Amplifiers

Dual channel level converter. The CLEANBoxPro provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and portable unit. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used. Each section has stereo level controls to optimize signal levels. An LED indicator lights when power is applied. Frequency response: 20 Hz - 20 kHz. Comes with external power supply. Dimensions: 47 x 117 x 109 mm. Weight: 0,5 kg. Made in: China

It took Joyo’s engineers two years to develop this patented new product: TheJAMBUDDY Combining guitar playback with its reduced high frequency range due to the sound of 12 inch speakers and also full range normal music playback is a difficult task. Some products on the market have already dealt with this issue and they are nice practice boxes that are controlled by hand on a table top. But this is not how guitar players operate their gear, we need our hands free and we stick our gear with our feet. JAMBUDDY combines both aspects, it is a floor based dual channel amp simulator that can be switched with your feet and also accepts a BLUETOOTH signal to play back your favorite backing tracks and so…

Power Amplifier / Number of Channels 2

Compact dual-path microphone/instrument preamplifier that is capable of a stunningly wide range of tones and offers two independent channels, each with a high-headroom XMAX Class A solid-state preamp with 80dB gain range followed in the signal path by a 12AX7 vacuum-tube stage. A Tube Drive control provides a wide range of sounds: when clicked off, user is using the solid-state preamp for quiet, transparent amplification; when engaged, the signals flow through the tube preamp, and user can achieve anything from gentle warmth to edgy distortion. Equipped with two balanced combo mic/unbalanced instrument inputs, two balanced XLR main (L/R) line outputs and two unbalanced 6.3mm main (L/R) line …

Power Amplifier / Total Connected Load 200 W / Number of Channels 1

Power Amplifier / Total Connected Load 2,400 W / Number of Channels 2

Low-noise voltage reference power supply: The brand new Low-noise voltage reference power supply effectively reduces the output noises and distortions to excellent level. Basing on this design, the distortion of E70 VELVET is as low as-125db and the noise is no higher than 1.3uVrms. Newest XMOS XU316 support DSD512&PCM7 68kHz USB input of E70 VELVET has a wide range of compaibiity: Windows 10, Windows 11, MAC, Linux, lIOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU316 and Thesycon custom driver (applicable to Windows, other systems are free of driver),which is stable and reliable.

Unmatched Performance With Latest AKM DAC Chipset: SMSL has featured the latest-generation AK4493S AKM DAC chipset on the latest Sanskrit 10th MK3. The DAC here has been implemented with great precision, it delivers quality high-resolution audio signal decoding with ultra-low distortion ratings!! 3rd-Generation XMOS USB Processor: Sanskrit 10th MK3 utilizes a 3rd-generation XU316 USB processor chipset from XMOS Technologies. It allows for clear transmission of high-resolution audio signals via the Input port and handing them over to the DAC chipset. With the help of this latest USB Chip, the Sanskrit 10th MK3 decodes high-resolution 32-Bit/768kHz PCM and native DSD512 signals. New Upgraded …

A22 Stereo PA AmplifierDigital stereo PA amplifier with integral media player in a compact housing. Class-D amplifier section can deliver up to 2 x 55W max. output for background music with a microphone input for announcements or alerts. The media player section can select between USB / microSD mp3 player, FM tuner, Bluetooth receiver, 2 stereo line inputs (rear panel RCA) and another line input on the front panel (3.5mm). Playback can be controlled from the front panel or by the supplied I.R. remote control. Four mounting brackets are provided which enable the A22 to be fitted under a counter top or against a wall for discreet installation. Two A22 units may be mounted side-by-side into a …

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

Double your fun with two channels of active ultra-clean gain. Provides two channels of up to +25dB of ultra-clean gain and optimal impedance loading for dynamic and ribbon mics to perform their best. Simply connect one or two dynamic or ribbon mics to the input and connect a mixer or preamp to the output. Great for two mono channels or a stereo configuration. Turns Phantom Power into gain and clarity without passing it through to your delicate ribbon mic. The Cloudlifter allows you to cut through the mix on stage with increased gain before feedback. The Cloudlifter's discrete JFET circuitry preserves the source's natural sound while keeping the direct audio path clear of transformers,

The Topping LA90 Class AB Power Amp will give your speakers a boost to produce a stunning sound. Offering stereo/mono channels that transmit immense power you will hear music in dynamic audio. Equipped with multiple balanced inputs such as XLR and TRS you will connect an array of audio devices to the amplifier. With THD+N which offers low distortion levels and 2-step gain settings you can be certain that everyone will be able to hear your music. You can also control the volume with ease thanks to the stylish remote control. The CNC machined case in aluminium offers reliable protection for the amplifier and ensures its durability.

Headphone Amplifier / Number of Channels 1

SMSL A200 uses 2 pieces of Infineon's new Silicon Carbide digital power amplifier chips, which provide higher quality and up to 92% efficiency, further reducing energy consumption. Support Bluetooth, optical, coaxial, HDMI audio, USB, line input. new Bluetooth 5.0 technology, both low power consumption and high sound quality. Support HDMI (ARC) audio return function, used to connect to the HDMI interface of the TV, to achieve the output of the TV audio. electronic volume control, eliminating the potentiometer volume adjustment when the noise. Optical support up to 24bit/192kHz signal input. With sound effects adjustment, high and low sound individually adjustable. With pop sound control circuit,…

Super audio reproduction ability with ultra low distortion: The E70 uses ESS SABRE flagship DAC ES9028PRO. ES9028PRO has a 32-bit 8-channel HyperStream II architecture. In the application of E70, every 4 channels are connected in parallel as one channel, achieving high performance and high sound quality at the same time. Brand new IN conversion: A brand new IN conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics SO that we are able to squeeze out the last bit of performance of the DAC chip. Excellent performance: THD+N of E70