Engine oil 1 L Einhell GC-MM 52 I AS  all engine oils →

Suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA A3/B4, API SL or earlier specification 0W-40 lubricant. Specifications: ACEA A3/B4 API SL BMW Longlife-01 MB-Approval 229.3/ 229.5 VW 502 00/ 505 00 Renault RN 0700 / RN 0710 Maximises short and long term engine performance Improves engine efficiency, independently qualified Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures Reduces engine deposits to help maximise engine response Exceed high performance standards set by premium car manufacturers including all FPV models, modern European and Japanese prestige vehicle

Car Engine Oil / Inhalt 1 l

A professional, fully synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in both petrol and diesel engines.

100% synthetic 2 Stroke 1 Liter

Millers Oils CFS (Competition Fully Synthetic) Nanodrive is an engine oil developed for Motorsport use. The use of Nanodrive technology hugely reduces friction, compared with traditional synthetic oils, resulting in improved engine power, reduced engine wear and improved engine efficiency. The 10W40 viscosity is suitable for smaller capacity race and rally engines or turbocharged fast road / trackday use. Also recommended as a performance alternative where a 5W40 is normally specified.Load carrying capacity many times that of mineral oilHigh film strength for ultimate protection.Outstanding cold flow properties for reduced wear at start up.Excellent thermal stability and oxidation resistance.…

10 W50

Uses gas to liquids technology which is the basis of all the technology development carried out between Shell and Volkswagen Passes an extensive range of performance tests to meet engine oil specifications VW 502.00/505.01 Item Volume: 1 litres

Millers Classic Mini Oil 20w50 Mineral Engine Oil for Engine/Gearbox units, 2L

Use: motor -

Innovative energy-saving, low-viscosity, fully synthetic (PAO-based) premium engine oil for the latest models of VAG turbocharged gasoline (distributed or direct injection) and diesel engines equipped with gasoline (GPFs) or diesel (DPFs) particulate filters.

Repsol Racing 2T Engine Oil provides steadfast resistance against engine wear and enhances both cooling and lubrication for your motorcycle. This superior quality oil features a totally synthetic formula enriched with esters, specifically developed for high-performance 2-stroke engines. To fully appreciate the capabilities of Repsol Racing 2T Engine Oil: Synthetic Ester Formula: The use of synthetic esters ensures that this oil can perform optimally at high RPMs and under heavy loads, enhancing engine performance and ensuring smooth and efficient combustion. High-Temperature Resilience: Designed to cope with extreme heat, this oil maintains its viscosity and protective properties,

Millers Oils Trident Professional 10w40 is a semi synthetic is a high performance engine oil formulated to meet the demanding requirements of today s engines. Recommended for use in modern vehicles where this type of oil is specified by the manufacturer including VW, Renault, Peugeot and Citroen models. Trident 10w40 is especially recommended for use in many modern petrol and diesel vehicles that require a fuel efficient lubricant.Preferred viscosity for many modern enginesHelps to maximise fuel economy and minimise emissionsProtects against wear under arduous operating conditionAllows the use of the modern longer oil change service intervalsSpecifications: ACEA A3/B4, ACEA A3/B3, API SN,

Car Engine Oil / Inhalt 1 l / Approved for Chrysler MS-11106

Millers CB40 is a high quality 40W castor based oil suitable for all 4 stroke car or motorcycle engines which require a vegetable based oil, especially those which run on methanol or alcohol based fuels. CB40 is an ideal substitute for Castrol R40 as it has all the same properties.High lubricant film strength for protection at consistently high RPMReduces friction for increased component life and improved powerExtra load carrying additives provide excellent wear protection under high stress conditionsSuccessfully used in speedway racing for many yearsContains anti-oxidants to improve stability at high temperaturesIdeal substitute for Castrol R40Technical Data Sheet

100% Synthetic Motorsport Oil High Film Strength For Ultimate Protection Reduces Wear On Cold Start Up The Millers Oils CFS (Competition Fully Synthetic) range of motorsport engine oils have been updated and now benefit from the addition of NanoDrive low friction technology. This provides an impressive 26% reduction in friction over the previous range of CFS oils resulting in improved engine horsepower and torque, reduced engine wear and better efficiency.

ULTIMATE PROTECTION AND PERFORMANCE - SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfill the latest standards of leading engine manufacturers. DEPOSIT CONTROL - Special additives prevent the formation of sludge and harmful deposits inside the engine. In the Volkswagen DID test for direct injected diesel engines SynPower SAE 10W-40 delivers optimum performance with regards to piston cleanliness and ring sticking. EXCELLENT COLD START PERFORMANCE - Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition.…

- reduces vibrations and Motorengeräusche - Excellent Oxidationsstabilität - Special Active Reinigungstechnologie High Scherstabilität - Low viscosity, fast Durchölung

Millers Oils EE Performance C3 5W30 is a fully synthetic engine oil featuring 'Nanodrive' technology which hugely reduces engine friction by up to 24% and providing a reduction in wear of up to 25% when compared to other fully synthetic oils. Designed for vehicles which require a C3 5W30 viscosity. Designed for Volkswagen Audi Group (VAG) including Bentley, Lamborghini, Seat, Skoda and Porsche. For use in petrol, diesel and hybrid engines.Improves fuel economy by lowering friction within the engineExcellent wear protection increases component lifeReduces emissionsReduction in friction of up to 24% providing a reduction in wear of up to 25%The Millers Oils EE Performance ECO 5W30 is a track

Increased fuel economy compared to conventional oils Good low temperature fluidity API SL/CF

Specially designed for any type of forks upside/down or conventional. Specific Technosynthese formulation that contains an anti-friction additive specially developed by MOTUL to create easier sliding and to avoid drag in the fork.