Amplifiers

Focusrite Scarlett OctoPre is an 8-channel microphone preamplifier and AD / DA converter with ADAT digital interface. The second generation of microphone preamps operates at 24 bit / 192 kHz and offers a dynamic range of up to 109 dB. Two analog inputs located on the front panel are capable of handling microphone, line or direct instrument (Hi-Z) signals. OctoPre is the ideal studio accessory for extending the connectivity of Scarlett Sound Cards and other ADAT-enabled devices. The converter is designed for rack installation, where it occupies one height unit.

The Scarlett OctoPre features eight analogue inputs with combined XLR / TRS connectors. Each input channel has a volume control and …

Signal Splitter / Desktop / Number of Channels 1

PA−120Z is a high−performance selectable Hi−Z (70V/100V) or Lo−Z (4Ω/8Ω) power amplifier featuring balanced and unbalanced inputs and additional line−level output. This versatile amplifier features built−in DSP auto−standby and maximum durability. PA−120Z is suitable for a vast range of AV installations.

• High–performance Amplifier — With built–in DSP and additional balanced stereo line–level output. PA–120Z features flat frequency response unmatched sonic performance excellent signal to noise ratio and extraordinarily low distortion levels.

• Adaptable to Any AV Installation — Switch …

From the portable desktop-level unit M17, the portable desktop-grade DAC and amp Q7, to the more portable yet desktop-capable M15S, audiophiles’ warm reactions to these models prove many love desktop-level audio gear. After being successfully applied to the three high-end models, the desktop mode will now evolve and be applied to audio dongles. The FiiO KA13 mini desktop amp features a desktop mode to fully unleash its performance.
With two high-performance yet highly efficient CS43131 DAC chips and two low-noise SGM8262 op-amps, this truly “dual-core” golden combo brings excellent performance. Rediscover your music collection again full of newly discovered details with the KA13.
The KA13 f…

US Series Compact 100V Slave Amplifiers100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, the US amplifiers have a 100V input on removable screw terminals, which enables the amplifier to be connected in parallel with existing 100V speakers to extend the system. Mono output to either 100V line or an 8 ohm speaker load is connected via a separate removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.DetailsPower supply 170-264Vac, 50Hz (IEC)Inputs Line (RCA),…

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Channels:1, Inputs: 1, Input connectors: 6.3 mm Jack, Max. input level: + 54 dBu. Input impedance:
Made in: Germany
UK/EU Power supply included: No
Type: DI Box

dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and …

The Voco-Loco is a foot-controlled effects loop that enables the lead vocalist, sax or trumpet player to incorporate guitar effects pedals into the signal path, just like an electric guitarist adds effects for soloing. The design begins with a state-of-the-art mic preamp that is designed to accept both a standard dynamic microphone or a condenser by activating the built-in phantom power supply. A great sounding two band EQ with low and high frequency shelving makes it easy to add warmth and shimmer. The signal is then sent to the guitar pedals via a transformer isolated hi-Z effects loop circuit that is equipped with individual send & receive controls to optimize signal-to-noise and reduce distortion.…

Project Accu Box S2 high end power supply for Box Design, including Phono Boxes
Li-Ion battery driven, eliminating mains power interferences
Real ground reference for turntables kills any possible hum
One 18V and one 5V USB-A outputs for DACs
Full aluminium casework in black or silver