Amplifiers

A-30 + Wi-Fi & Bluetooth 5.0 Stereo amplifier with Multi-Room 2x35W support. Supported Formats: ALAC;MP3;APE;AAC;WAV;FLAC Width (cm): 13.1 Sample Rate: 192 kHz / 24 bit Signal to Noise Ratio: 91 dB In more→puts: 3,5 mm Jack;Micro USB Power: 35 W;18 W Colour: Grey Impedance: 8 Ohm;4 Ohm Net Weight (kg): 35.0 WiFi: Yes LAN: Yes Bluetooth: Yes Outputs: Speaker OUT Depth (cm): 8.5 Remote Control: Mobile Application;Yes Made in: China USB: Yes Height (cm): 2.7 Type: Multiroom Amplifier Streaming Platform: Spotify;Qobuz;Internet radio;Deezer;Tidal;Napster;Amazon Music Frequency Response: 20 Hz - 20 kHz

Bluetooth 5.1 High-end Chip QCC5125：Bluetooth supports SBC, AAC, APTX, APTX HD, and LDAC, and the corresponding format will be shown on the screen. Adapting 2nd asynchronous XMOS solution supporting more→up to 32Bit/ 768kHz and DSD512. Utilizing the CK-03 clock module used by high-end devices makes the clock jitter of Optical Coaxial as low as USB. Equipped with dual new AK4493S decoding chip, and climbing an unprecedented 0.0001 1% after adjustment repeatedly! Supports Type-C to Type-C. Supports TRS Balanced Output. Support DSD Direct.

The new NFCA amplifier circuit is specifically designed for portable amplifiers. The low idle power consumption allows for extended battery life. This is done while having 0.00007% THD+N and 135dB SNR more→. It's powerful and clean enough for power-hungry full-sized headphones and sensitive IEMs. The NX7 can output 180mW of high power under a load of 300 ohms, and with the help of 3 step gain setting, the small body can easily beat the full-sized headphones. It is worth mentioning that even when the output is 200mW, the load distortion is only 0.00008%. The low gain of NX7 is -13.8dB. When used with high-sensitivity in-ear headphones, there will be almost no trouble of potentiometer bias in the

2-zone Mixer-amplifier + USB/SD/FM/BluetoothMixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/line and 2 line inputs with an integral USB/SD/FM player more→and Bluetooth receiver can be enabled independently to either of the 2 zones. Mic 1 channel has a variable override and switchable phantom power for use with condenser microphones. Designed for installations where independent paging and audio to 2 separate zones is needed.DetailsPower supply 110-230Vac, 50/60Hz (IEC)Power : output 2 x 120W rmsAudio source USB/SD/FM/BT audio playerInputs 1 x mic (XLR), 2 x mic/line (jack), 2 x line (twin RCA)Zone outputs: line 2 x RCAZone outputs: speaker 2 …

【12*CS43131 Decoder Chipset】: The heart of audio dac prowess lies in the utilization of 12 cutting-edge Cirrus Logic CS43131 audio decoding chips. These chips, coupled with a meticulously designed cir more→cuit, achieve an unprecedented distortion level of 0.00006 (-123dB) unweighted, delivering an audio clarity that is truly breathtaking. 【XMOS XU-316 & Gaming dac 】 : Integration of the latest third-generation XMOS XU-316 chipset ensures support for PCM up to 32bit/768kHz and DSD up to DSD256, satisfying even the most discerning audiophiles. DO200PRO has 2 USB modes. The USB1.1 mode is drive free and suitable for gaming console connectivity, such as PS5 or SW.USB2.0 mode for PC, tablets,

D-series Quad Power AmplifiersQuad digital power amplifier in a lightweight 1U rack-mountable format. An energy-efficient switch-mode power section and class-D amplifiication circuit delivers accurate more→power-on-demand to four independent speaker outputs. Proprietary cool guide technology provides stable temperature management for dependable operation. Each pair of output channels can be separately parallel switched or bridged as a full or part stereo amplifier configuration. For channel A, there is a switchable 120Hz low-pass filter for use with subwoofers and a channels C and D have a switchable stereo pair of 120Hz high pass filters to effectively focus power in full-range cabs operating as …

Super audio reproduction ability with ultra low distortion The E70 uses ESS SABRE flagship DAC ES9028PRO. ES9028PRO has a 32-bit 8-channel HyperStream I1 architecture. In the application of E70, more→every 4 channels are connected in parallel as one channel,achieving high performance and high sound quality at the same time. Brand new IN conversion A brand new IN conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion,lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip. LDAC 24bit96kHz

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB d more→ynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

Dominance reloaded: The 02 series of Reloop''s Dominance amps combines intelligent electronics and qualitative manufacturing adding up to an amplifier solution for gastronomy, business and clubbing. A more→vast protective circuit package avoids unwanted overloading of any kind. With the three different capacity levels for 360, 720 and 960 watt every sound engineer should be able to find the right package.Specs360 watt pro final amplifierOutput rating: 2x 180 W at 4 ohm, 2x 120 W at 8 ohmFrequency range: 10 Hz - 50 kHzDimensions: 482 x 88 x 314 mmWeight: 8.5 kgFeaturesHeavy duty aeratorNovel transistorsLarge, oversized cooling finsOverload protection and short-circuit protectionHigh reliabilityThermal …

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB d more→ynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

Features: -- Two signal inputs: DVD signal and AUX signal -- LINE output, signal output can be connected to active subwoofer or other equipment signal source -- Center surround output, including ce more→nter one, surround two -- With remote control -- bluetooth 5.0 -- With FM radio -- Reverberation, treble, bass, balance -- Support: plug in USB , SD, audio input (Computer/notebook, TV, projector, set-top box, DVD, mobile phone, lapd, etc.), 4 microphone inputs. -- With microphone treble, bass, MID, ECHO, delay, RPT adjustment Specifications: Model: AV-6060BT Size: 360*240*100mm/14.2x9.4x3.9"" Voltage: AC 110V/220V Power: 3000W Channel: 2 Channel Rated frequency: 20KH - 20KHz

CEQ231 2 x 31-band graphic EQThe CEQ231 is a 19" 2U rack mounted dual 31-band graphic equaliser, which allows the adjustment of labelled frequencies via the individual cut/boost faders. Up to 12dB of more→cut or boost for frequencies ranging from 20Hz to 20kHz for ultimate EQ control.2 x 31-band 1/3 octave ISO spacingRF filtered servo-balanced inputsConstant Q each bandBypass switch for EQ comparisonLow-cut switch each channelGain control each channelLED VU meters19" rackmount 2U

Do you have trouble in connecting 2 sets of power amplifier and 8 sets of loudspeakers? Do you have trouble in making 2 sets of power amplifier and 8 sets of loudspeakers to sound at the same time? On more→e strong power amplifier and loudspeaker distribution device is able to solve the above problems. Features: 8 sets of stereophonic loudspeaker, push-button selection to switch output. 8 sets of loudspeakers can be turned on at the same time, and can be individually turned on or off, manual selection. Signal input provides signal no-load protection for the power amplifier. Adopts convenient snap fastener type wiring terminals, able to accept up to 12AWG loudspeaker wires. Input channel supports …

The Topping PA3S Class D Power Amp is packed with high-quality features that will boost the sound power of your speakers. The PA3S will connect to 4-8ohm speakers and is equipped with two RCA and TRS more→inputs. Its compact design allows for flexible positioning and houses first-rate capacitors and relays. The Class D amplifier is equipped with two MA12070 chips that generate a power output of 80W x 2 and have a THD+N rating of 1%. Offering an LED-lit front panel you can view the input status of the amp and be notified of any faults. The amp is also home to over-heating protection that will enable long durability and it also has a silver finish that will fit in with your homes character.

Microphone Pre-Amp / 19 Inch Size

Bluetooth 5.1 High-end Chip QCC5125:Bluetooth supports SBC, AAC, APTX, APTX HD, and LDAC, and the corresponding format will be shown on the screen. Adapting 2nd asynchronous XMOS solution supporting more→up to 32Bit/ 768kHz and DSD512. Utilizing the CK-03 clock module used by high-end devices makes the clock jitter of Optical Coaxial as low as USB. Equipped with dual new AK4493S decoding chip, and climbing an unprecedented 0.0001 1% after adjustment repeatedly! Supports Type-C to Type-C,Supports TRS Balanced Output.

Features: 1. 5.1 Surround Sound, High-Power Amplifier, Bluetooth 5.0, Usb Flash Drive Card (Not Included), Dual Microphone Inputs 2. Wireless Bluetooth, Lossless Decoding, Dual Microphone Interface, S more→uper Bass, Karaoke Reverb 3. 5.1 Surround Sound, Cinematic Immersive Experience 4. High-Power Amplifier, Dual Microphones For Karaoke, And Reverberation Adjustment 5. Lossless Decoding Mode, Listen To High-Definition Audio Description: 1. Amplifier type: HIFI 2. Output impedance: 4-16 3. USB: support 4. Microphone: Support 5. FM radio: supported 6. Remote control: supported 7. Bass adjustment: support 8. Amplifier channel: 5.1 9. Rated power: 200W+200W 10. Bluetooth: support 11. SD card: support …