Amplifiers

The JCM25/50 Silver Jubilee Series was produced in 1987 to celebrate 25 years of Marshall Amplification and 50 years of Jim Marshall being in the music business. Inspired by this acclaimed series the 20 Watt Mini Jubilee combo and ‘small box’ head combine classic Silver Jubilee preamp tone, features and styling in a lower power, ‘mini’ design. This contemporary ‘mini’ take on the Jubilee Series features: an ECC83 & EL34 valve-set, High/Low output switching, (20 Watt to 5 Watt), FX Loop and independent 4/8/16 Ohm speaker outputs. The 2525C combo is loaded with a single 12´´ Celestion G12M Greenback speaker. In keeping with classic Jubilee tone, Mini Jubilee features preamp circuitry taken from the…

Summing Amp

The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen balanced low impedance microphone signals. Each channel of the S8 provides one direct output and one transformer isolated output from a single microphone. The S8 includes a ground-lift switch on each isolated output to reduce noise due to ground loops between connected equipment. Frequency response is 20 Hz - 20 kHz. Dimensions: 531 x 178 x 89 mm. Weight: 1,9 kg.
Type: Splitter
UK/EU Power supply included: No
Made in: China

The Voco-Loco is a foot-controlled effects loop that enables the lead vocalist, sax or trumpet player to incorporate guitar effects pedals into the signal path, just like an electric guitarist adds effects for soloing. The design begins with a state-of-the-art mic preamp that is designed to accept both a standard dynamic microphone or a condenser by activating the built-in phantom power supply. A great sounding two band EQ with low and high frequency shelving makes it easy to add warmth and shimmer. The signal is then sent to the guitar pedals via a transformer isolated hi-Z effects loop circuit that is equipped with individual send & receive controls to optimize signal-to-noise and reduce distortion.…

Hi-Fi stereo amplifier. Bluetooth receiver. USB / MP3 player. FM Radio. Microphone inputs with echo and tone. Aluminum panel. Remote control for player. POWER: 230 V AC, 30 W, RESPONSE: 20-20,000 Hz, S/N RATIO: > 70 dB, INPUTS: 1 aux, 2 x RCA, 17,000 Ω 220 mV RMS 2 balanced mics, 6.3 mm jack, 900 Ω 9 mV RMS, OUPUTS: Speakers: Main L / R, 4-16 Ω screw terminals or bananas, PROTECTION: Temperature, short circuit and overload
Power Supply: 230V
Package Contents: Manual;Power Cable
Impedance: 16 Ohm
Height (cm): 9.0
Number of Channels: 2
Radio: FM
Battery Operation: No
Net Weight (kg): 2.65
Made in: China
Microphone Input: Yes
Power: 30 W
SD Slot: No
USB: Yes
Width (cm): 25.0
MP3 …

P44800 amp 2 x 400W + 800W sub

2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.
Mono summed sub output (can be full range)
Active crossover with variable frequency
Stereo full range output
Power rms @ 8 Ohms - 250 + 250 + 500W (sub)
Power rms @ 4 Ohms - 400 + 400 + 800W (sub)
Weight - 21kg
Fuse rating - F12A

With the devices of the XDA series, you get PA amplifiers with high power, but low weight. Besides that, you won’t need much space in your rack for mounting them, as both models are only one unit high (44 mm). The smaller version, the XDA-1002, offers 2 x 510 watts at 4 ohms (RMS) – and a weight of only 4 kilograms. Its bigger brother, the XDA-2402, has 2 x 1200 watts at 4 ohms (RMS) and won’t make your back hurt either with its weight of only 6.4 kg. Despite its low weight and the manageable dimensions, you won’t need to lower your sights regarding sound or safety. The XDA series convinces even very skeptical users with excellent sound characteristics and highly effective,…

Headphone Amp / XLRIn Balanced

Active 2-channel DI Box. The Palmer PAN04A 2-channel DI box allows you to feed the unbalanced hi-Z signals of electric instruments to the microphone inputs of a mixer. It delivers a transformer balanced lo-Z signal at the outputs and helps eliminate hum and interference caused by ground loops. The active circuitry preserves frequency response and provides increased dynamics. The unit also features a 1/4" direct out and switchable -30 dB pad on each channel. An additional balanced XLR output merges both input signals to mono, e.g. for summing the L and R channels of a stereo instrument. With its tough construction, the PAN04A is equally suitable for stage and studio use. It operates on any standard …