Boat Motors

Secures Advanced GPS Navigation Wireless Remote to belt with included belt clip or direct to console. Compatible only with Advanced GPS Navigation system remotes. HOLDING CRADLE ONLY. Remote sold separately.

Grey

new

Allows trolling motor to be quickly removed from and reattached to boat deck Sidescrew design attaches trolling motor to top bracket and slides into deck-mounted bottom bracket, secured with tightening screw Solid, anodized aluminum construction Includes mounting hardware Brackets can be secured with padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 Designed for use in freshwater

Provides 3” of additional setback to all mounting applications where specific clearances are required for Raptor Shallow Water Anchors Lightweight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware 5-year warranty

Allows for power on/off functionality of select motors via remote mounted rocker switch Interchangeable white and black switch covers included for all mounting applications Dimmable LED backlight indicates switch position Can be used with or without optional wired foot pedal accessory via y-cable connection 30' lead length.Compatible with QUEST series Ulterra, Terrova, Riptide Terrova and Riptide Instinct motors

Increases effect of lift-assist for motors equipped with both Humminbird MEGA Live Imaging TargetLock as well as Humminbird MEGA 360 Imaging Reduces effort required for motor stow and deploy Replaces factory standard lift assist cylinder Designed for 24V, 80lb or 36V, 112lb Ultrex motors with a shaft length of 52” Compatible only with Advanced GPS enabled Ultrex motors manufactured in 2023 or later. To increase the affect of lift assist for i-pilot or i-Pilot Link Ultrex motor models manufactured prior to 2023, a MEGA Live TargetLock and MEGA 360 Ultrex Accessory Mount is required. These models will not accept an updated lift assist cylinder only. One-Year Warranty

Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with 1/4", short shank padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the MKA-53 model. Designed for use in freshwater

Minn Kota Mkr-us2-11 U.sonar 2 Ext Cable 1852080 one size

Increases effect of lift-assist for motors equipped with both Humminbird MEGA Live Imaging TargetLock as well as Humminbird MEGA 360 Imaging Reduces effort required for motor stow and deploy Replaces factory standard lift assist cylinder Designed for 36V, 112lb Ultrex motors with a shaft length of 45” Compatible only with Advanced GPS enabled Ultrex motors manufactured in 2023 or later. To increase the affect of lift assist for i-pilot or i-Pilot Link Ultrex motor models manufactured prior to 2023, a MEGA Live TargetLock and MEGA 360 Ultrex Accessory Mount is required. These models will not accept an updated lift assist cylinder only. One-Year Warranty

Increases effect of lift-assist for motors equipped with both Humminbird MEGA Live Imaging TargetLock as well as Humminbird MEGA 360 Imaging Reduces effort required for motor stow and deploy Replaces factory standard lift assist cylinder Designed for 24V, 80lb Ultrex motors with a shaft length of 45” Compatible only with Advanced GPS enabled Ultrex motors manufactured in 2023 or later. To increase the affect of lift assist for i-pilot or i-Pilot Link Ultrex motor models manufactured prior to 2023, a MEGA Live TargetLock and MEGA 360 Ultrex Accessory Mount is required. These models will not accept an updated lift assist cylinder only. One-Year Warranty

Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Compatible with Ultrex, Fortrex, Maxxum, and Edge. NOTE: Not for use with 72" shaft length motors.

Provides 2” of additional outboard engine clearance by spacing raptor mounting brackets from jack plate Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty

For small boat, transom applications (boats that do not have battery compartments) Allows trolling motor leads and charger leads to be connected without opening the box. Built-in battery meter includes two 12-volt accessory plugs, and 2 manual reset circuit breakers Displays current "state of charge". Fits group 24- and 27-size batteries.

Compatible with 10 foot Minn Kota Raptor models only. UV resistant vinyl All-weather, corrosion-resistant zipper Not intended for use while on the water 1 Year Limited Manufacturer Warranty

Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP.NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer.Designed for use in saltwater

Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Locking handle can be secured with padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 (not for use with 72" shaft length motors)

Water-proof. Cable-steer foot pedal. Ergonomic design exact speed control. 14.7 feet cable. Easy to operate.

Premium outboards with outstanding Build Quality and Performance from HASWING Motors UK. 2 Years Warranty. Tough, lightweight and portable trolling motor. Use in saltwater and freshwater. With a durable cast aluminium shaft, weighs only 2.3kg and is the lightest in its class. Compact space saving with a folding lever. 2 forward, 2 reverse speeds. 20Lbs Thrust. Requires 12V Battery. Suitable for small kayaks, dinghies and inflatables up to 2m length. Performance dependent on boat weight, hull design and water conditions.

HUB SPAN 4" BLADE HEIGHT 11" HUB SIZE 2-3/8" SHAFT 1/2"

Allows trolling motor to be quickly removed from and reattached to boat deck Cam-lock reduces bracket movement and noise Composite cover (included) attaches to lower piece of bracket when motor is removed to keep deck profile clean Includes stainless steel mounting hardware, lanyard, and locking pin Upper and lower plates include slot for securing with padlock (not included) for added security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 Designed for use in freshwater