Amplifiers

The Auteur DT is a versatile preamp/DI box ready to suit all of your single-channel recording needs. Thanks to 60 dB of Chicago console-style gain and 1/4” and XLR inputs, Auteur DT will accurately capture and enhance anything you throw at it: the crackling snap of a well-tuned snare — or the thunder, resonance, and decay of a ‘70s acrylic kick drum getting hit hard. Add heat and texture to synths and mix-penetrating presence to vocals. Rest assured — anything you plug into the Auteur DT will sound better coming out of it.Auteur DT exists to capture every bit of sweat equity that goes into your recordings... in fact, bringing out the fully polished potential of your final …

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play, turn your PC into a HIFI source : USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

Power Amplifier

2xMA12070 Fully balanced Class D amplifier ：Each channel of PA3s uses one MA12070 Class D power amplifier chip. This allows separation in layout improving performance and reducing crosstalk. The power is shared across two chips, the heat dissipation is also halved for each chip, improving reliability and extending the lifespan of the product. High output power ：PA3s could output 80W x2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1%，output power will be 65W x2 at 4ohm load. The output power is enough to drive any bookshelf speakers and even some floor speakers. Balanced + Single- ended inputs ：PA3s provides TRS balanced input and RCA single: end- ed input. The u use of

The ES903902M uses the newest ESS patented HyperStream IV Dual DAC technology, and advanced SABRE HiFi architecture. The ES9039Q2M delivers a performance level that will satisfy the most demanding audiophile and pro-audio enthusiast. DL200 is capable of directly sampling PCM digital audio up to 32-bit/768kHz without downsampling. lt also supports Native DSD playback up to DSD512 without conversion. Optical/coaxial input supports DoP64 You can switch between 2 different USB modes in the menu. To use USB2.0, you need to install the driver and support 768kHz/32bit high bit rate audio files. Use the USB1.1 mode to support audio files up to 96kHz/24bit bit rate without driver, and directly connect …

Q1000 power amplifier 2 x 500WStereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Fuse rating - T5A (240V) / T10A (110V)Power max. : 4 Ohms - 2 x 500WPower rms : 4 Ohms - 2 x 250WPower rms : 8 Ohms - 2 x 160WDimensions - 482 x 380 x 88mm (2U)Weight - 9kg

Mini-size 100W high fm output power CB Power: 100W Turn on/off switch Automatic receive/transmit switch Electrode Frequency Range: 3-30MHz Operate Voltage: 12-14Vcc Input Current: 14-20A Input Power: 1-5W Input Power SSB: 2-10W FM Output Power: Max.100W AM Output Power: Max. 150W Output Power SSB: Max.300W Working Mode:FM-AM-CW-SSB Fuse: 2 x 12A Material: Metal colour: As shown Package Contents: 1 x CB Radio Power Amplifier(-300PLUS) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Signal Splitter / Desktop / Number of Channels 2

Brand new NFCA discrete amplifier ▶️ The newly developed NFCA discrete power amplifier reaches a new level of pristine sound processing and reproduction. B200, with its unprecedented 200W performance, will bring you pure auditory enjoyment. Three sets of XLR/TRS balanced inputs ▶️ To utilize the balanced composite interface and construct a balanced playback system, ensure the simultaneous use of two B200 units. 200W output power ▶️ B200 has a powerful output power of 200W, which can meet the needs of more kinds of speakers. B200 provides high/low gain options. You can flexibly choose the appropriate gain according to different environments and equipment requirements.

Integrated Amplifier / Stereo / 3.5mm-In / Bluetooth

Vivolink VL120005 audio amplifier 2.0 channels Home Black

You can connect D10 Balanced to your amplifier/headphone amplifir's input to make D10 Balanced one part of your HIFI system. D10 Balanced will greatly improve sound quality in case playing high resolution files. D10 Balanced is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 Native D10 Balanced will synchronously power on/off with PC. D10 Balanced supports professional ASIO applications. When using ASIO in MAC or Liunx, it can be set in the music playback software. when using ASIO with Windows, you can use the customized driver from Thesycon. D10 Balanced can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not

Mighty 20 mkII Guitar AmpThe Mighty 20 mkII is a complete rehearsal, live and recording amplifier and effects unit for guitarists. The 8" speaker is powered by a 20W amplifier section. Select through 7 channel presets that are fully editable with 8 freely moveable processing blocks including the proprietary TS/AC-HD amp modelling and IR cabinet simulation along with a myriad of gain, EQ and time-based effects to choose from. Each channel preset also has 3 pro scenes for quick switching between settings mid-song. Included with the Might 20 mkII is the NBT-1 Bluetooth adaptor, which can be connected at the rear to enable pairing with a smart phone for audio streaming and deep programming using …

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases (or decreases) the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 50 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

  TOPPING NX1s Hi-Res Digital HiFi Portable Headphone Amplifier AMP   Description: Measured: 8.4cm*5.5cm*1.0cm Weight:78g Power input: DC5V/1A(PC s USB 0.5A) Charge time: 40 hours THD+N: