Amplifiers

The i9-XR is one of the first wave of products heralding the new XR series of Cyrus components. The familiar Cyrus precision die-cast case is the same but everything else has changed. With ground-up engineering inside an all-new phantom black paint finish touch sensitive controls and a higher resolution display that is customisable for brightness contrast and polarity the high-quality finish of XR makes a strong statement.

Excellent signal/noise ratio, lowest harmonic distortions and wide gain range make the QuadMic II a first choice for superior studio recordings. QuadMic II is battery powerable and thus excellent for remote applications. Each of the 4 channels features balanced microphone and line inputs with Neutrik XLR/TRS combo jacks, switchable 48 V phantom power, phase reversal and a low cut filter. All channels are also equipped with LEDs for signal presence, clip state, and activated phantom power. The input amplification can be set from 6 to 60 dB. The balanced line level output signals are provided on the rear of the unit as four 6.3 mm (1/4") TRS jacks. A maximum balanced and unbalanced output level …

When designing the TB12 Tone Beast Black our goal was to make a microphone preamplifier affordable and jam packed full of options, without compromising the quality and design parameters that make this type of microphone preamplifier so desirable.
With top notch CineMag transformers and multiple discrete signal paths, it's hard to beat the Tone Beast's big, bold, fully-professional sound at this price. Have no fear of hurting the Beast, you can push it very hard into full-on distortion if you wish, and these can sound quite nice on electric guitar, bass or anything else that likes some grit.
Power Supply: 240V
Made in: China
Microphone Input: 2
Rackmountable: Yes
USB: No
Phantom Power: Yes
Compressor: …

Collaboratively designed by the EVH team and led by renowned amp engineer, James Brown, the 5150® Iconic® Series 15-watt 1x10 combo has a 6L6 power tube voiced by a complex, multi-stage hybrid preamp section anchored by a pair of ECC83 tubes, providing all the muscle you need for a modern-day practice amp. The cabinet features special internal plywood baffling for tight and increased bass response, and houses a custom-designed EVH 10” Celestion® speaker voiced specifically for this preamp circuit, so that the pristine cleans and searing high gain tones are tight, clear and articulate.Punching above its weight, this combo features two channels with an extra voicing on each for …

1-channel, 2-band tube equalizer with 20Hz - 50kHz, +/- 1 db frequency range. Input Impedance: 600 Ohm. Low Frequency Boost: 20, 30, 60, 100, 200, 400, and 800 Hz at a maximum of +12 dB, the low frequency cut 20, 30, 60, 100, 200, 400, and 800 Hz at -18 dB maximum, high frequency Boost: 3, 4, 5, 8, 10, 12, and 16 kHz at a maximum of + 18dB, high frequency cut: 3, 4, 5, 10, and 20 kHz -14 dB maximum. 2U, 19" rackmount chassis.
Made in: China
Type: Boost;Equalizer
Rackmountable: Yes
UK/EU Power supply included: Yes
Power Supply: 240V

Bluetooth for direct, wireless connection
Playback your Hi-Res music files
CD player built-in
Digital connectivity
Connect analogue sources

SA-series Secure Wall Amplifier 100V with UHF Mic + Media PlayerPublic address mixer-amplifier built into a surface-mount secure box. A powerful output can drive either 100V line or low impedance speakers from binding post terminals inside the cabinet. The system includes a handheld UHF microphone with an inbuilt receiver and 2 switchable wired mic/line inputs are provided on combo XLR/jack sockets. Each mic input has switchable +48V phantom power and priority override, whch mutes the Aux inputs during voice operation. An internal media player enables playback of audio tracks from USB/SD player, FM tuner or Bluetooth pairing. Alternatively, line inputs can be connected to the Aux 1 RCA sockets …

Signal Splitter / 19 Inch Size / Number of Channels 1 / Rack Height 3 RU

The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
Number of Outputs: 4
Made in: China
Number of Input Port…

Phantom power adapter that runs on AA batteries and provides powering for electret condenser microphones when phantom power is not available. It features an on/off switch and a bass roll-off filter. Connectors are standard XLR-m to mini XLR-m. It can be used with various Audix microphones, including the ADX20iP, ADX40, ADX60, f90, MicroD, or MicroHP models.
Made in: China