Amplifiers

Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier.
Type: Preamp
Package Contents: Manual
Number …

The Radial ProAV1 and ProAV2 are passive direct boxes specifically developed with the audio-video integrator in mind. The ProAV1 features a variety of stereo inputs that are summed mono via a resistive mixer, greatly simplifying signal management. The ProAV2 delivers two discrete channels where full stereo functionality is required. To eliminate the need for various adaptors, both units are equipped with a 'Swiss Army' array of connectivity options including 1/4" inputs for instruments, RCA and 3.5mm (1/8") connectors for CD players, iPods, video decks and computers. The ProAV1 also features a female XLR input for interfacing equipment with +4dB professional signal levels. The front panel connectors …

Hi-Fi stereo amplifier. Bluetooth receiver. USB/MP3 player. FM radio. Echo microphone inputs. Digital audio input to connect to a TV. Aluminium panel. Remote control for player. POWER: 230 V AC, 350 W, RESPONSE: 20-20,000 Hz, S/N RATIO: >85 dB, DISTORTION: Harmonic: < 0.5% at 1 kHz, INPUTS: 3 stereo aux: DVD/AUX/CD, 2 x RCA, 17,000 Ω 300 mV RMS, 1 stereo aux, 3.5 mm jack, 15,000 Ω 300 mV RMS on front panel, 1 digital audio, TOSLINK and RCA, 2 balanced mics, 6.3 mm jack, 900 Ω 9 mV RMS, OUTPUTS: Speakers: Main L/R, 4-16 Ω screw or banana terminals, PROTECTION: Temperature, short circuit and overload
Package Contents: Manual;Power Cable
Depth (cm): 27.6
Type: Amplifier
Inputs: Jack 3,5 mm;Jack 6,3 mm (MIC/Line);RCA;AUX
Colour: Black
USB: Yes
Made in: China
Impedance: 16 Ohm
EQ: No
Frequency Range: 20 Hz - 20 kHz
Height (cm): 9.2
Power: 120 W
Width (cm): 33.0
Bluetooth: Yes
WiFi: No
Power Supply: 230V
SD Slot: No
Microphone Input: Yes
Radio: FM
MP3 / Line In: Yes
Signal to Noise Ratio: 70 dB
Net Weight (kg): 4.2
Battery Operation: …

OFFER: Buy any FiiO DAP (M11S, M11 Plus, M15S, M17, R7) and SAVE £50 when you purchase FiiO's SP3 Speakers in the same basket using voucher code SP3SAVE FiiO R7 is the brand’s first-ever desktop digital audio player equipped with a high-performance ESS Sabre DAC chipset and high-power THX-788+ desktop-grade amplification chipset. It brings you the perfect combination of input and output options allowing you to use it independently or use it with other devices on your desktop chain. FiiO R7 supports high-resolution PCM and native DSD audio signal decoding. With Qualcomm’s 8-core Snapdragon 660 SoC chipset and 4 GB of RAM, R7 boasts open Android 10 OS with support for countless …

The i9-XR is one of the first wave of products heralding the new XR series of Cyrus components. The familiar Cyrus precision die-cast case is the same but everything else has changed. With ground-up engineering inside an all-new phantom black paint finish touch sensitive controls and a higher resolution display that is customisable for brightness contrast and polarity the high-quality finish of XR makes a strong statement.

Switch: control a pair of speakers either from a stereo amplifier or a surround amplifier - easy to switch without cables.
Multifunctional: the switch also offers the possibility to switch to 2 different pairs of boxes with 2 amplifiers.
Safe: The high-quality rotary switch with zero position protects the connected devices - deep high-quality banana sockets provide the cables with a secure grip.
Sound: thanks to the raised cable cross section, the AMP-S Pro offers optimal signal transmission without distorting the sound of the system.
Quality: the AMP-S Pro has a sturdy metal housing and a 4 mm thick aluminium front plate in a brushed finish.

Jaw-dropping, room-filling sound with advanced acoustics powered by computational audio. Seamless integration with Spark App. Bluetooth speaker, audio interface, rechargeable battery and headphone/line out.Play whenever and wherever you feel like it with this app-supercharged tiny beast. We’re talking seamless integration with the Spark App chock full of amps, pedals, Auto Chords, Smart Jam, 50,000 tones on the cloud, and so much more.It’s easy to create your own tones, or download over 50,000 tones from the ToneCloud community. Get chords for millions of songs. Use AI-powered Smart Jam to learn and jam along with you, and much more. Spark GO comes stocked with 33 amps and 43 effects …

Collaboratively designed by the EVH team and led by renowned amp engineer, James Brown, the 5150® Iconic® Series 60-watt 2x12 combo is powered by two 6L6 power tubes and voiced by a complex, multi-stage hybrid preamp section anchored by a pair of ECC83 tubes providing all the fire power the modern guitarist needs. The cabinet features special internal plywood baffling for tight and increased bass response, and houses a pair of custom-designed EVH 12” Celestion® speakers voiced specifically for this preamp circuit, so that the pristine cleans and searing high gain tones are tight, clear and articulate.This combo features two channels with an extra voicing on each for even more …