Amplifiers

UA Series Compact 100V Mixer-Amplifiers Compact Amplifier in a half width 1U housing, 3 switchable mic/line inputs, an RCA line input and a 3.5mm Aux input. All governed by a front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable terminal connector on the rear panel. Supplied with rack-mounting hardware, which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations. PRODUCT FEATURES: Supplied with hardware for rack-mounting 2 units 5 input channels 24V fire alarm mute contacts 100V line or 8 Ohms operation SPECIFICATION: …

Product Country Of Origin: China Product Weight: 2235 (GR) Product Pack Size: Pack of 1

The Xvive P1 Portable Phantom Power Supply is a low-noise, 12V / 48V power supply. It runs on an internal rechargeable battery and has enough power to run high-current microphones. The P1 allows you to use microphones and devices that require external power in any setup. The small size, light weight, rugged construction, and exceptionally low noise of the P1 makes it perfect for powering microphones to send a signal to mixing consoles, or any type of processor or recording unit, that does not supply phantom power. Long battery life and a bright LED battery indicator ensure that the microphone is properly powered throughout your recording session. Switch: Yes Made in: China Package Contents: …

Trade in your Arcam FMJ AVR400 AV Receiver with AV.com. If youre looking to enhance your home cinema or audio setup considering a trade-in could be a prudent move. The FMJ AVR400 has been a solid performer known for its audio quality and reliability. However advancements in audio-visual technology such as support for the latest surround sound formats 4K video pass-through and integrated streaming services may offer a more immersive experience. By trading in at AV.com you can explore the latest in AV receivers possibly opting for models that offer these modern features ensuring your home entertainment system remains at the forefront of technology and provides the best possible experience

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases (or decreases) the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 50 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

The AL200 is capable of direct sampling of PCM digital audio up to 32bit/ 768kHz without the need to downsample. It also supports native DSD playback up to DSD 256 without conversion. On the front panel, a 6.35mm TRS headphone jack is provided, capable of delivering significant power output. The volume control for headphones and passive speakers are separate, adjusting one will not affect the other. For the first connection of AL200 via Bluetooth, you need to pair it with your smart device. Subsequent connections will be automatically established within a few seconds after switching to Bluetooth input or turning on the device. When switching from Bluetooth input to other inputs, playback will …

Microphone Pre-Amp / 19 Inch Size

2xMA12070 Fully balanced Class D amplifier ：Each channel of PA3s uses one MA12070 Class D power amplifier chip. This allows separation in layout improving performance and reducing crosstalk. The power is shared across two chips, the heat dissipation is also halved for each chip, improving reliability and extending the lifespan of the product. High output power ：PA3s could output 80W x2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1%，output power will be 65W x2 at 4ohm load. The output power is enough to drive any bookshelf speakers and even some floor speakers. Balanced + Single- ended inputs ：PA3s provides TRS balanced input and RCA single: end- ed input. The u use of

Flagship achievement flagship :D90LE uses ESS SABRE ES9038PRO, with 32bit Hyperstream architecture, achieves ultra-high performance in the audio field. Each channel of the D90LE will be arranged in parallel by 4 conventional balanced channels. This makes the performance of D90LE even better. Bluetooth 5.0 LDAC transmission: D90LE has the certification of Hi-Res Audio Wireless and LDAC. It uses CSR8675 chipset to support LDACIAAC/SBC/APTX/APTX LL/APTX HD protocol.To get even better sound quality from Bluetooth, we abandon the built-in DAC of CSR8675 and connect it'sdigital signal to ES9038PRO to decode. We use CPLD to process the clock and greatly optimize the digital signal, so that

With the cooperation of CK-03 rebuild the clock management of ES9038PRO: Keep it work in accurate clock, and make full use of performance of ES9038PRO! Support MQA full decoding: MQA working principle Support MQA CD: CD Player + MQA-Enabled DAC Your CD player's digital output (optical or coaxial) can be fed to an MQA de coder. The MQA decoder can restore the original high-resolution signal heard in the studio and confirm it, using the authentication signature. Qualcomm's latest Bluetooth chip: Support LDAC, APTX/HD, SBC, AAC Wireless remote control can be used as pre-amp Equipped with small durable: full-featured remote control for convenient use

CG-10BT Guitar AmplifierClassically styled guitar combo in a vinyl covered cabinet with metal corner protectors and basket-weave style grille cloth. Front control panel is recessed with retro "chicken-head" control knobs and additional features for Gain, Volume and EQ, with an additional Drive boost switch. Custom solid-state circuitry is voiced to produce authentic vintage-style clean and driven tones. BT wireless pairing capability can be used for playing backing tracks for solo practice or just as a playback device. An ideal practice or recording amplifier for electric guitar players.DetailsPower supply 230Vac, 50Hz (IEC)Output 10WrmsSpeaker 165mm (6.5")Controls Gain, Drive, Volume, Treble,…

It took Joyo’s engineers two years to develop this patented new product: TheJAMBUDDY Combining guitar playback with its reduced high frequency range due to the sound of 12 inch speakers and also full range normal music playback is a difficult task. Some products on the market have already dealt with this issue and they are nice practice boxes that are controlled by hand on a table top. But this is not how guitar players operate their gear, we need our hands free and we stick our gear with our feet. JAMBUDDY combines both aspects, it is a floor based dual channel amp simulator that can be switched with your feet and also accepts a BLUETOOTH signal to play back your favorite backing tracks and so…

The Topping PA3S Class D Power Amp is packed with high-quality features that will boost the sound power of your speakers. The PA3S will connect to 4-8ohm speakers and is equipped with two RCA and TRS inputs. Its compact design allows for flexible positioning and houses first-rate capacitors and relays. The Class D amplifier is equipped with two MA12070 chips that generate a power output of 80W x 2 and have a THD+N rating of 1%. Offering an LED-lit front panel you can view the input status of the amp and be notified of any faults. The amp is also home to over-heating protection that will enable long durability and it also has a silver finish that will fit in with your homes character.

Length (mm): 196Width (mm): 148Height (mm): 25Main Colour: GreenCountry of Manufacture: ThailandMPN: FK659Minimum Operating Temperature: -40°CMaximum Operating Temperature: 85°CNumber of Items: 1Manual/Instructions Included: YesDowloadable files: YesSolder Level: Through-holeInput DC Voltage: -35/35VOperating Current: 3AImpedance: 15kΩOutput Power: 35W-35WType: Class ABHarmonic Distortion Minimum: 0.0002Frequency Response: 10Hz-100kHzSpeaker impedance range: 4Ω or 8ΩThis is a kit that once complete provides a small Class AB Stereo audio amplifier suitable for an 35W per channel stereo output. This is a DIY kit and as such will arrive unsoldered. The kit makes ideal