Amplifiers

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Type: DI Box
Battery Operation: Yes
Power Supply: 48V Phantom
UK/EU Power supply included: No
Made in: Germany

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Channels:1, Inputs: 1, Input connectors: 6.3 mm Jack, Max. input level: + 54 dBu. Input impedance:
Made in: Germany
UK/EU Power supply included: No
Type: DI Box

P44800 amp 2 x 400W + 800W sub

2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.
Mono summed sub output (can be full range)
Active crossover with variable frequency
Stereo full range output
Power rms @ 8 Ohms - 250 + 250 + 500W (sub)
Power rms @ 4 Ohms - 400 + 400 + 800W (sub)
Weight - 21kg
Fuse rating - F12A

Microphone preamplifier for connecting up to 2 microphones to one line input of a hi-fi system, an amplifier or a mixer. Stereo or 2 x mono, Wide frequency range, Black metal case, Supplied with plug-in PSU.
Made in: Taiwan
Battery Operation: No
Power Supply: Adapter
UK/EU Power supply included: No

Microphone Pre-Amp / Desktop / Number of Channels 1

Microphone Pre-Amp / Foot Pedal / Number of Channels 1

DI Box

Digital-to-Analogue Converter

Passive stereo direct box. MDB Series direct boxes offer excellent noise performance and transparency. Whether you are in the studio or performing on stage, your instruments will always sound as good as they do at the source. Suitable for stereo sources like keyboards and media players. 2 x high-impedance 6,3 mm jack inputs with thru outputs. 2 x balanced XLR outputs with ground lift. Ultra low noise and distortion. -15 dB pads ensures distortion-free performance when connecting to high-output sources. 2 x parallel Thru outputs. Built-Like-A-Tank construction - From the inside out, MDB Series direct boxes are built to last. Thick steel chassis, impact resistant corners, and long-wearing jacks …

From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage. Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with Built-Like-A-Tank™ construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes. With four models to choose fr…

From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage. Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with Built-Like-A-Tank™ construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes. With four models to choose fr…

Digital-to-Analogue Converter

Hybrid tube stereo Hifi amplifier with built-in USB MP3 player and Bluetooth module. It also contains a 2 line stereo inputs. Electron tubes produce clearer and warmer sound than modern transistors. Includes bass, treble (+/- 10dB) corrections, overall volume and input switch: CD, Bluetooth / USB, DVD.
Input impedance: 47kOhm
Input sensitivity: 300mV
Signal to noise ratio:> 80 dB
Harmonic distortion:

Acoustic guitar preamp/DI with saturation and compression EQ. Analog saturation: Often used by studio engineers in post-production, saturation adds warmth, dimension, and pleasing harmonics while smoothing the signal for an enhanced mix. The Session DI’s proprietary saturation is voiced specifically for the acoustic guitar and transports studio analog warmth and inspiring playability to the stage. Compression EQ: Unlike standard compression that can squash the entire range of your signal, the Session DI’s Comp EQ features 3 narrowly focused bands of compression that tame common problematic frequencies and uncover the voice of your guitar. The low, mid, and high frequency compressors are esse…

Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Colour: Black.
UK/EU Power supply included: No
Made in: China
Battery Operation: Yes
Type: DI Box

From the portable desktop-level unit M17, the portable desktop-grade DAC and amp Q7, to the more portable yet desktop-capable M15S, audiophiles’ warm reactions to these models prove many love desktop-level audio gear. After being successfully applied to the three high-end models, the desktop mode will now evolve and be applied to audio dongles. The FiiO KA13 mini desktop amp features a desktop mode to fully unleash its performance.
With two high-performance yet highly efficient CS43131 DAC chips and two low-noise SGM8262 op-amps, this truly “dual-core” golden combo brings excellent performance. Rediscover your music collection again full of newly discovered details with the KA13.
The KA13 f…

Summing Amp effect pedal. The device can combine two signals into one mono signal. It is equipped with one foot switch, two inputs and one output. Thanks to its features, it can send two signals to one amplifier or add a stereo signal to mono. The effect has a robust metal construction and is powered by a 9V adapter (not included).
Power Supply: 9V;Adapter
UK/EU Power supply included: No
Made in: USA

Headphone Amplifier / Number of Channels 6

Enhanced Design and Functionality - The hip-dac 3, now available in a Titanium Shadow hue and encased in a sleek Aluminium frame, is not only visually striking but also encompasses a range of updated features and circuit enhancements, such as new metal film capacitors and an updated GMT circuitry, to elevate your audio experience.
Advanced Connectivity and User-friendly Controls - Equipped with two USB-C ports for simplified cable management, the device facilitates clear and high-quality audio playback and allows simultaneous charging. Furthermore, user-friendly controls such as a switch to activate iFi's iEMatch technology and LEDs that indicate the format and sample rate of the incoming audio …

3.5mm and 4.5mm Dual Output for maximum compatibility with a wide range of wired headphones and earphones
Supports LDAC and aptXHD for High quality Bluetooth Sound from smartphones, tablets, PCs and portable gaming devices
Delivers outstanding, full high-resolution sound via Plug & Play USB DAC connection
Built-in high-quality microphone to ensure crystal-clear voice quality and stability, ideal for taking calls when working, gaming, or travelling
Dedicated Car Mode to enjoy high-quality DAC/AMP sound effortlessly while at the wheel

A Pristine, Compact Sound Amplifier You Build Yourself
The HA-S is a Nutube-equipped DIY Headphone amp kit that will let you enjoy the highest quality audio anywhere. No soldering is required, so even if you are new to the world of DIY, you will be able to assemble the HA-S to add a warm, analog tube-driven signal boost to any sound source in no time!
Weight (g): 110.0
Battery Type: AA
Battery Operation: Yes
Impedance: 10 Ohm
Power Supply: None, Only Battery Operated
UK/EU Power supply included: No
Colour: Black
Type: Headphone Amp
Controls: Volume
Made in: Japan
Outputs: Jack 3,5 mm
Inputs: Jack 3,5 mm

PERFORMANCE - Greatly improves headphone sound from any device with a USB output.
VERSATILITY - Connects easily to USB-C ports. (Adapter for USB-A ports also included)
FEATURES - ES9219 Sabre DAC chip with Quad DAC+ technology, 32-bitHyperStream III DAC architecture and Time Domain Jitter Eliminator. Also supports Supports hi-res audio up to 32-bit/384kHz PCM, DSD256 and MQA.
HIGH QUALITY - Gold-plated 3.5mm headphone socket, silver-plated copper conductors, twisted for high signal purity.
CONNECTIONS - USB-C Input to 3.5mm Headphone Jack.
INCLUDES, 1 x GO link, 1 x Quick Start Guide, 1 x USB-A to USB-C adapter, 1 x USB-C Charging Adapter 1 x Instruction Card…