Batteries for Drones & RC models

Model Number : R260 Voltage : DC 3.0V Power : 1.61W No-load Speed : 12300RPM nModel Number: ERE-260-2670-38 Rated Speed: 12300 rpm Rated Voltage: 3V Rated Power: 1.61W Rated Current: 4.73A Voltage: 1.5-12V Motor Diameter: 23.5mm Motor Height: 27mm (Not include output shaft) Output Shaft Diameter: 2mm Output Shaft Length: 6mm Application: Toy cars, Christmas items, crafts, remote control cars, small generators. Feature: - Small in size. - Durable and not easy to damage. - For toy car DIY. - Widely used in electric small toy motor, handicraft motor, remote control car motor, bubble gun motor. - The product has stable performance, low noise and high torque. Note: - Please allow 1-5mm errors

Features: 1. High quality metal material is and . 2. Bearing strength is strong enough for daily use. 3. Light weight, portable to carry. 4. Easy to install and disassemble. 5. Your RC car will be more attrective and cool with it. 6. Suitable for 1/10 scale RC cars. Specification: Condition: 100% Brand New Item Type: RC Tow Hook Chain Material: Metal Applicable RC Car: for 1/10 Scale Climbing RC Car Compatible With: for , for Hsp, for Redcat, for , for , for Axial, for scx10, for D90, for Hpi Color: As Shown in The Pictures Chain Length: Approx. 100cm/39.4inch Weight: Approx. 60.6g Package List: 2 * Tow Hooks 2 * Retaining Rings 2 * Screws 2 * Nuts 1 * Tow Chian 1 * U Shaped Pull 4 * U

Description: Used widely for router, booster and WLAN Wifi antenna convertion. The antenna adapter can connect your phone to the antenna to provide better reception in no signal areas. Connectors Model RF TS9 Male Right Angle to SMA Female Size:15cm /5.9" Color:As picture show Quanity:1 pcs The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.

Label:Yes Material: Plastic Product Name: 550/390 gear box gear Use: Vehicles & Remote Control Toys Color: White Size: as picture Package includes: 1 set 390/550 complete gearboxes Notes Due to manual measurement or shooting scenes, there may be some deviation or slight color difference.

Features: This is a great electric motor used for children's cars. The middle gear is made of metal which is more sturdy and . It will make quite low noise and more wear-resistant. There are 4 types for different voltage and speed that you can choose as need. It will be a great replacement part for your broken or old ones. Specifications: Type(Optional): 6V 18000RPM, 12V 12000RPM, 12V 16000RPM, 12V 20000RPM, Total length: Approx. 16.5cm / 6.5inch Hole Diameter: 1cm / 0.39in Quantity: 1 Weight: approx. 270-289g Package Included: 1 x Electric Motor Label: Yes

Model Number: ERS-385S-2270-57 Product Number: ERS-385S-2270-57 Model: 385 Motor Color: See Picture Material: Metal Voltage Range: 3-36V Rated Voltage: DC 12V No-load Current: 3.9A Rated Power: 6.13W No-load Speed: 9800rpm Rated Torque: 72 NM Application: - Widely used for children riding toy bicycle motor, remote control ship motor, high-grade toy motor, hair dryer motor, electric tool motor. - Product performance is stable, low noise, high torque. Package Weight: 65.0 G / 2.29 Ounces Package Dimensions (L*W*H): 57*28*28 MM / 2.24*1.10*1.10 Inches Retail Packaging: No, No Packing Package Include: 1 x DC Motor

Features: [Advanced Design]: The tires use advanced design and advanced rubber materials to provide incredible grip ability and can perform well in any terrain. [Suitable for Any Terrain]: Four anti-slip rubber tires allow the car to travel on different terrains, such as beaches, roads, grass, deserts, etc. [Suitable Remote Control Car]: Replacement for 1/10 1/24 Axial SCX24 FMS FCX24 AX24 Remote Control Truck Car. [Easy to Install]: Easy to install the tires, the tough tires will provide a strong surface grip, DIY enthusiast of remote control car will like it very much. Specifications: Item Name: Remote Control Tires Material: Rubber Quantity: 4pcs Outer Diameter: 72mm Inner Diameter: 35mm

Features: [Advanced Design]: The tires use advanced design and advanced rubber materials to provide incredible grip ability and can perform well in any terrain. [Suitable for Any Terrain]: Four anti-slip rubber tires allow the car to travel on different terrains, such as beaches, roads, grass, deserts, etc. [Suitable Remote Control Car]: Replacement for Trax4 Axial Scx10 Wraith Yikong Rgt Wrangler 1/10 Remote Control Car. [Easy to Install]: Easy to install the tires, the tough tires will provide a strong surface grip, DIY enthusiast of remote control car will like it very much. Specifications: Item Name: Remote Control Tires Material: Rubber Quantity: 4pcs Outer Diameter: 120mm Width: 48mm

Features: [Advanced Design]: The tires use advanced design and advanced rubber materials to provide incredible grip ability and can perform well in any terrain. [Suitable for Any Terrain]: Four anti-slip rubber tires allow the car to travel on different terrains, such as beaches, roads, grass, deserts, etc. [Suitable Remote Control Car]: Replacement for Trax4 Axial Scx10 Wraith Scx10 Yikong Rgt Wrangler 1/10 Remote Control Car. [Easy to Install]: Easy to install the tires, the tough tires will provide a strong surface grip, DIY enthusiast of remote control car will like it very much. Specifications: Item Name: Remote Control Tires Material: Rubber Quantity: 4pcs Outer Diameter: 118mm Inner

Features: [Advanced Design]: The tires use advanced design and advanced rubber materials to provide incredible grip ability and can perform well in any terrain. [Suitable for Any Terrain]: Four anti-slip rubber tires allow the car to travel on different terrains, such as beaches, roads, grass, deserts, etc. [Suitable Remote Control Car]: Replacement for Trax4 Axial Scx10 Wraith Rc4wd Yikong Rgt Wrangler 1/10 Remote Control Car. [Easy to Install]: Easy to install the tires, the tough tires will provide a strong surface grip, DIY enthusiast of remote control car will like it very much. Specifications: Item Name: Remote Control Tires Material: Rubber Quantity: 4pcs Outer Diameter: 110mm Inner

RC Car Storage Handbag for 1/10 RC Off-road Buggy Climber?Drift Crawler HSP94122 94188 RC Model Cars Features: High quality nylon material and durable in use. Big size design for 1/10 RC Model Car. It is convenient to carry the car when go out to play it. The better way to protect the car when you not run it. Any problem, please contact our store without hesitation.?Honor to serve you! Specifications: Item Name: RC Car Handbag Color: Black Material: Nylon Compatible with: 1/10 RC Off-road Buggy Climber Drift?Crawler Size: 50 * 28 * 23cm Weight: 785g * There might be some deviation due to manual measurement. Package Information: Package size: 50 * 30 * 4cm / 19.7 * 11.8 * 1.6in Package

Features: The Package includes RC car steel rope, metal front rear light cover. Improve the simulation of the RC vehicles. Vehicle decoration, front anti scratch and anti-collision parts. Compatible with TRX-4 TRX-6 4X4 6X6 G63 G500 RC car. Specifications: Item Name: Metal Front Rear Light Cover? Main Material: Metal Color: Black Package Information: Package Size: 12 * 8 * 2cm Package Weight: 30g Poly Bag Packing. Note: * There could be a few deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. Packing List: 4 * Steel Rope 4* Metal Front Light Cover 2* Rear Light Cover 1* Some Other Fittings

Features: Sturdy Material: The RC car axle sets are made of aluminum alloy, high strength can be used for a long time, wear-resistant, anti-collision. Fit for: The RC car axle is compatible with 1/24 Axial SCX24 90081 AXI00005 C10 AXI00006 AXI00002 RC car. Better Car Performance: The axle design further improves the body chassis, and enhances climbing and off road performance. Easy to Install: No worry about installation, install easier, good for RC car enthusiast. Exquisite Workmanship: Exquisite workmanship, manufactured and tested to highest standards. Specification: Name: RC Car Axle Main Material: Aluminum Alloy Size: Length: 89mm Note: There could be some deviations due to manual

Includes 5 pins for motor shaft diameter 0.9mm*1,1.75mm*2,1.9mm*1,2.8mm*1, suitable for Mini motors of rc helicopter, plane or servo. Choose the thimble you need to pull,plug in the rotation lever,tighten the screws (Note:There are thimbles with platform, screws should not too tight) Install the gear lever into rotation bracket and fitted swim boards Snapping the motor into the swimming board, and move to pull the motor shaft aligned thimble Rotates active lever as clockwise, pull out the motor gear. Color: silver Material: Aluminum alloy Package Contents: 1 * Motor Pinion Gear Puller Remover Tools Set Only the above package content, other products are not included. Note: Light shooting and

Features: Your RC car looks more realistic with this metal roll cage bucket, which effectively improves the simulation level. Metal material improves the car shell's strength can effectively protect your car from impact. With LED lights, it is convenient to drive at night. Easy to install, compatible with 1/10 Axial SCX10 D90 Tamiya CC01 TF2 RC car. If you have any problems, please feel free to contact us without hesitation. Specifications: Item Name: Metal Roll Cage Bucket with LED Lights Main Color: Black Main Material: Metal Size: 102*118*144mm Note:?* There could be some deviations due to manual measurement or slight color difference owing to photographing conditions. Thank you for your …

Description: Product category:battery Size: 106mm x 34mm x 23mm Capacity: 2200mAh Voltage: 11.1V Packing list: 1Pcs x 11.1v 2200mah 25C lipo Battery Note: The colors deviation might differ due to different monitor settings, please kindly understand.

The Driver is an interesting part to experience DIY delight, it comes with decals, just exert your imagination to create an?unparalleled?RC CAR DRIVER Features: Size: 70 * 60 * 45mm, weight: about 36g. It is tailored for Any RC Car, RC delight is unlimited. Comes with decals, just exert your imagination to create an?unparalleled?RC CAR DRIVER. Neck, shoulders, and waist all pivot, and the knees are hinged to suit different vehicles. Specifications: Brand Name:?Killerbody? Item Name:?Driver Color: Transparent Material: ABS Weight: 36g Size: 70 * 60 * 45mm Tailored for: Any RC Car Note: There could be some deviations due to manual measurement or slight color difference as the result of the shooting …

The rechargeable HSP nitro starter glow plug igniter with battery charger will bring much convenience for you to start 1/8 1/10 nitro car. Features: Light weight and portable to carry High quality and durability in use Rechargeable 1.2V 1800mAh Ni-Cd battery With battery charger brings much convenience Suit for HSP RedCat 1/8 1/10 nitro car Specifications: Item name: Glow plug igniter and charger Material: Aluminum alloy Battery: rechargeable 1.2V 1800mAh Ni-Cd battery Battery charger: US plug Suit for: HSP RedCat 1/8 1/10 nitro car Item weight: 109g Package Information: Package size: 13 * 10 * 4cm / 5.1 * 3.9 * 1.6in Package weight: 115g / 4.1oz Polybag package Package List: 1 * Glow Plug …

The rechargeable HSP nitro starter glow plug igniter will bring much convenience for you to start 1/8 1/10 nitro car. Feature: 100% brand new Light weight and portable to carry High quality and durability in use Rechargeable 1.2V 1800mAh Ni-Cd battery Suit for HSP RedCat 1/8 1/10 nitro car Specifications: Item name: Glow plug igniter Material: Aluminum alloy Battery: rechargeable 1.2V 1800mAh Ni-Cd battery Suit for: HSP RedCat 1/8 1/10 nitro car Item weight: 69g Package Information: Package size: 12 * 3 * 3cm / 4.7 * 1.2 * 1.2in Package weight: 72g / 2.5oz Poly bag package Package include: 1 * Glow Plug Igniter 1 * 1.2V 1800mAh Ni-Cd Battery (Built-in)

Features: Supports Mulitshot Oneshot42 OneShot125. 30A ESC for FPV multicopter and quadcopter. Continue Current: 30A, Burst Current: 35A up to 10S, Input Voltage: 2-6S Lipo. The package includes 4pcs ESC. Great choice for university professors and students who are interested in developing software for multicopter parts. Specifications: Item: 30A Brushless ESC Input Voltage: 2-6S Lipo BEC Output: No Continue Current: 30A, Burst Current: 35A up to 10S Size: 35*18*5mm Weight: 9g Support Damped mode, Oneshot125, Oneshot42 and Multshot Main IC: SILABS EFM8BB21F16, MCU run 48MHz MOS: Both low and high side fets are Nfets Switching speed is very fast, it has dedicated driver chip Package

Description: Material: plastic shell Color:as the picture Output: DC 6V 7.2V 8.4V 9.6V Compatibility: remote control car Stable and reliable. Package included:1 x Remote Control Car Charger Note: 1.Please allow 0.1 cm error due to measurement tools and manual measurements. 2.Because of the difference in light and resolution, the color of each product will be different.

Charger UK Plug 100V-240V for Flytec 2011-5 1.5kg Loading Remote Control Fishing Bait Boat Features: 100% brand new Perfect for Flytec 2011-5 1.5kg Loading Remote Control Fishing Bait Boat Fast charge, protect the battery Light weight and portable to carry Made of high quality plastic Specification: Product name: Charger Main Material: Plastic Input voltage: AC 100V-240V Output: 8.4V/1A Color: Black Plug: UK Suitable: Flytec 2011-5 Fishing Bait Boat Package Information: Package size: 9.5 * 7.2 * 2.8cm / 3.7 * 2.8 * 1.1in Package weight: 67g / 2.4oz White box package Package List: 1 * Charger UK Plug

This Police Car Light is special for RC car models, with strobing-blasting Flashing fast-slow Rotating Mode. Features: RC CH3 Controling Mode. Strobing-blasting Flashing Mode. Fast-slow Rotating Mode. Aluminum alloy base. Specification: Color:Yellow/Blue/Red (optional) Item Number: AX-511BL The use of voltage:4.8~6V Method of use: the power line is connected to the receiver third channel(CH3) Size: 9*15mm Weight: Approx.1g (0.035 oz) Package information: Package size: 13 * 3.8 * 1.5cm / 5.11 * 1.49 * 0.6in Package weight: 12g / 0.43 oz Package List: 1 * AX-511BL Police Car Light

The packages include 4pcs wheel rim, the wheel rim can give good support for the tire. Features: [Aluminum Alloy Material]: The wheel rim is made of aluminum alloy material, strong and durable, not easy to deform. [Support Tires]: Full strong wheels rims hub can give good support for the tire. [Suitable RC Car]: Replacement for 1/10 TRX4 Axial SCX10 90046 SCX10 III AXI03007 AXI03003 RC car. [Easy to Install]: Easy to install the wheel rim, RC DIY enthusiast will like it very much. Specifications: Item Name: Wheel Rim Material: Aluminum Alloy Quantity: 4pcs Wheel Rim Inner Diameter: 45mm Wheel Rim Width: 31mm Hexagon Length: 12mm(Side to Side Length) Note: * There could be some deviations