Batteries for Drones & RC models

The Driver is an interesting part to experience DIY delight, it comes with decals, just exert your imagination to create an?unparalleled?RC CAR DRIVER Features: Size: 70 * 60 * 45mm, weight: about 36g. It is tailored for Any RC Car, RC delight is unlimited. Comes with decals, just exert your imagination to create an?unparalleled?RC CAR DRIVER. Neck, shoulders, and waist all pivot, and the knees are hinged to suit different vehicles. Specifications: Brand Name:?Killerbody? Item Name:?Driver Color: Transparent Material: ABS Weight: 36g Size: 70 * 60 * 45mm Tailored for: Any RC Car Note: There could be some deviations due to manual measurement or slight color difference as the result of the shooting …

This is Metal Gear Digital Servo, it uses high-precision potentiometer with new design, and accuracy and linearity have been greatly improved, therefore, the servo has high quality and performance and can be commonly used in 1/10 remote control drift cars. It is worth for you to have it, come on. Features: High performance programmable digital?standard servo. The maximum torque is up to 8.2kg.cm (6.0V). High-precision steel gears with hard anodizing. The middle case of the servo is made of aluminium, it can enhance the heat dissipation and ensure servo motor work well. It can be commonly used in 1/10 remote control drift cars. Specifications: Brand name: JX?PDI-6208MG Item name: Metal Gear …

Features: iMAX B6 AC RC charger 80W balance charger. Max. charge power 80W, max. discharge power 5W. Suitable for NiCd / NiMH battery cell count: 1~15 cell, Li-Ion / Polymer cell count: 1~6 series. Safe to use, reverse polarity protection, short circuit protection, overcharge protection, over-temperature protection, over current protection. Specifications: Oeration Voltage Range: DC 11.0 ~ 18.0 Volt or AC 100V ~ 240V 50/60Hz Circuit Power: AC to DC adaptor (DC 11.0 ~ 18.0V / 5A) Max. Charge Power 80W Max. Discharge Power 5W Charge Current Range : 80w: 0.1~6.0A 50w :0.1-5.0A Discharge Current Range : 80W:0.1~2.0A 50W:0.1-1A Current Drain for Balancing Li-Po : 300mAh/cell NiCd / NiMH battery …

The rechargeable HSP nitro starter glow plug igniter with battery charger will bring much convenience for you to start 1/8 1/10 nitro car. Features: Light weight and portable to carry High quality and durability in use Rechargeable 1.2V 1800mAh Ni-Cd battery With battery charger brings much convenience Suit for HSP RedCat 1/8 1/10 nitro car Specifications: Item name: Glow plug igniter and charger Material: Aluminum alloy Battery: rechargeable 1.2V 1800mAh Ni-Cd battery Battery charger: US plug Suit for: HSP RedCat 1/8 1/10 nitro car Item weight: 109g Package Information: Package size: 13 * 10 * 4cm / 5.1 * 3.9 * 1.6in Package weight: 115g / 4.1oz Polybag package Package List: 1 * Glow Plug …

The rechargeable HSP nitro starter glow plug igniter will bring much convenience for you to start 1/8 1/10 nitro car. Feature: 100% brand new Light weight and portable to carry High quality and durability in use Rechargeable 1.2V 1800mAh Ni-Cd battery Suit for HSP RedCat 1/8 1/10 nitro car Specifications: Item name: Glow plug igniter Material: Aluminum alloy Battery: rechargeable 1.2V 1800mAh Ni-Cd battery Suit for: HSP RedCat 1/8 1/10 nitro car Item weight: 69g Package Information: Package size: 12 * 3 * 3cm / 4.7 * 1.2 * 1.2in Package weight: 72g / 2.5oz Poly bag package Package include: 1 * Glow Plug Igniter 1 * 1.2V 1800mAh Ni-Cd Battery (Built-in)

This LED program box is for programming HobbyWing brushless ESCs. Its friendly interface makes ESC programming easy and quick. It's compact, portable and very applicable for field use. It works with many types of HobbyWing products. Feature: The LED program box is for programming HobbyWing brushless ESCs.? Its friendly interface makes ESC programming easy and quick. It's compact, portable and very applicable for field use. It works with Platinum V1/V2 FlyFun V5 XeRun EzRun QuicRun SeaKing series. Specifications: Working Voltage: 4.8-8.4V Size: 88 * 58 * 14mm Weight: 40g Package information: Package size: 15.5 * 9 * 3.5cm / 6.1 * 3.5 * 1.4in Package weight: 77g Gift box package There might be …

Descriptions: Can be synchronized output control 4 servos and used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes With PPM signal test function in the display, the input PPM signal changes while the input the PPM signal synchronization output to the servo Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle, frequency 50Hz, rotary potentiometers to decrease or increase the width of the output pulse. Button the Select (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) …

Features: Tough, aluminum exterior with protective finish Durable, lockable latches High-density foam interior Storage compartments for accessories Protective plastic feet and table pads Comfortable grip handle Suitable for Futaba JR Spektrum Walkera Esky Transmitter Convenient for outdoor carrying Package size: 36 * 28 * 14cm / 14.4 * 11.2 * 5.6 in Package weight: 1400 g / 3.08 lb Note: Transmitter is not included! Package List: 1 * High Quality Universal Transmitter Aluminum Case

Features: [Premium Quality & Brilliant Performance] The RC servo adopts extremely strong stainless steel gear and a full-body metal shell, 70kg torque, make sure long life and durability, high precision. [Long Service Life] The internal brushless motor has strong torque and its service life is 10 times that of the coreless motor of the same level. [Powerful Function] Fully waterproof design, its waterproof level is IP67, the steering gear can be completely immersed in water. [Multiple Application] It is used to change the torque, speed, and angle of RC toys, robots, mechanical arms, and other remote control toys. [Extra Accessory] A spare steel gear is provided as a gift, so there is no need …

Features: [Premium Quality & Brilliant Performance] The RC servo adopt extremely strong stainless steel gear and full-body metal shell, 50kg torque, make sure long life and durability, high precision. [Long Service Life] The internal brushless motor has strong torque and its service life is 10 times that of the coreless motor of the same level. [Powerful Function] Fully waterproof design, its waterproof level is IP67, the steering gear can be completely immersed in water. [Multiple Application] It is used to change the torque, speed, and angle of RC toys, robots, mechanical arms, and other remote control toys. [Extra Accessory] A spare steel gear is provided as a gift, so there is no need to …

This is a professional servo tester which is durable, easy to operatie, fully functional, small in volume and light in weight. The Servo tester uses intelligent MCU control to make it works very stable, and it's a necessary tool for RC users. Features: High performance-to-price ratio, combined with proprietary test algorithm, which guarantee that the test is fast and stable. G.T power tester can be powered by lipo battery through the balance charging wire adaptor or DC power supply. It is both convenient and flexible. The rolling menu toolbar makes the operation clear and easy. The function setting is easy and practical which covers most parameters that end users need. The device is equipped …

This product is a professional engine speed tester which is durable easy to operate, samall volume and light weight. It uses intelligent MCU to control and can work very steadily. It is an essential tool for model aircraft lovers. It applies to Rcexl series ignition, in the market the engines which use Rcexl ignition are DLE series, MT gas engine and so on. Features: Use PIC 16F628a microcontrollers Small Vokume, convenient to Carry Do not need batteries, power from itself Standard FUTABA plug Use 4 digital tube to monitor the engine's speed Mini tachometer indicates up to 30,000RPM Increased self test feature Specification: Brand name: G.T.POWER Weight: 17g Dimension: 54 * 20 * 15mm Working …

This product is specially developed for remote control cars and boats. It possesses super active and passive anti-jamming capabilities, very low power consumption and high receiving sensitivity, which is suitable for GoolRC TG3 AUSTAR AX5S transmitter. Features: High receiving sensitivity. Easy to use and convenient to take. Super active and passive anti-jamming capabilities. Very low power consumption, and stable performance. Suitable for GoolRC TG3 AUSTAR AX5S transmitter. Specifications of Receiver: Brand name: GoolRC Model name: TG3 Color: black Material: Plastic Channels: 3 Model type: RC car / boat receiver Frequency: 2.4GHz Power: 4.0-6.5V DC ANT length: 2.6cm Item size: 30 * 18 * 13mm …

This Car Light is special for RC car models, with strobing-blasting Flashing fast-slow Flashing alternately Mode and so on. Suitable for 1/10 1/8 Climbing car Rally car Monster truck short-course truck CC01 D90 SCX10 4WD model car,etc. Features: RC CH3 Controling flashing Mode. 5 flashing mode. Plastic support. Using receiver as power supply. Suitable for 1/10 1/8 Climbing car Rally car Monster truck short-course truck CC01 D90 SCX10 4WD model car and so on. Specification: Item Number: AX-501C The use of voltage:4.8~6V Method of use: the power line is connected to the receiver third channel(CH3) Size: 102*25*10mm/ 4.0 * 0.98 * 0.39in Color:Orange,Blue,Multicolor(optional) Weight: Approx.31g …

This 48DP 3.175mm 16-20T motor pinion gear is made of hight quality aluminum 7075, which is suit for brushed/brushless motors. Features: Suit for 1/10 RC cars. Originally Aluminum 7075. Hard anodized on the gear surface. A m3 set screw (12.9 level) has been added to each pinion gear. Specifications: Teeth: 16T, 17T, 18T, 19T, 20T 16T Size: diameter 9.4 * 9mm 17T Size: diameter 10 * 9mm 18T Size: diameter 10.6 * 9mm 19T Size: diameter 11.1 * 9mm 20T Size: diameter 11.6 * 9mm Diametral Pitch: 48DP Suitable shaft diameter: 3.175mm Material: Aluminum 7075 Weight: 2g / 1Pc Quantity: 5Pcs Package Information: Package size: 10 * 6 * 1cm / 4 * 2.4 * 0.4in Package weight: 13g / 0.46oz Adehesive tape …

GoolRC 32DP 3.175mm 12T~16T Pinion Motor Gear for 1/10 RC Car Brushed Brushless Motor Features: Aluminum 7075 material They are available at stock in the long time The gears are milled by precisely Tanwai milling machine A M3 set screw(12.9 level)has been added to each pinion gear Hard anodized on the gear surface Suit 1/10 cars Specifications: Teeth: 12T,13T,14T,15T,16T, Diametral Pitch: 32 DP 12T Size: diameter 10.7 * 14mm 13T Size: diameter 11.7 * 14mm 14T Size: diameter 12.4 * 14mm 15T Size: diameter 13.4 * 14mm 16T Size: diameter 14 * 14mm Suitable Shaft Diameter: 3.175mm Package Information: Package size: 10 * 6 * 1.5cm / 4 * 2.4 * 0.6in Package weight: 19g / 0.7oz Adhesive tape package …

2.4G FS-GT2 2CH Radio Model RC Transmitter & Receiver Car Boat Features: Super active and passive anti-jamming capabilities. Very low power consumption. High receiving sensitivity. Work between 2.400GHz to 2.4835GHz frequencies, divide into 160 frequency points. Use a linear spread of fine paragraph by an excess antenna. It covers the entire band width of the antenna bandwidth range. Has its own unique ID, increase the anti-jamming capability and stability. Specifications: Transmitter: Channels: 2 Channels Model Type: Car/Boat RF Power: Less than 20dbm Modulation: GFSK Code Type: Digital Sensitivity: 1024 Low Voltage Warning: Yes (less than 9v) DSC Port: Yes Charger Port: Yes Power: 12V DC …

The Body Mount is used to install car shell made of high quality material, which will make your car like a tiger that has grown wings. Features: It is tailored for 1/10 Traxxas Axial SCX10II 90046 RC Car. This product is magnetically bonded by magnets. No punching is required. This product is made from Aluminum Alloy and designed for lasting performance. The Body Mount is used to install and stable car shell without effecting performance. The item is called stealth Body Mount, namely, it will not shadow the beauty of your car. Any problem, please contact our store without hesitation. Honor to serve you. Specifications: Item Name: Body Mount Set Color: …

This differential kit is designed for WLtoys A949 A959 A969 A979 K929 A959-B A969-B A979-B K929-B Cars. Made of high-quality metal, it Features high driving efficiency, compact structure, high load-bearing capacity, and is convenient to assemble. It is the best choice of RC hobbyists to improve the car's performance. Features: This differential kit comes with 2 differential carriers, 1 drive shaft, 4 steering hubs, 2 differential gears, other gears, etc. This differential kit is designed for WLtoys A949 A959 A969 A979 K929 A959-B A969-B A979-B K929-B Cars. Made of high-quality metal to allow this kit durable in use. Make the left and right drive wheels can be rotated at different speeds.…

This motor heatsink cover with a cooling fan is compatible with WLtoys A959-B A979-B 144001 124019. Features: Size: Inner diameter: 3.5cm; Height: 4cm. Made in the high-quality alloy. It's durable. Fitting 540 550 brushed motors and 3650 brushless motors. Compatible with ?Wltoys A959-B A979-B 144001 124019 1/12 1/14 RC Car. Always keep your motor at the right temperature to make the motor work efficiently. Specifications: Name: Motor Heatsink Cover with a Cooling Fan Material: aluminum alloy+ plastics Color: blue/purple/red(optional) Size: Inner diameter: 3.6cm Height: 4cm Package information: Size: 10*8*4CM Weight: 22g Package List: 1* Motor Heatsink Cover with a Cooling Fan Note: * There …

Features: Exquisite workmanship, manufactured and tested to highest standards. Receiver for RC car and RC boat. The package includes a receiver. 7CH, Size: 35*23.3*13.3mm. If there are any problems, please contact our store in time. Specification: Model: FS-R7P Name: Receiver Main Material: Plastic Color: Black Channel: 7CH Model Type: Cars, Boats RF Frequency: 2.4Ghz ISM RF Standard: ANT Input Power: 3.5-9V/DC Weight: 8g Size: 35*23.3*13.3mm Package Information: Package Size: 12*2.8*2cm Package Weight: 15g Plastic Packaging Packing List: 1* FS-R7P Receiver

Features: Special for FlySky FS-PL18 Paladin Transmitter. 5V 2.0A input, about 7h charging time. Our leading technology will change the way you charge, more convenient and easier. Complete Charging Convenience: Instantly charge your PL18 transmitter simply by placing them in the center of the charger. Never fuss around with plugging and unplugging cables again, just set down and power up. SATISFACTION GUARANTEE: If you have any questions about the product or are not satisfied with the product, please feel free to contact us and we will provide you with the best solution. Your satisfaction is our biggest concern. Specification: Brand Name: FlySky Item Name: Wireless Charger Compatibility: FS-PL18 …

GMr is a 4-channel micro/mini car receiver, using AFHDS 3 (third-generation automatic frequency hopping digital system), single external antenna bidirectional transmission, micro size, and reserved gyro interface. The GMR receiver is compatible with RC racing cars and drifting mini cars. Features: * This 2.4CHz receiver with 4-channel is suited to DIY your RC car especially high-speed cars such as RC racing cars and drifting mini cars. * The receiver is compatible with PL18/NB4 and NB4 Lite all the transmitters which with AFHDS 3 protocol. realizing a strong anti-interference ability and quick response within 5ms, accurate response to weak signals, and active avoidance of co-channel frequency …

The FTr8B receiver adopts Flysky the third generation automatic frequency hopping digital system (AFHDS 3), which Features dual antennas and bidirectional data transmission commonly known as telemetry plus an i-bus out/s.bus terminal and PWM/PPM switching at Channel 1. Compatible with all AFHDS 3 transmitters and RF modules. Features: The FTr8B receiver is compatible with all AFHDS 3 transmitters and RF modules (including PL18, NB4, NB4 Lite, FRM302, etc.) This product can be equipped with RC toys such as fixed-wing, glider, helicopter, delta wing engineering vehicle, etc. Adopting Flysky the third generation automatic frequency hopping digital system (AFHDS 3), the FTr8B receiver is provided …