Amplifiers

Trade in the Roksan Blak Integrated Amplifier with AV.com. This process allows for an audio equipment refresh and a chance to experience the newest sound technologies. The Roksan Blak while a stellar amplifier may be due for an upgrade to keep pace with evolving audio requirements. Consider the possibilities of transitioning to a modern DAC-equipped stereo receiver or another integrated amplifier. Trading in with AV.com is not just environmentally conscious but also a pathway towards elevating your sound experience.

The HT Club 50 MK III offers the same feature set as the HT Club 40 MK III combo in a compact, portable head format. This two channel and 4 voice head with its Power Reduction feature is equally at home in the rehearsal room, studio or club size venue. With the patented ISF control, clean and overdrive channels ranging from ‘classic crunch’ to ‘super saturated lead’ the HT Club 50 head truly is the ultimate amp for the gigging guitarist.Innovative 50 Watt valve head2 x ECC83 and 2 x EL34 valvesTwo footswitchable channelsFour footswitchable voicesBoutique clean channel with expanded tone controlsHigh gain overdrive channelPatented Infinite Shape Feature (ISF)Power Reduction …

Integrated Amplifier / Stereo / Output power per channel 40 Watt / Max Sample Rate 48 kHz / Bitrate 24 bit / Bluetooth

Signal Processor / 19 Inch Size / Processor Type Limiter / Number of Channels 2 / Rack Height 2 RU

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

Support Native DSD512 PCM 32bit768kHz AES, USB, Optical, coaxal which all support up to 24bit192K input. USB and IIS support 32bit768k & DSD512 input. D70 use 2 x ACCUSILICON femtosecond crystal to make the Jitter lower. D70 use 2 x ACCUSILICON femtosecond crystal to make the Jitter lower.

Use Rohm's flagship DAC chip BD34301EKV, and fully optimize its performance to make its THD+N as low as-117dB. USB uses XMOS XU-316, a real 32bit USB solution, PCM supports up to 768kHz, and DSD supports up to DSD512 The all-new CK-03 clock processing circuit achieves ultra-low clock jitter, making the clock jitter of fiber coax as excellent as USB. Customized low noise porcupine linear power supply. Qualcomm's latest Bluetooth chip supports SBC, AAC, aptX, aptX HD, LDAC The specially designed discrete component stabilized power supply and multiple low-noise stabilized power supplies provide low-noise power supply for analog circuits.

CE22 stereo enhancer/exciterThe CE22 is a professional multi-band enhancer/exciter designed for various applications. This unit combines 2 processors to align the phase and focus of bass frequencies, improve the response of mid-high frequencies and add harmonic content to any "dull" sounding audio. The surround processor utilises the phase alignment engine to give a greater perceived width to the stereo field.Dual/stereo multi-band processorProcess variable between enhancer and exciterDedicated bass processorsSurround processor to add width to stereo fieldAuto noise reduction circuitryBypass switch for processed/unprocessed comparisonBalanced and unbalanced inputs and outputs

Compatible with DSD256 and PCM384 - D10s is compatible with 16-32bit/44.1-384kHz and DSD64 - DSD256(support both Dop and Native) XMOS XU208 and Customized Driver - D10s use XMOS XU208 for USB interface and use customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.And use ESS ES9038Q2M to make THD+N as low as 0.0002%@1kHz Automatic Power On/Off - Although the USB port support power after PC has shutdown,D10s still will synchronously power on/off with PC Replaceable OP - It has OP amp socket,DIYer could change the OP amp to get different sound.Notice:D10's electrical parameters will change if use other OP Multiple Applications …

Phantom power supply for microphones. Different condenser microphones specify different amounts of required phantom power. As a rule these ratings can range from 48 V all the way down to 9 V. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be ''more is better''. Features XLR input and output, and 18 V DC input. Power supply is included. Dimensions: 130 x 74 x 45 mm. Weight: 315 g. Made in: China

Digital-to-Analogue Converter

Integrated Amplifier / Stereo / Output power per channel 35 Watt / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Ultra-low THD+N :THD+N of E70 VELVET is already lower than 0.00006% (A-weighted), accurately restores the music to every detail. The three senses are one: In addition to product performance, TOPPINIG also pays attention to the convenience of product aesthetic design and controlling. Hearing, vision and touch have been unified on the E70 VELVET. LDAC 24bit/96kHz Bluetooth transmission :E70 VEL VET has the certification of Hi-Res Audio Wireless and L DAC. It uses newest QCC5125 chipset to support LDACIAAC/SBC/aptX/ aptX LL/aptX HD/aptX Adaptive protocol by Bluetooth 5.1. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect it's digital signal to

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. Supports amplifiers with up to 300 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

6-separate headphone amplifiers 1-input solo per amplifier switchable to the common main input Main input with low/high selector switch for matching the input signal Inputs: solo stereo 6 x 6.3 mm jack Outputs: headphones stereo 6 x 6.3 mm jack