Amplifiers

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play, turn your PC into a HIFI source : USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

Microphone Pre-Amp / Desktop / Number of Channels 2

Function: - Two signal inputs: DVD signal and AUX signal - LINE output, signal output can be connected to active subwoofer or other equipment signal source - Center surround output, 5 channels including center one, surround two - 115V/230V Power conversion - With remote control - bluetooth 5.0 - 5-band EQ mixer - Reverberation, fine tuning, balance - FM audio and playback function - Support: plug in U disk, audio input (DVD/VCD/CD/MP3/ computer, etc.) - SD, USB interface, 2microphone inputs. - With microphone reverb and delay adjustment - Power off memory playing - Switch machine horn protection function - Short circuit protection function - Overload protection function Specifications:

Supplied with 35 m loop wire for setting up an induction loop, SCART adapter, PSU Integrated alarm signal can be switched on additionally Dynamic compressor. 2-way tone control Adjustable input sensitivity for line and microphone LEDs for power, signal/PEAK and loop current

Super audio reproduction ability with ultra low distortion: The E70 uses ESS SABRE flagship DAC ES9028PRO. ES9028PRO has a 32-bit 8-channel HyperStream II architecture. In the application of E70, every 4 channels are connected in parallel as one channel, achieving high performance and high sound quality at the same time. Brand new IN conversion: A brand new IN conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics SO that we are able to squeeze out the last bit of performance of the DAC chip. Excellent performance: THD+N of E70

Support Bluetooth: With LDAC, APTX/HD, SBC, AAC supported. Support MQA& MQA-CD, DSD512, LDAC. When the analog sound is converted to a digital signal,time blurring will occur, blurring transient signals over time. As a result, our ears cannot tell where a single sound comes from, the comparison between recorded music and "live performances”is unremarkable! MQA can eliminate this distortion and create a true 3D sound field, which is different from any sound you have ever heard. Uses dual high-end ES9039MPRO D/A chips from ESS Company, and uses all 8 channels, with a total of 11pcs OPA1612A op-amp. USB utilized the 3rd generation XMOS XU316, a true 32-bit USB solution, supports DOP and

KAD-2 Digital stereo amplifierThis compact digital amplifier has four selectable inputs, two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume, tone and echo effects are adjustable through rotary controls. Master Volume, Treble and Bass rotaries control tone and overall output. A multi-purpose amplifier suitable for both domestic and commercial use.Efficient Class D digital amplifierA high output power of 55W max. per side3.5mm stereo line input on the front panel3 stereo line inputs on RCASpring clip speaker output terminals2 x 6.3mm microphone inputs

Module model: BTM525 Bluetooth chip: QCC5125, 32m SPI flash built in the module Bluetooth version: 5.1 supply voltage: 3.0-4.3v Type: I2S Module size: 13mm x 18mm x 2.5mm Material:ABS colour:As shown Package Contents: 1 x Stereo Audio Module Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

The Q Acoustics AVA Black Stereo Amplifier featuring Bluetooth stands as the central hub within a dynamic 2.1 music and home cinema setup. Specifically crafted for the 7000LRi Speakers this stereo AV amplifier delivers an impressive 50 watts of power per channel. Not only does it aesthetically align with the Q Acoustics 7000LRi Speakers but it also offers a plethora of connectivity options including an optical input for your TV 3.5mm Jack and the convenience of Bluetooth pairing. Moreover the inclusion of MoviEQ a dedicated EQ system elevates your cinematic experience by finely tuning the audio for optimized movie performance immersing you deeper into the on-screen action. Experience unparalleled …

This WIFI digital amplifier simplifies room sound with two speakers, eliminating the need for complex cabling and music source. It is small and compact. Uses a WIFI network connection. It allows you to play music from local, network and Internet repositories and services, Internet radio, including podcasts. Includes USB / MP3 player with Bluetooth connection. It has a stereo line input (2x RCA), optical (Toslink) input, output to an active subwoofer (RCA) and headphone output (3.5 mm jack). A remote control is supplied to control the device. We also recommend using the AUDIOCAST or SMART SONIX application to control and set up Internet radios. With these applications, you can control the switching …

Fully balanced structure,Pure sound quality The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 I/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4 Q load, THD+N

Signal Processor / 19 Inch Size / Processor Type Graphic EQ / Number of Channels 2 / Rack Height 3 RU

Description: With ES 9038Q2M high-end decoding chip, it has low distortion and high cost performance. With XMOS/XU208/USB chip and CSR8675 high-end lossless bluetooth-compatible chip, it has strong transmission performance and wide compatibility. With high-quality PCB board, it is not easy to short circuit, oxidize and it has a long service life. Made of aluminum alloy material, the decoder is durable. The length of the product is 17.8cm, and the width is 11.4cm, the height is 3.3cm. It is suitable for car, home, office,etc. Item Name: Decoder Material: Aluminum Alloy Model: D01 Plug Type: EU Plug Bluetooth: 5.0 Chipset: STM32+XMOS XU208+ES9038Q2M+TPA6120A2DWPR+LME49720NA+CSR8675 Level

Compatible with DSD256 and PCM384 - D10s is compatible with 16-32bit/44.1-384kHz and DSD64 - DSD256(support both Dop and Native) XMOS XU208 and Customized Driver - D10s use XMOS XU208 for USB interface and use customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.And use ESS ES9038Q2M to make THD+N as low as 0.0002%@1kHz Automatic Power On/Off - Although the USB port support power after PC has shutdown,D10s still will synchronously power on/off with PC Replaceable OP - It has OP amp socket,DIYer could change the OP amp to get different sound.Notice:D10's electrical parameters will change if use other OP Multiple Applications …

PA Amplifier | RMS output: 2x 100 W @ 8 Ohm / 2x 150 W @ 4 Ohm | 2 Channels | 2U | 19" rack mountable | Metal | BlackA semi-professional 2x 150 W PA amplifier which fits standard 19” rack cabinets. This amplifier is ideal for advanced DJs, who desire excellent product reliability. A built-in cooler provides good ventilation and a peak level indicator enables control of the output level. For maximum flexibility there is a choice of various speaker connections such as a lockable speaker connector, binding posts or XLR.Details Colour Black Material Metal Power source type Mains Powered Power plug UK Power cable length 1.50 m Power cable side A UK Height 95 mm Power cable …

Compatible with DSD256 and PCM384 - D10s is compatible with 16-32bit/44.1-384kHz and DSD64 - DSD256(support both Dop and Native) XMOS XU208 and Customized Driver - D10s use XMOS XU208 for USB interface and use customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.And use ESS ES9038Q2M to make THD+N as low as 0.0002%@1kHz Automatic Power On/Off - Although the USB port support power after PC has shutdown,D10s still will synchronously power on/off with PC Replaceable OP - It has OP amp socket,DIYer could change the OP amp to get different sound.Notice:D10's electrical parameters will change if use other OP Multiple Applications …

This kind of DMX512 optical splitter functions as DMX512 distribution amplifier, which is small in size and light in weight that it is easy for you to carry. It is specially designed for connection of DMX512 receivers like dimmers, par lights, moving lights, etc. in star configuration It amplifies the DMX512 signal, making the DMX512 data transmission more reliable. With 1000V isolation between input and output and between any individual outputs, each interface also has over-current protection, so all of these will maximize the protection of your console and lighting. Features: MINI SIZE AND LIGHT WEIGHT: Its mini size and light weight ensure that you can carry easily. EASY INSTALLATION: Simple …