Amplifiers

【High Performance DAC AMP Chip】: The SMSL AO300 uses the MA5332MS power amplifier chip, the CS43131 decoding headphone amplifier chip, and the NJW1194 Volume Control Chip. These cutting-edge chips have been designed to deliver exceptional audio performance, with minimum distortion and interference. It supports MQA and MQA-CD decoding and restores the sound of the recording studio. 【2.1 Channel Audio Amplifier System】: The stereo amplifier features a 2.1-channel active audio system with subwoofer output, delivering an output power of 165W x 165W. This system has been carefully designed to provide an immersive audio experience with deep bass and rich sound quality. Bluetooth 5.1 also

Headphone Amplifier / Number of Channels 1

Superior Audio Quality : The fully balanced class D amplifier design with dual MA12070 chips and low THD+N levels provide pristine, distortion-free audio even at high volumes. High Power Output : With the ability to output 80W x 2 at 4ohm load and 65W x 2 at 1% THD+N, the PA3s has enough power to drive any bookshelf or floor-standing speakers. Versatile Inputs : The TRS balanced and RCA single-ended inputs eliminate ground loop problems, making it easy to connect to a range of audio sources. The front panel button allows easy switching between inputs. Comfortable Listening Experience : With the lowest THD+N in the range of 10-20W output, the PA3s offers an optimal listening

Amplifiers for installations

Supplied with 35 m loop wire for setting up an induction loop, SCART adapter, PSU Integrated alarm signal can be switched on additionally Dynamic compressor. 2-way tone control Adjustable input sensitivity for line and microphone LEDs for power, signal/PEAK and loop current

D10s is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 D10s uses XMOS XU208 for USB interface and uses customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native. Even some USB port support power after PC has shut down, D10s still will synchronously power on /off with PC. D10s can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night. D10s has OP amp socket, DIYer could change the OP amp to get different sound.

The NuPrime Omnia A300SE is a high-performance integrated amplifier with multi-room and hi-resolution capabilities. Inside it is a powerful Class-D amplifier a 64-bit quad-core Arm Cortex-A53 processor and NuPrimes proprietary SRC chip to deliver high-resolution wireless streaming. The inclusion of the Cirrus Logic CS43131 DAC along with other audiophile-grade components ensures minimal noise and distortion. With Bluetooth 5.0 aptX HD and Wi-Fi support stream in 24-bit quality for convenience without compromise. A standout feature is the onboard low-noise ground-centred headphone amplifier offering proprietary AC impedance detection to support headphone fingerprinting. This guarantees a consistent …

Dual channel level converter. The CLEANBoxPro provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and portable unit. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used. Each section has stereo level controls to optimize signal levels. An LED indicator lights when power is applied. Frequency response: 20 Hz - 20 kHz. Comes with external power supply. Dimensions: 47 x 117 x 109 mm. Weight: 0,5 kg. Made in: China

Complete AD7606 application circuit module.The on-board boost circuit provides 5V analog through LDO, eliminating 5V supply.On board ADR421 voltage reference, internal/external reference can be configured.Comply with the input protection resistance recommended by AD7606 datasheet Page 22.Material: PCBcolour: As shownPackage Contents:1 x AD7606 data acquisition synchronous sampling moduleOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Supports high-resolution audio▶ The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD

DI Box / Desktop / Number of Channels 2

Power Amplifier / Number of Channels 2

Fully balanced ▶️TOPPING PA7 Plus utilize a newClass D amplifier circuit with a variety of exclusive optimization techniques, which has powerful low distortion performance and power output. These technologies ensure a clearer, cleaner, deeper sound without any background noise. In addition, the balanced structure is able to reduce noise during transmission, thus enabling better performance of the audio source and avoiding wasted performance during transmission. Distortion is as outstanding as DAC ▶️ The distortion performance of PA7 Plus is matching good performing DACs. The distortion stayed extremely low before clipping. This ensures consistent listening pleasure across volume

The counterattack of discrete amplifier: LA90 Discrete, an unprecedented performance benchmark will bring you a breathtaking listening experience. The newly developed discrete NFCA power amplifier reaches a new level of pristine sound and accuracy. The unprecedented level of performance will bring you the absolute amaze on the sound quality. You will experience the darkest background you ever experienced with jaw dropping clarity. Rock solid : The LA90 Discrete's housing is a high-precision CNC machined all-aluminum enclosure that provides exquisite detail and rugged protection. Passive cooling on both sides provides reliable and fast heat dissipation for the LA90 Discrete's amplifier

German Infineon's New Silicon Carbide Amplifier Chip Mini handy Design, More Flexible. High quality gold-plated audio connectors Whole aluminum alloy CNC shell. More generous and better heat dissipation Electronic volume control. Eliminate the noise caused by potentiometer. Preset multiple EQ sound mode

D-Series Class-D Power AmplifiersStereo power amplifier in a lightweight 1U rack-mountable housing. Class-D circuit architecture efficiently converts power into impactful audio for driving medium to large speaker cabinets. Custom cool guide technology ensures consistent and reliable operation and an inbuilt limiter circuit engages at peak output to prevent speaker overload. Options for parallel and bridge mode with selectable input levels and 75Hz low cut filter allow for different confgurations to handle even the most demanding of sound reinforcement duties.DetailsPower supply 220-240Vac, 50/60Hz (IEC)Modes Stereo, Parallel (mono), Bridge (mono)Input sensitivity 0.775V - 1.0V - 1.44V switchableLow-cut …

Compatible with DSD256 and PCM384 - D10s is compatible with 16-32bit/44.1-384kHz and DSD64 - DSD256(support both Dop and Native) XMOS XU208 and Customized Driver - D10s use XMOS XU208 for USB interface and use customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.And use ESS ES9038Q2M to make THD+N as low as 0.0002%@1kHz Automatic Power On/Off - Although the USB port support power after PC has shutdown,D10s still will synchronously power on/off with PC Replaceable OP - It has OP amp socket,DIYer could change the OP amp to get different sound.Notice:D10's electrical parameters will change if use other OP Multiple Applications …