Amplifiers

Slimline PA power mono amplifier from Monacor. This professional 100V PA amplifier is designed for small-medium scale PA systems where reliable amplification is required over a long speaker line; such as schools, colleges, supermarkets, factories, warehouses, etc. Designed to be installed into a 19" rack (2U) cabinet or case, but can also be free-standing on a desktop counter or desk, etc. Rackmountable: Yes UK/EU Power supply included: No Battery Operation: No Made in: China Weight: 3,5 kg Power (Watt): 120.0 Power Supply: 240V

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play:turn your PC into a HIFI source USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

Unmatched Performance With Latest AKM DAC Chipset: SMSL has featured the latest-generation AK4493S AKM DAC chipset on the latest Sanskrit 10th MK3. The DAC here has been implemented with great precision, it delivers quality high-resolution audio signal decoding with ultra-low distortion ratings!! 3rd-Generation XMOS USB Processor: Sanskrit 10th MK3 utilizes a 3rd-generation XU316 USB processor chipset from XMOS Technologies. It allows for clear transmission of high-resolution audio signals via the Input port and handing them over to the DAC chipset. With the help of this latest USB Chip, the Sanskrit 10th MK3 decodes high-resolution 32-Bit/768kHz PCM and native DSD512 signals. New Upgraded …

CG Series Guitar AmplifiersClassically styled guitar combo in a vinyl covered cabinet with metal corner protectors and basket-weave style grille cloth. Front control panel is recessed with retro "chicken-head" control knobs and additional features for Gain, EQ and outputs. Custom solid-state circuitry is voiced to produce authentic vintage-style clean and driven tones.DetailsPower supply 230Vac, 50Hz (IEC)

Customized Thesycon driver + XMOS XU208 + ES9018K2M + OP Maximum support DSD256, PCM384kHz/32bit Orange indicator of format & sampling rate Auto on/off

Phono Preamplifier

Digital-to-Analogue Converter / Stereo / Output power per channel 100 Watt / Bluetooth

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

The Topping PA3S Class D Power Amp is packed with high-quality features that will boost the sound power of your speakers. The PA3S will connect to 4-8ohm speakers and is equipped with two RCA and TRS inputs. Its compact design allows for flexible positioning and houses first-rate capacitors and relays. The Class D amplifier is equipped with two MA12070 chips that generate a power output of 80W x 2 and have a THD+N rating of 1%. Offering an LED-lit front panel you can view the input status of the amp and be notified of any faults. The amp is also home to over-heating protection that will enable long durability and it also has a black finish that will fit in with your homes character.

The C480 B is the pre-amp for the ultralinear series capsules, CK61, CK62, CK63, and CK69 ULS, and represents one of the quietest microphone amps ever built. The C480 B offers excellent audio quality and maximum flexibility. Its electronic circuitry coupled with a transformerless output stage assures completely linear transfer characteristics across the entire frequency range, while achieving self-noise figures close to the theoretical minimum.A specially designed output stage drives difficult loads like excessively long cables without harming the signal quality. The C480 B offers a two-step high-pass filter and two gain stages of either -10dB or +6dB. Made in: China

UA Series Compact 100V Mixer-Amplifiers Compact Amplifier in a half width 1U housing, 3 switchable mic/line inputs, an RCA line input and a 3.5mm Aux input. All governed by a front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable terminal connector on the rear panel. Supplied with rack-mounting hardware, which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations. PRODUCT FEATURES: Supplied with hardware for rack-mounting 2 units 5 input channels 24V fire alarm mute contacts 100V line or 8 Ohms operation SPECIFICATION: …

Dual ES9039Q2M. The D50 III uses 2x ES9039Q2M, one for the left channel and another for the right channel, which delivers higher SNR, higher dynamic range, and lower distortion than the D50s. Brand new I/V conversion. A brand new I/V conversion circuit is designed for better audio reproduction. The new circuit design provides lower distortion and lower noise while occupying less space. Designed to approach physical limits in order to maximize the full performance of the DAC chip. CNC Unibody. D50 III has a unique integrated design. It has gone through dozens of processes of planning, design and precision machining from solid aluminum bricks. CNC machining provides excellent electromagnetic …

Germany's Infineon's new silicon carbide digital power amplifier chip is of higher quality, while the efficiency is as high as 92%, which further reduces energy consumption. USB audio input, and supports driver-free use. With 2 sets of subwoofer signal pre-output, it is convenient to connect the active subwoofer to form a 2.1 or 2.2 system. Bluetooth 5.0 reception, better sound quality, longer transmission distance A large number of audiophile audio components are used to enhance the subjective sense of hearing. Built-in low-noise, high-power audio dedicated switching power supply to ensure a steady stream of music power. High-quality gold-plated input and output terminals. Complete protection …

RMS-series Multi Zone 100V AmplifiersMulti-channel 100V slave amplifier with independent outputs for 100V or 4-16 Ohm speakers. Each amplifier channel has its own independent line input, which can be switched to a global auxiliary, providing the option of the same input to several of the amplifier channels if required. A paging microphone input is provided for voice alerts and a 24V mute terminal can be connected to an alarm panel for emergency evacuation override. Class D circuit design and efficient toroidal transformers have enabled a design which fits into a 1U rack-mount housing. The RMS-series amplifiers can be applied as high power slave units or equally as a fully independent zoning …

TOA A-3248DZ audio amplifier 5.0 channels

Signal Processor / 19 Inch Size / Processor Type Graphic EQ / Number of Channels 2 / Rack Height 3 RU

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play, turn your PC into a HIFI source : USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and