AUII, AUIII Torneo, CF4, Accord, CF4, SIR/CL1, Euro R CRV, CRV Mazda MPV, Familia, Protege Renault Clio II Landcruiser, Sienna, Corolla Specifications: Shaft: round - 2mm diameter x 9mm length Canister: 24.2 mm diameter x 30.5 mm long Overall Length: 42 mm (Tip to Tail) Rated speed:12500rpm Quantity:

This is a set of professional and practical LED lights for 1/10 1/8 RC cars, which includes 8pcs LEDs: 2pcs white LEDs, 2pcs red LEDs and 4pcs yellow LEDs. They are powered by the receiver directly, very convenient to use. Features: Durable hard metal lampshade. LED size: 5mm white, red LED and yellow LED. Directly powered by the receiver, for convenient to operate. Including 8pcs LEDs: 2pcs white LEDs + 2pcs red LEDs + 4pcs yellow LEDs. Suitable for 1/10 1/8 Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Car. With stable performance, it is practical and durable. Specification: Item name: 8 LED Light Kits Material: Plastic & metal Light color: 2 White, 2 Red, 4 Yellow Using method: …

Specification: Model: 751517 Type: Lithium battery Capacity: 100mAh Rechargeable: YES Charging Voltage: 4.2V Rated Voltage: 3.7V Working Temperature: -10Celsius~50Celsius Dimensions: As picture show Feature: Sufficient battery capacity, support for testing and testing, battery life,Strong force, stable performance, durable; Six intelligent self-protection,Components such as intelligent control IC and MOS are all first-line brands such as Depu Weiguo to ensure the stable charging and discharging performance of the lithium battery, safe and reliable, and safe to use; High and low temperature resistance, wide range of temperature adaptation; Using environmentally friendly materials, green and

This USB charging cable is exclusively customized for Wltoys A959, A959-A, A959-B, A979-B,12428, etc. It is light and chic, very convenient. If you want to one more charging cable for the occasional need of RC car battery charging, buy this one will be you best choice! Features: 7.4V lithium battery charging cable. Output DC 7.4V2000mA,XH-3P port. Uniquely designed & manufactured USB charging cable. Suitable for Wltoys A959, A959-A, A959-B, A979-B,12428, etc. Specifications: Item: 7.4V lithium battery charging cable Input: DC 5V 0.5-2.5A Output: DC 7.4V2000mA Port: XH-3P Suitable for: Wltoys A959, A959-A, A959-B, A979-B,12428, etc Package Information: Package size: 8*4*2cm Package weight: …

100% brand new and high quality Instructions: Apply: Remote control aircraft remote control car remote control ship 1. When the charger is connected to the 220V power supply, the charger is not displayed. 2. When the Ni-Cd/Ni-MH rechargeable battery pack is fully charged, the indicator light is slightly dimmed and charging stops. Features: The intelligent load identification chip blocks excessive current and voltage from entering and protects the device from damage. Intelligent IC technology provides overload protection and short-circuit protection and ensures safety during charging. Automatically adapt to USB input power, quickly and stably recharge the battery. As long as the battery