Amplifiers

TOPPING D50 III - 3rd Generation Upgraded Version The D50 III uses 2x ES9039Q2M, one for the left channel and another for the right channel,which delivers higher SNR(132dB), higher dynamic range(132dB), and lower distortion(

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play, turn your PC into a HIFI source : USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

Built-in two latest audio decoder chip CS43131, with well-designed circuitry to achieve an unprecedented performance of 0.00013% (-117dB) distortion! The new third generation XMOS XU-316, PCM support to 32bit/768kHz, DSD support to DSD256. USB support MQA decoding. Bluetooth 5.0 digital audio input, external antenna, longer transmission distance. The clock system uses independent ultra-low clock jitter and ultra-low phase noise crystal as the audio clock. The built-in high-efficiency power supply chip provides sufficient energy for the decoder, and uses multiple low-noise LDO power supplies. Use a large number of audio-specific audiophile-grade resistors and capacitors. Using 1.29" OLED display.…

Integrated Amplifier / Stereo / Output power per channel 35 Watt / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Advantages:- FM radio- Stable signal- Save radio stations- MultifunctionalFeatures:- Made from imported high-quality electronic components- With long discharge time (up to 20 hours)- One-key stereo/mono conversion- Adjustable electronic volume 16 levels- Independent AUX (audio) 3.5MM input interface- Independent MIC (microphone) input interface- Set TF card interface to play music- With independent key lock function- Adjustable frequency 60-108MHZ (fixed frequency can also be customized)- Transmitting distance: 250 meters in radius, 500 meters in diameter- Dedicated transmitting antenna with stable signal is not easy to be interfered, and the confidentiality is better- A good helper for creating …

The Topping PA3S Class D Power Amp is packed with high-quality features that will boost the sound power of your speakers. The PA3S will connect to 4-8ohm speakers and is equipped with two RCA and TRS inputs. Its compact design allows for flexible positioning and houses first-rate capacitors and relays. The Class D amplifier is equipped with two MA12070 chips that generate a power output of 80W x 2 and have a THD+N rating of 1%. Offering an LED-lit front panel you can view the input status of the amp and be notified of any faults. The amp is also home to over-heating protection that will enable long durability and it also has a silver finish that will fit in with your homes character.

Fully balanced structure, Pure sound quality ▶️ The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 II/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC ▶️ The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4Ω load, THD+N

TOA A-2030DD audio amplifier 1.0 channels Performance/stage Black

Features: - Support 4 way microphone input - LED display - Tack output With EQ - Reverberation, fine tuning, balance, SD, USB interface. Specifications: Model: 325BT Size: 26 * 29 * 10cm Rated voltage: 110-240V 50 / 60Hz Rated power: 1200W Peak: 2000W Rated frequency: 20KH - 20KHz Signal to noise ratio: 90dB Standard impedance: 4 to 16 ohm Type of power amplifier: AV power amplifier Channel: 2.0 channel Total harmonic distortion: ≤ 0.5% Signal input sensitivity: 200mv (± 30mv) Microphone input sensitivity: 9 mv (± 2mv) Recording level output: 1V Auxiliary level output: 1V Support:USB Disk/Max 64GB SD Card(Not included) Color: Black Packaged included: 1 x Audio

DX7 Pro+ uses ESS SABRE ES9038PRO, with 32bit Hyper-stream architecture, achieves ultra-high performance in the audio field. Each channel of the DX7 Pro+ will be arranged in parallel by 4 conventional balanced channels. This makes the performance of DX7 Pro+ even better. A brand new I/V conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip. Close to physical limits: The ability of DX7 Pro+ to restore music has reached to THD+N

German Infineon's New Silicon Carbide Amplifier Chip Mini handy Design, More Flexible. High quality gold-plated audio connectors Whole aluminum alloy CNC shell. More generous and better heat dissipation Electronic volume control. Eliminate the noise caused by potentiometer. Preset multiple EQ sound mode

Complete installation set comprising a WA-215 wall amplifier with inbuilt media player and Bluetooth, and a pair of 165mmØ (6.5”) 15W ceiling speakers with 10m speaker cable. Quick and easy to install, these in-ceiling speakers provide a full background music system for discreet installation in the home or commercial premises. Features: Bluetooth connectivity Touch operated control panel Audio playback from USB or microSD Inbuilt FM tuner IR remote control Specifications: Power supply: 100-240Vac, 50/60Hz (Euroblock terminal) Rated output power: 2 x 15W @ 8 Ohms Minimum impedance: 8 Ohms (each output) Bluetooth version: 4.1 Cutout: 170mmØ (each speaker) SPL: 98dB (1W, …

Welcome Mini amplifier speaker TF card U disk USB radio DC 12V/110V bluetooth power amplifier US Features: * Amplifier Mini high-fidelity digital bluetooth audio power amplifier. * With treble, bass and volume control, it is very easy to use. * Low distortion provides clearer, more powerful and more powerful sound. * All-in-one wireless remote control. * It has the characteristics of low calorific value, light weight and long use time. * The amplified power amplifier can be connected wirelessly to connect multiple sets of speakers wirelessly. * With color screen and powerful digital power amplifier. * The power supply is compatible and can be used under …

Qualcomm latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD, SBC, AAC. The 2nd generation XMOS solution supports DoP256 and native DSD512, and PCM supports up to 32bit/768kHz. 4x high-end dual op-amp OPA1612 and a large number of audio grade components. All input ports (except Bluetooth) support DSD transmission, coaxial and optical supports DoP64. Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits.