Amplifiers

Hi-Fi stereo amplifier. Bluetooth receiver. USB/MP3 player. FM radio. Echo microphone inputs. Digital audio input to connect to a TV. Aluminium panel. Remote control for player. POWER: 230 V AC, 350 W, RESPONSE: 20-20,000 Hz, S/N RATIO: >85 dB, DISTORTION: Harmonic: < 0.5% at 1 kHz, INPUTS: 3 stereo aux: DVD/AUX/CD, 2 x RCA, 17,000 Ω 300 mV RMS, 1 stereo aux, 3.5 mm jack, 15,000 Ω 300 mV RMS on front panel, 1 digital audio, TOSLINK and RCA, 2 balanced mics, 6.3 mm jack, 900 Ω 9 mV RMS, OUTPUTS: Speakers: Main L/R, 4-16 Ω screw or banana terminals, PROTECTION: Temperature, short circuit and overload
MP3 / Line In: Yes
Inputs: RCA;AUX;Jack 3,5 mm;Jack 6,3 mm (MIC/Line)
Radio: FM
Net Weight (kg): 4.2
Depth (cm): 27.6
EQ: No
SD Slot: No
Battery Operation: No
LAN: No
Impedance: 16 Ohm
WiFi: No
Power Supply: 230V
Outputs: Speaker OUT
Number of Channels: 2
Colour: Black
Width (cm): 33.0
USB: Yes
Bluetooth: Yes
Microphone Input: Yes
Type: Amplifier
Package Contents: Power Cable;Manual
Power: 120 W
Signal to Noise Ratio: 70 dB
Frequency …

The Madison MAD1000 is a compact and affordable stereo amplifier that delivers up to 2x30W of power RMS at 4 ohms. It features a 30-20kHz frequency response, signal-to-noise ratio of >77dB, and bass, treble, and volume controls. The amplifier also includes Bluetooth connectivity for wireless music streaming from your smartphone, tablet, or other Bluetooth-enabled devices. Key features:Compact and portable design: The amplifier is only 244x202x67mm and weighs 2.9kg, making it easy to transport.Powerful audio: The amplifier delivers up to 2x30W of power RMS at 4 ohms, which is enough to drive most bookshelf speakers.Wide frequency response: The amplifier covers the frequency range of 30Hz to 20kHz,…

RMS-series Multi Zone 100V Amplifiers


The RMS605 is a Multi-channel slave amplifier with 5 x 60W outputs for 100V, or 4-16Ohm speakers.
Each amplifier channel has its own independent line input, which can be switched to a global auxiliary, providing the option of the same input to several of the amplifier channels if required.
Paging microphone input is always live to all channels for voice alerts, and a 24V mute terminal can be connected to an alarm panel for emergency evacuation override.
Class D circuitry design and efficient toroidal transformers have enabled for a design which fits into a 1U rack-mount housing.
The RMS605 can be applied as a high power slave amplifier or equally …

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Made in: Germany
UK/EU Power supply included: No
Type: DI Box
Battery Operation: Yes
Power Supply: 48V Phantom

Professional active direct box that allows connection of an instrument, line or speaker level signals to a mixer or other balanced input. It features high-impedance single-ended 1/4” and XLR inputs that are buffered and converted by very low-noise active electronics into an isolated balanced low-impedance signal source. It has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output – therefore it delivers a very clean, neutral sound with a wide variety of signal sources and over long signal runs even in high noise environments. Direct box features Input Attenuator switches that allow for a wide range of s…

The Radial JDI Duplex is a full-feature, stereo passive direct box designed to enhance connectivity, reduce noise, and simplify the hectic life of the touring professional, broadcast engineer or AV integrator. It is plug-and-play easy to use while delivering the utmost sonic quality. Like the Radial JDI, the Duplex employs two high-performance Jensen audio transformers with the same pristine audio signal path that has made the JDI the industry standard. It features exceptional signal handling with virtually zero phase shift or harmonic distortion, while remaining linear across the entire audio spectrum. When driven to extremes, the natural transformer saturation and resulting warm Bessel curve …

DI box pedal. Symmetrical/unsymmetrical output, Gain switch, Speaker simulation. Metal housing. True Bypass. Power: optional 9V DC power supply. Dimensions: 93.5 mm (L) × 42 mm (W) × 52 mm (H), Weight: 140 g
UK/EU Power supply included: No
Made in: China
True Bypass: Yes
Type: DI Box
Rackmountable: No
Power Supply: 9V;Adapter