Amplifiers

Four-chip decoding for superior sound：The DL100 is capable of directly sampling 32bit/768kHz PCM digital audio without down sampling. lt also supports DSD256 native DSD playback without conversion.Optical and coaxialinputs support DOP 64. Newly upgraded headphone amplification circuitry：Adopts self-developed independent amplification circuit for excellent performance. Performance compared to the previous generation of CS43131 products, the output power increase of about 16 times at 300Ω. USB Dual Mode 2.0/1.1: There are 2 different USB modes that can be switched within the menu, using USB2.0, driver installation is required to support high sample rate audio files up to 768kHz/32bit. Using USB1.…

The Topping PA7 Plus Class D Power Amplifier is a step up from the PA7 allowing for a more premium audio output. Equipped with two channels this amplifier delivers up to 165W of power to an eight-ohm load; primed and ready to boost most stereo setups. At the heart of the PA7 Plus is the Class D circuit design chosen by Topping for its efficiency and superior performance at this scale. This fully balanced structure reduces noise during transmission and achieves THD+N levels below 0.0003 per cent. The result is a clean and powerful audio output that will elevate your favourite songs. With a dynamic range of 124dB and a frequency response of 20Hz-40kHz the PA7 Plus is suitable for a wide range …

A-30 + Wi-Fi & Bluetooth 5.0 Stereo amplifier with Multi-Room 2x35W support. Supported Formats: MP3;AAC;ALAC;APE;WAV;FLAC LAN: Yes Width (cm): 13.1 Signal to Noise Ratio: 91 dB Power: 35 W;18 W Height (cm): 2.7 Outputs: Speaker OUT Impedance: 4 Ohm;8 Ohm Sample Rate: 192 kHz / 24 bit Type: Multiroom Amplifier WiFi: Yes Net Weight (kg): 35.0 Colour: Grey Depth (cm): 8.5 Made in: China Bluetooth: Yes Inputs: 3,5 mm Jack;Micro USB Remote Control: Mobile Application;Yes USB: Yes Streaming Platform: Internet radio;Amazon Music;Spotify;Tidal;Napster;Deezer;Qobuz Frequency Response: 20 Hz - 20 kHz

TOA A-3612D audio amplifier Black

Fully balanced structure, Pure sound quality ▶️ The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 II/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC ▶️ The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4Ω load, THD+N

American imported TI. power ampliftier. Digital amplifier chip TPA3118. High current adapter adapts to the dynamic response of audio. Extremely small size, more flexible placement. Short signal-path, high sound quality design. NO POP noise ]POP sound -control circuit.

Q600 Series Stereo Power Amplifiers Stereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers. 6.3mm jack or RCA inputs SPK, 6.3mm jack or 4mm post outputs Fan cooled 19" rack-mountable (2U) Power supply 230Vac, 50Hz (IEC) Frequency response 20Hz - 20kHz Input connectors 6.3mm jack, RCA (L+R) Input sensitivity 775mV, 10k Ohms S/N ratio >98dB …

Features: Ultracompact lightweight hum eliminator, has a tough, rugged metal housing. This device breaks the ground loop safely, to remove 60Hz AC hum caused by ground loops. It automatically converts signal(unbalanced to balanced) with no any signal loss, for clear sonic quality. Passive noise canceller can work without battery or external power, convenient to use. 1 XLR/6.35mm channel, 1 XLR/6.35mm channel, 1 RCA channel, 1 3.5mm channel are equipped. Specifications: Material: ABS + Metal Color: Black Product Weight: 450g / 15.87oz Product Size: 11.5*10*3.7cm / 4.52*3.93*1.45in Package Weight: 570g / 20.10oz Package Size: 20*18*5.5cm / 7.87*7.08*2.16in Note: Simultaneous multichannel input …

Digital-to-Analogue Converter / Max Sample Rate 384 kHz / Bitrate 32 bit / Bluetooth

Brand new I/V conversion： New IV conversion circuitry is designed to give you higher quality audio playback. Our circuitry uses an exclusive design that provides lower distortion and noise while occupying a smaller volume. We strive to demonstrate the full performance of our DAC chips to bring you a more superior audio experience. Bluetooth 5.1 transmission: D70 Pro SABRE supports LDAC / aptX-Adaptive I aptX HD I aptX 1 AAC I SBC audio encoding, allowing high quality audio to be transmitted wirelessly for a better sound experience. Plug and play: D70 Pro SABRE has wide compatibility and can be used on multiple operating systems, such as Windows 10, Windows 11, MAC, Linux, and

Vivid, spacious sound, bold looks, and elevated tone from the smart amp that started it all. Want a compact home rig that truly rocks? You’ve come to the right place. Jam, play and practice more with millions of songs. Create a customized look with your own grille design. Access over 50,000 tones powered by award-winning deeply powerful BIAS Tone Engine.Simply start to play and the Spark amp and app work together to learn your style and feel. Then Spark generates authentic bass and drums to accompany you in real time. It’s a smart virtual band that’s always ready to jam! Choose any song. Spark’s smart app will auto display its guitar chords in real time as you play. Easy …

Fully balanced ▶️TOPPING PA7 Plus utilize a newClass D amplifier circuit with a variety of exclusive optimization techniques, which has powerful low distortion performance and power output. These technologies ensure a clearer, cleaner, deeper sound without any background noise. In addition, the balanced structure is able to reduce noise during transmission, thus enabling better performance of the audio source and avoiding wasted performance during transmission. Distortion is as outstanding as DAC ▶️ The distortion performance of PA7 Plus is matching good performing DACs. The distortion stayed extremely low before clipping. This ensures consistent listening pleasure across volume

Brand new I/V conversion： New IV conversion circuitry is designed to give you higher quality audio playback. Our circuitry uses an exclusive design that provides lower distortion and noise while occupying a smaller volume. We strive to demonstrate the full performance of our DAC chips to bring you a more superior audio experience. Bluetooth 5.1 transmission: D70 Pro SABRE supports LDAC / aptX-Adaptive I aptX HD I aptX 1 AAC I SBC audio encoding, allowing high quality audio to be transmitted wirelessly for a better sound experience. Plug and play: D70 Pro SABRE has wide compatibility and can be used on multiple operating systems, such as Windows 10, Windows 11, MAC, Linux, and

DSD support up to DSD512 native hard resolution, support Native DSD driver. Keep improving,not only good sound quality. Professional shape design with anodized CNC aluminum housing. AKM New AK4493S: Using a piece of AKM's new AK4493S, and carefully adjusted to achieve an unprecedented 0.00013%! High performance power filtering system: Built-in high performance power filtering system for optimal performance using only USB port power! The design purpose is: to occupy minimal space on the desktop, it has three placement modes as shown below, in these three placement modes, because it has a built-in digital acceleration sensor, so it will automatically switch the direction of the display.

2-zone Mixer-amplifier + USB/SD/FM/BluetoothMixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/line and 2 line inputs with an integral USB/SD/FM player and Bluetooth receiver can be enabled independently to either of the 2 zones. Mic 1 channel has a variable override and switchable phantom power for use with condenser microphones. Designed for installations where independent paging and audio to 2 separate zones is needed.DetailsPower supply 110-230Vac, 50/60Hz (IEC)Power : output 2 x 120W rmsAudio source USB/SD/FM/BT audio playerInputs 1 x mic (XLR), 2 x mic/line (jack), 2 x line (twin RCA)Zone outputs: line 2 x RCAZone outputs: speaker 2 …