Amplifiers

Microphone Pre-Amp / 19 Inch Size

Bluetooth 5.1 High-end Chip QCC5125:Bluetooth supports SBC, AAC, APTX, APTX HD, and LDAC, and the corresponding format will be shown on the screen. Adapting 2nd asynchronous XMOS solution supporting more→up to 32Bit/ 768kHz and DSD512. Utilizing the CK-03 clock module used by high-end devices makes the clock jitter of Optical Coaxial as low as USB. Equipped with dual new AK4493S decoding chip, and climbing an unprecedented 0.0001 1% after adjustment repeatedly! Supports Type-C to Type-C,Supports TRS Balanced Output.

Features: 1. 5.1 Surround Sound, High-Power Amplifier, Bluetooth 5.0, Usb Flash Drive Card (Not Included), Dual Microphone Inputs 2. Wireless Bluetooth, Lossless Decoding, Dual Microphone Interface, S more→uper Bass, Karaoke Reverb 3. 5.1 Surround Sound, Cinematic Immersive Experience 4. High-Power Amplifier, Dual Microphones For Karaoke, And Reverberation Adjustment 5. Lossless Decoding Mode, Listen To High-Definition Audio Description: 1. Amplifier type: HIFI 2. Output impedance: 4-16 3. USB: support 4. Microphone: Support 5. FM radio: supported 6. Remote control: supported 7. Bass adjustment: support 8. Amplifier channel: 5.1 9. Rated power: 200W+200W 10. Bluetooth: support 11. SD card: support …

Designed for recording engineers who want an updated take on the classic '73-style unit, the Black Lion Audio B173 mkII is a single-channel preamp with a warm, creamy, 1970s tone. It's suitable for re more→cording vocals, keyboards, guitars, basses, and more. This preamp gives you a half-rack package, with an XLR connection for microphones and a 1/4" jack for line-level or Hi-Z instruments. The output connection is handled by the 1/4" TRS output on the rear of the unit. Package Contents: Manual;Adapter Controls: On/Off;Gain;Output level;Phase;Phantom Power Supply: Adapter Number of Channels: 1 Application: Recording;Studio UK/EU Power supply included: Yes Rackmountable: Yes Compressor: No Battery …

D-series Quad Power AmplifiersQuad digital power amplifier in a lightweight 1U rack-mountable format. An energy-efficient switch-mode power section and class-D amplifiication circuit delivers accurate more→power-on-demand to four independent speaker outputs. Proprietary cool guide technology provides stable temperature management for dependable operation. Each pair of output channels can be separately parallel switched or bridged as a full or part stereo amplifier configuration. For channel A, there is a switchable 120Hz low-pass filter for use with subwoofers and a channels C and D have a switchable stereo pair of 120Hz high pass filters to effectively focus power in full-range cabs operating as …

Super audio reproduction ability with ultra low distortion The E70 uses ESS SABRE flagship DAC ES9028PRO. ES9028PRO has a 32-bit 8-channel HyperStream I1 architecture. In the application of E70, more→every 4 channels are connected in parallel as one channel,achieving high performance and high sound quality at the same time. Brand new IN conversion A brand new IN conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion,lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip. LDAC 24bit96kHz

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB d more→ynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

Dominance reloaded: The 02 series of Reloop''s Dominance amps combines intelligent electronics and qualitative manufacturing adding up to an amplifier solution for gastronomy, business and clubbing. A more→vast protective circuit package avoids unwanted overloading of any kind. With the three different capacity levels for 360, 720 and 960 watt every sound engineer should be able to find the right package.Specs360 watt pro final amplifierOutput rating: 2x 180 W at 4 ohm, 2x 120 W at 8 ohmFrequency range: 10 Hz - 50 kHzDimensions: 482 x 88 x 314 mmWeight: 8.5 kgFeaturesHeavy duty aeratorNovel transistorsLarge, oversized cooling finsOverload protection and short-circuit protectionHigh reliabilityThermal …

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB d more→ynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

Features: -- Two signal inputs: DVD signal and AUX signal -- LINE output, signal output can be connected to active subwoofer or other equipment signal source -- Center surround output, including ce more→nter one, surround two -- With remote control -- bluetooth 5.0 -- With FM radio -- Reverberation, treble, bass, balance -- Support: plug in USB , SD, audio input (Computer/notebook, TV, projector, set-top box, DVD, mobile phone, lapd, etc.), 4 microphone inputs. -- With microphone treble, bass, MID, ECHO, delay, RPT adjustment Specifications: Model: AV-6060BT Size: 360*240*100mm/14.2x9.4x3.9"" Voltage: AC 110V/220V Power: 3000W Channel: 2 Channel Rated frequency: 20KH - 20KHz

CEQ231 2 x 31-band graphic EQThe CEQ231 is a 19" 2U rack mounted dual 31-band graphic equaliser, which allows the adjustment of labelled frequencies via the individual cut/boost faders. Up to 12dB of more→cut or boost for frequencies ranging from 20Hz to 20kHz for ultimate EQ control.2 x 31-band 1/3 octave ISO spacingRF filtered servo-balanced inputsConstant Q each bandBypass switch for EQ comparisonLow-cut switch each channelGain control each channelLED VU meters19" rackmount 2U

Do you have trouble in connecting 2 sets of power amplifier and 8 sets of loudspeakers? Do you have trouble in making 2 sets of power amplifier and 8 sets of loudspeakers to sound at the same time? On more→e strong power amplifier and loudspeaker distribution device is able to solve the above problems. Features: 8 sets of stereophonic loudspeaker, push-button selection to switch output. 8 sets of loudspeakers can be turned on at the same time, and can be individually turned on or off, manual selection. Signal input provides signal no-load protection for the power amplifier. Adopts convenient snap fastener type wiring terminals, able to accept up to 12AWG loudspeaker wires. Input channel supports …

DSD support up to DSD512 native hard resolution, support Native DSD driver. Keep improving,not only good sound quality. Professional shape design with anodized CNC aluminum housing. AKM New AK4493S: more→Using a piece of AKM's new AK4493S, and carefully adjusted to achieve an unprecedented 0.00013%! High performance power filtering system: Built-in high performance power filtering system for optimal performance using only USB port power! The design purpose is: to occupy minimal space on the desktop, it has three placement modes as shown below, in these three placement modes, because it has a built-in digital acceleration sensor, so it will automatically switch the direction of the display.

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achi more→eve better performance and reduction ability than a single chip. Plug and play:turn your PC into a HIFI source USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

S460-WIFI Multi Streaming AmplifierClass-D dual stereo amplifier delivering up to 4 x 60W output with Bluetooth and internet streaming capability. Two internal amplifiers have individual volume contro more→l, allowing different music levels in 2 separate areas. Controlled from an Android or iOS smart phone, the S460-WIFI is compatible with freely available apps to stream music and podcasts directly from a WiFi or wired RJ45 network connection. Embedded internet radio offers high quality digital audio from almost any online radio station or podcast available worldwide. Subscription services can store online playlists which can be cast directly from the internet without requiring the smart phone to …

CNC aluminum shell - Nice appearance,also greatly improved the heat dissipation capacity Chassis Temperature Display - With chassis temperature display, better control sound quality