Powerline Adapters

Digitus FTTH Outdoor Distribution Box for 24 LC/Duplex, SC/ Simplex couplers

Digitus Fiber Optic Splice Box, Equipped, SC, OM3

Digitus Fiber Optic Splice Box, Equipped, LC, OS2

Digitus Fiber Optic Splice Box, Equipped, LC, OM3

Digitus Fiber Optic Outdoor Distribution Box, 8x SC SX

The equip® Fiber optic keystone adapter, designed to bridge LC Duplex fiber. The snap-in mechanical design makes it work well with both equip patch panels and wall-mounted outlets.Features:- Suitable for equip keystone system- Keystone patch panels, 769224 and 769249- Surface Mounted Box, 125121 and 125122- Keystone box, 125460- Outlets, 760303/761303, 760301/761301, 125471/125474 and 761311/761312- Selling unit: 8pcs/packSpecifications:- Approval and compliance: RoHS- Product weight (kg): 0,0065- Product breadth (mm): 17,8- Product depth (mm): 29- Product height (mm): 16,1

The Power-over-Ethernet (POE) module offers a convenient and cost effective way to deliver power to the Android I-Series. The module allows you to put a DC voltage onto specific pairs of the Ethernet cable so that devices connected to the network can use it as a power source. So instead of requiring a power drop which can be expensive you can run a low voltage network to simplify installation of solutions for shelf signage and AV applications like conference room schedulers or AV control displays.

D-Link's DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs. The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. This …

The LC Multimode adaptor is used to join two connectors together and is usually mounted in a fibre optic patch panel fibre optic breakout box and more recently in fibre optic wall outlets where a fast fibre link is required in an office environment.

The adaptors are supplied in Duplex or Quad versions.

By using high quality adapters this ensures that both ferrules are perfectly aligned and thus minimising losses.

The LC adaptor is a proven small form factor design enabling a greater number of fibre ports where space is limited.

The LC Singlemode adaptor is used to join two connectors together and is usually mounted in a fibre optic patch panel fibre optic breakout box and more recently in fibre optic wall outlets where a fast fibre link is required in an office environment.

The adaptors are supplied in Duplex or Quad versions.

By using high quality adapters this ensures that both ferrules are perfectly aligned and thus minimising losses.

The LC adaptor is a proven small form factor design enabling a greater number of fibre ports where space is limited.

The LC Multimode adaptor is used to join two connectors together and is usually mounted in a fibre optic patch panel fibre optic breakout box and more recently in fibre optic wall outlets where a fast fibre link is required in an office environment.

The adaptors are supplied in Duplex or Quad versions.

By using high quality adapters this ensures that both ferrules are perfectly aligned and thus minimising losses.

The LC adaptor is a proven small form factor design enabling a greater number of fibre ports where space is limited.

Cablenet HPOE-460 PoE adapter

CAT 6 Punchdown Krone coupler in black for connecting Cat 6 cables suitable for solid Cat 6 and colour coded for easy installation.

ALLNET ALL0488V6 PoE adapter 30 V

The Airtame PoE Adapter lets you power your Airtame 2 through a PoE connection over USB. Together with our Aircord and a PoE-enabled network you have a 3-in-1 solution that powers your Airtame connects it to your network and plugs into your display screens HDMI.


Airtame offers a Power over Ethernet (PoE) to USB adapter accessory that is used to provide DC 5V and Ethernet connection over USB to the Airtame 2. The Airtame PoE Adapter is a powered device (PD) that receives PoE from power sourcing equipment (PSE) through a shielded RJ45 connector and both transforms the power to 5V and separates the data onto the USB lines.
The accessory provides the benefit of a clean setup. The Airtame …

The Cisco Multigigabit 802.3bt Power Injector (Figure 1) is a reliable standards-compliant power injector capable of powering the latest high-performance access points and other network devices.

One of the main limitations in designing your wireless network is the availability of power. Running power cabling is also a primary cost driver of wireless installations. The Cisco Power over Ethernet (PoE) Injector allows delivery of both data and power to a Cisco access point over a single Ethernet cable allowing deployment of devices exactly where they are needed to provide the best wireless coverage at a much lower installation cost.

The Cisco 802.3bt PoE Injector provides fully compliant …

The Cisco AIR-PWRINJ6= Power over Ethernet (PoE) Injector increases wireless LAN deployment flexibility of supported Cisco Aironet access points. This PoE injector provides an alternative powering option to local power inline power-capable multiport switches and multiport power patch panels. It uses wires in an Ethernet cable to supply inline power to an access point.

Digitus 8-Port Gigabit Ethernet PoE Injektor, 802.3bt, 250 W

Axis 5027-421 PoE adapter

If you want to move to IP and it is time to replace your analog video cameras, AXIS T8640 PoE+ over Coax Adapter Kit is an efficient way to make the switch – and keep your Coax cabling. AXIS T8640 PoE+ over Coax Adapter Kit includes two adapters, one for connecting a network camera to a Coax cable and one for connecting it to the network (see Typical set-up).Let your Coax cables do double-duty:- AXIS T8640 PoE+ over Coax Adapter Kit lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of…

- Reduced installation costs
- IEEE 802.3af compliance

Easier and faster installations

Power over Ethernet (PoE) offers an easy fast and cost-effective solution for supplying power to network video products without the need to install power outlets and electrical cabling.

No need for power outlets

With the use of Axis PoE products Axis network cameras and video encoders can receive both data and power over a single Ethernet cable. Network video products can thus be installed in areas where traditional power cabling and outlets are unavailable or difficult to install.

Axis PoE midspans and PoE splitters

Axis PoE midspans provide power (max. 15.4 W per port) over Ethernet cables …

Single port PoE midspan, IEEE 802.3af (15W). The midspan can be installed on a wall, shelf or DIN rail with an accessory DIN clip.

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance a switch is normally used as a repeater or optical fiber may be used.

To overcome this distance limit network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable and forward the rest to the camera. Dependent on midspan and camera type the connection in total can be between 200-400 meters (656-1312 ft.).

Compatibility
AXIS T8129 PoE Extender is compatible with all Axis network video products supporting PoE and it is both IEEE 802.3af and IEEE 802.3at compliant. Check in the Set-up tab for information typical connections …

Digitus 4 Port Gigabit 4PPoE Extender, 802.3at, 60 W