Amplifiers

The JBL MA710 8K AV Receiver is designed for 7.2 channel speaker systems making it an ideal centrepiece for a high-end home cinema. The Class D amplifier delivers low-noise powerful sound at 110W per channel at eight ohms. Enjoy a multi-dimensional soundstage with Dolby Atmos and DTS decoding bringing cinema magic to your living room. For gamers the receiver supports Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) ensuring reduced screen tearing and input lag. These features benefits of HDMI 2.1 technology provide a competitive edge and immersive gaming experience. The MA710 includes six HDMI inputs three for 8K/60Hz and three for 4K/120Hz while the eARC output supports high-quality …

Two-channel amplifier with a power of 2 x 50 W with practical dimensions of 19 x 28 cm. Thoughtful simple solution, ideal for schools, conference rooms, bars and restaurants. Thanks to its sound qualities, it will also appeal to a number of beginning Hi-Fi fans. There are two multifunctional controls on the front panel and a backlit display is located under the black acrylic. In the active state, the display subtly illuminates the black area, in the off state, the forehead is pure black, or with a light point indicating the standby mode. The aluminum bottom of the casing is also a heat sink that dissipates heat from electrical circuits. The internal power supply is provided by a powerful toroidal …

The Topping PA7 Plus Class D Power Amplifier is a step up from the PA7 allowing for a more premium audio output. Equipped with two channels this amplifier delivers up to 165W of power to an eight-ohm load; primed and ready to boost most stereo setups. At the heart of the PA7 Plus is the Class D circuit design chosen by Topping for its efficiency and superior performance at this scale. This fully balanced structure reduces noise during transmission and achieves THD+N levels below 0.0003 per cent. The result is a clean and powerful audio output that will elevate your favourite songs. With a dynamic range of 124dB and a frequency response of 20Hz-40kHz the PA7 Plus is suitable for a wide range …

Double your fun with two channels of active ultra-clean gain. Provides two channels of up to +25dB of ultra-clean gain and optimal impedance loading for dynamic and ribbon mics to perform their best. Simply connect one or two dynamic or ribbon mics to the input and connect a mixer or preamp to the output. Great for two mono channels or a stereo configuration. Turns Phantom Power into gain and clarity without passing it through to your delicate ribbon mic. The Cloudlifter allows you to cut through the mix on stage with increased gain before feedback. The Cloudlifter's discrete JFET circuitry preserves the source's natural sound while keeping the direct audio path clear of transformers,

KAD-2BT Digital stereo amplifier with Bluetooth® This compact digital amplifier has three selectable stereo inputs, two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume, tone and echo effects are adjustable through rotary controls. Master Volume, Treble and Bass rotaries control tone and overall output. This amp also features built-in media player, Bluetooth connectivity and FM receiver. A multi-functional amplifier suitable for both domestic and commercial use. Efficient Class D digital amplifier A high output power of 55W max. per side 3.5mm stereo line input on the front panel 2 stereo line inputs on RCA Spring clip speaker output terminals 2 x 6…

Power Amplifier / Number of Channels 2

CNC aluminum shell - Nice appearance,also greatly improved the heat dissipation capacity Chassis Temperature Display - With chassis temperature display, better control sound quality

2xMA12070 Fully balanced Class D amplifier ：Each channel of PA3s uses one MA12070 Class D power amplifier chip. This allows separation in layout improving performance and reducing crosstalk. The power is shared across two chips, the heat dissipation is also halved for each chip, improving reliability and extending the lifespan of the product. High output power ：PA3s could output 80W x2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1%，output power will be 65W x2 at 4ohm load. The output power is enough to drive any bookshelf speakers and even some floor speakers. Balanced + Single- ended inputs ：PA3s provides TRS balanced input and RCA single: end- ed input. The u use of

Integrated Amplifier / Stereo / Output power per channel 25 Watt / 3.5mm-In / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

High quality subwoofer power amplifier board Audiophile cinema subwoofer amplifier board Rated power 200W, maximum power 300W High-efficiency half-bridge precision power supply + high-power MOS tube output With rated power 200W output. It adopts high-efficiency half-bridge power supply, with 120V and 230V transfer switches for global use. And power supply margin is quite , and ripple is lower than that of transformer power supply. The power amplifier output also uses MOS high-current tubes output, which achieves 1% distortion of 200W, and the control is . The front stage adopts the current high- in the subwoofer industry, using dynamic EQ algorithm, high speed, low diving, and high control.…

Compatible with DSD256 and PCM384 - D10s is compatible with 16-32bit/44.1-384kHz and DSD64 - DSD256(support both Dop and Native) XMOS XU208 and Customized Driver - D10s use XMOS XU208 for USB interface and use customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.And use ESS ES9038Q2M to make THD+N as low as 0.0002%@1kHz Automatic Power On/Off - Although the USB port support power after PC has shutdown,D10s still will synchronously power on/off with PC Replaceable OP - It has OP amp socket,DIYer could change the OP amp to get different sound.Notice:D10's electrical parameters will change if use other OP Multiple Applications …

Stereo full amplifier 2 x 60 watts DAC mode

Trade in your Naim NAIT XS 3 High End Integrated Amplifier with AV.com. This amplifier praised for its big bold and dynamic sound excellent imaging and detail can be your ticket to exploring new audio equipment. You might want to trade this in to experience other integrated amplifiers that offer different sound signatures or feature sets. For example you could explore other brands renowned for their unique audio characteristics or delve into the world of valve amplifiers for a change of pace. Trading in with AV.com is all about discovering and experiencing the vast world of high-end audio.

CB-15BT Bass Amplifier with Bluetooth®Compact combo amplifier for bass guitar with 3-band EQ and built-in Bluetooth receiver. Built into a sturdy closed-back cabinet with a 15W amplifier section driving a custom voiced driver for low end that can reproduce the lower frequencies from a bass instrument. An ideal practice or recording amplifier for all types of bass guitars.DetailsPower supply 230Vac, 50Hz (IEC)Output power rms 15WConnections Guitar in, Headphones out Speaker size 165mmØ (6.5")EQ controls Bass, Mid, TrebleDimensions 270 x 260 x 165mmWeight 4.04kg

Stageman II AC-60 Acoustic AmplifierStageman II AC-60 is a complete guitar and vocal amplifier for acoustic performers. A 60W amplifier drives a 6.5" woofer paired with a 1" tweeter for a powerful full-range output. Independent channels for guitar and microphone are conveniently positioned on the top panel for the angled cabinet, each with separate controls for gain, 3-band EQ, effects and reverb. Deeper editing and extra features like IR (impulse response) profiles are accessible via Bluetooth® using the free-to-download Stageman mobile app. Bluetooth can also be used for audio streaming of tracks to play along with. An internal looper, drum machine and effects can be edited in the Stageman a…

Fully balanced ▶ TOPPING PA7 utilize a newClass D amplifier circuit with a variety of exclusive optimization techniques, which has powerful low distortion performance and power output. These technologies ensure a clearer, cleaner, deeper sound without any background noise. In addition, the balanced structure is able to reduce noise during transmission, thus enabling better performance of the audio source and avoiding wasted performance during transmission. Distortion is as outstanding as DAC ▶️ The distortion performance of PA7 is matching good performing DACs. The distortion stayed extremely low before clipping. This ensures consistent listening pleasure across volume levels.

Ultra-low noise ,0.4 dB at 1.95 GHz High gain at 1.95 GHz,20 dB gain High linearity,+35 dBm output IP3 High input power robustness,+22 dBm CW Stable performance Buying Tips: The battery-free version requires -Tee power supply. Some devices have their own power supply function This product is a high linearity, ultra-low noise gain block amplifier type:gain amplifier Power supply:5V 70ma Frequency range:100K-6GHz 50 ohm input/output Connector:SMA female Weight:46g Power Suplly:B:3.7V 300mAH battery(no battery) Colour:As Shown Material:Metal Size:45x45x18.5mm(excluding joints) Package Contents: 1 * gain amplifier 1 * cbale Only the above package content, other products are not included. Note: Light …